View source for MOT0110 User Guide

__NOINDEX__
__NOTOC__
<metadesc></metadesc>
[[Category:UserGuide]]
==Part 1: Setup==
<div class="phd-deck-sequence">
{{PT1_MOT0110_CHOOSE}}
{{PT1_MOT0110_WIN}}{{PT1_MOT0110_MAC}}{{PT1_MOT0110_LNX}}
</div>
== Part 2: Using Your Phidget ==

===About===
The MOT0110 combines an accelerometer (±16g), gyroscope (± 2000°/s), and magnetometer 	(± 8 G).  Each sensor measures in the x, y, and z-axis. You can use the Spatial object to obtain data from all three sensors, synchronized to the same timestamp and combined to provide pitch/roll/yaw or quaternion rotation.

[[Image:MOT0110-About.jpg|link=]]

===Explore Your Phidget Channels Using The Control Panel===

You can use your Control Panel to explore your Phidget's channels.

'''1.''' Open your Control Panel, and you will find the following channels:

[[Image:MOT0110_Panel.jpg|link=|center]]

'''2.''' Double click on a channel to open an example program. Each channel belongs to a different channel class:

{{UGC-Start}}

{{UGC-Entry|Accelerometer:| Reports the acceleration of the MOT0110 in the X, Y and Z axis|
In your Control Panel, double click on "3-Axis Accelerometer":

For a more comprehensive look at how to use this example, take a look at the [[Accelerometer Guide]]

[[Image:MOT0110-Accelerometer.jpg|center|link=]]}}

{{UGC-Entry|Gyroscope:| Reports the angular velocity of the MOT0110 along the X, Y, and Z plane|
In your Control Panel, double click on "3-Axis Gyroscope":

For a more comprehensive look at how to use this example, take a look at the [[Gyroscope Guide]]

[[Image:MOT0110-Gyroscope.jpg|center|link=]]}}

{{UGC-Entry|Magnetometer:| Reports the magnetic field strength in the X, Y, and Z-axis|
In your Control Panel, double click on "3-Axis Magnetometer":

For a more comprehensive look at how to use this example, take a look at the [[Magnetometer Guide]]

[[Image:MOT0110-Magnetometer.jpg|center|link=]]}}

{{UGC-Entry|Spatial:| Reports synchronized data from all three objects at once (Accelerometer, Gyroscope, and Magnetometer)|
In your Control Panel, double click on "Spatial":

For a more comprehensive look at how to use this example, take a look at the [[Spatial Guide]]

[[Image:MOT0110-Spatial.jpg|center|850px|link=]]}}

{{UGC-Entry|Temperature Sensor:| Measures the temperature inside the enclosure|
A temperature sensing chip and self-heating element is present on the MOT0110 so the Phidget22 libraries can keep the inside of the enclosure at 50°C for optimal performance. This feature is disabled by default, and can be enabled through the Spatial, Magnetometer, Accelerometer, or Gyroscope API. 

This temperature data is also available so you can tell when the board has reached the target temperature.

In your Control Panel, double click on "Temperature Sensor":

[[Image:MOT0110-Temp.jpg|center|link=]]}}

{{UGC-End}}


{{UG-Part3}}

== Part 4: Advanced Topics and Troubleshooting ==
{{UGC-Start}}
{{UGC-Addressing}}
{{UGC-Graphing}}
{{UGC-Firmware}}
{{UGC-AHRS}}
{{UGC-VINTSpeed}}
{{UGC-DataInterval}}
{{UGC-CompassCal}}
{{UGC-SpatialTemp|50}}
{{UGC-SpatialMounting}}
{{UGC-ZeroGyro}}
{{UGC-Shield}}
{{UGC-End}}