Template:UgVoltageInputSensor: Difference between revisions

Revision as of 23:11, 12 June 2017

[[Image:{{{1}}}_VoltageInputSensor_Example.jpg|right|link=]]

When you double click on an Voltage Input object, a window like the one pictured will open.

At the top of the window, information about your device and the properties of this particular channel will be listed.
On the left, change trigger and/or data interval can be changed. For more information on these settings, see the Data Rate/Change Trigger page.
On the right, the current reading of the raw voltage is listed beside "Voltage". Below, you can select the type of sensor you have connected to any of the sensors sold by Phidgets. When you do, the sensor value below will convert the raw voltage into the appropriate measurement in the units of that sensor.

@@ Line 1: / Line 1: @@
 ===Voltage Input===
-Double-click on a Voltage Input object in order to run the example:
-[[Image:{{{1}}}_VoltageInputSensor_Example.jpg|link=|center]]
+[[Image:{{{1}}}_VoltageInputSensor_Example.jpg|right|link=]]
-Information about the Phidget and the properties of the particular channel will be listed at the top of the window. You can also experiment with the following functionality:
+When you double click on an Voltage Input object, a window like the one pictured will open.
+* At the top of the window, information about your device and the properties of this particular channel will be listed.
+* On the left, change trigger and/or data interval can be changed. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|Data Rate/Change Trigger]] page.
+* On the right, the current reading of the raw voltage is listed beside "Voltage". Below, you can select the type of sensor you have connected to any of the sensors sold by Phidgets. When you do, the sensor value below will convert the raw voltage into the appropriate measurement in the units of that sensor.
+<br clear="all">