Products for USB Sensing and Control
This connector can be attached to any K-type thermocouple by securing the exposed wires into the screw terminals, allowing for simple, solderless connectivity with other thermocouple wires. When you connect your thermocouple wires to either end of this adapter, make sure that you match it so that wires of the same polarity are connected. If you do not, you may experience instability and incorrect sensor data.
If you need your thermocouples to reach further, you can use this connector with a segment of 3112 - K-Type Thermocouple Extension Wire.
Thermocouples cannot easily be soldered, since adding an additional metal junction will throw off the readings. The following products will help connect or extend thermocouple wires.
$4.00/Meter
You can use this connector to connect one of the following thermocouples to a piece of thermocouple extension wire, or to make an easy disconnect/reconnect point between your thermocouples and your interface.
| Product | Temperature Sensor | ||||
|---|---|---|---|---|---|
| Part Number | Price | Thermocouple Type | Ambient Temperature Min | Ambient Temperature Max | Ambient Temperature Error Max |
 K-Type Fiberglass Bead Probe Thermocouple
|
$10.00 | K | -40 °C | 400 °C | ± 0.75 °C |
 K-Type Probe Thermocouple 11cm
|
$16.00 | K | -40 °C | 400 °C | 3.3 °C |
 K-Type Probe Thermocouple 20cm
|
$16.00 | K | -40 °C | 400 °C | 3.3 °C |
 K-Type Probe Thermocouple 30cm
|
$20.00 | K | -40 °C | 400 °C | 3.3 °C |
 K-Type Teflon Bead Probe Thermocouple (-40°C to +200°C)
|
$5.00 | K | -40 °C | 200 °C | ± 0.75 °C |
| Physical Properties | |
|---|---|
| Thermocouple Type | K-Type |
| Customs Information | |
| Canadian HS Export Code | 9025.19.00 |
| American HTS Import Code | 9025.19.80.85 |
| Country of Origin | CN (China) |
