Products for USB Sensing and Control
Quantity Available: 75
| Qty | Price |
|---|---|
| 5 | $67.20 |
| 10 | $64.40 |
The L12 Linear Actuator is an axial design with a powerful drivetrain and a rectangular cross section for increased rigidity.
The L12 actuator is designed to move push or pull loads along its full stroke length. The speed of travel is determined by the gearing of the actuator and the load or force the actuator is working against at a given point in time. When power is removed, the actuator stops moving and holds its position, unless the applied load exceeds the backdrive force, in which case the actuator will backdrive. Stalling the actuator under power for short periods of time (several seconds) will not damage the actuator
The linear actuator is an alternative to designing with gears, motors, servos and linkages. The controller sees the actuator as a standard RC servo.
This servo actuator needs to be connected to a servo controller board. If you're looking for higher torque, you should select a servo controller with an external power jack so it doesn't have to rely solely on USB power, which is limited. You can plug this servo directly to any of the boards in the list below by matching the color of the wire with the label on the board.
When controlling this device, set the speed to the maximum speed. Trying to vary the speed will produce erratic results.
| Motor Properties | |
|---|---|
| Motor Type | RC Linear Actuator (Servo) |
| Stroke Length | 100 mm |
| Maximum Speed | 12 mm/s |
| Peak Power Point | (@ 6 mm/s) 23 N |
| Peak Efficiency Point | (@ 8 mm/s) 12 N |
| Gear Ratio | 100 : 1 |
| Positional Error Max | 300 μm |
| Electrical Properties | |
| Rated Voltage | 6 V DC |
| Rated Current (on 1061 controller) | 50 mA |
| Rated Current (on 1066 controller) | 83 mA |
| Stall Current (on 1061 controller) | 450 mA |
| Stall Current (on 1066 controller) | 450 mA |
| Physical Properties | |
| Gear Train Material | Metal |
| Backdrive Force | 80 N |
| Side Force Max | 15 N |
| Weight | 56 g |
| Wire Length | 330 mm |
| Operating Temperature Min | -10 °C |
| Operating Temperature Max | 50 °C |
| Customs Information | |
| Canadian HS Export Code | 8501.10.00 |
| American HTS Import Code | 8501.10.40.60 |
| Country of Origin | CN (China) |
| Product | Motor Properties | Electrical Properties | Physical Properties | |||||
|---|---|---|---|---|---|---|---|---|
| Part Number | Price | Stroke Length | Maximum Speed | Peak Power Point | Peak Efficiency Point | Gear Ratio | Rated Voltage | Weight |
 RC Linear Actuator - 50mm - 23N
|
$70.00 | 50 mm | 12 mm/s | (@ 6 mm/s) 23 N | (@ 6 mm/s) 12 N | 100 : 1 | 6 V DC | 40 g |
 RC Linear Actuator - 100mm - 23N
|
$70.00 | 100 mm | 12 mm/s | (@ 6 mm/s) 23 N | (@ 8 mm/s) 12 N | 100 : 1 | 6 V DC | 56 g |
