Template:UgVoltageInputSensor: Difference between revisions

From Phidgets Support
No edit summary
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
===Voltage Input===
===Voltage Input===
Double-click on a Voltage Input object in order to run the example:
[[Image:{{{1}}}_VoltageInputSensor_Example.jpg|center|link=]]


[[Image:{{{1}}}VoltageInputSensor_Example.jpg|right|link=]]


When you double click on an Voltage Input object, a window like the one pictured will open.  
{{UGExampleDescription}}
*Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page.
*If you have an analog sensor connected that you bought from us, you can select it from the ''Sensor Type'' drop-down menu. The example will then convert the voltage into a more meaningful value based on your sensor, with units included, and display it beside the ''Sensor Value'' label. Converting voltage to a ''Sensor Value'' is not specific to this example, it is handled by the Phidget libraries, with functions you have access to when you begin developing!
<br clear="all">


* At the top of the window, information about your device and the properties of this particular channel will be listed.
For more information about Voltage Inputs, check out the [[Voltage Input Primer]].
* On the left, change trigger and/or data interval can be changed. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|Data Rate/Change Trigger]] page.
* On the right, the current reading of the raw voltage is listed beside "Voltage". Below, you can select the type of sensor you have connected to any of the sensors sold by Phidgets. When you do, the sensor value below will convert the raw voltage into the appropriate measurement in the units of that sensor.
<br clear="all">

Latest revision as of 16:35, 27 August 2018

Voltage Input

Double-click on a Voltage Input object in order to run the example: [[Image:{{{1}}}_VoltageInputSensor_Example.jpg|center|link=]]


General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
  • If you have an analog sensor connected that you bought from us, you can select it from the Sensor Type drop-down menu. The example will then convert the voltage into a more meaningful value based on your sensor, with units included, and display it beside the Sensor Value label. Converting voltage to a Sensor Value is not specific to this example, it is handled by the Phidget libraries, with functions you have access to when you begin developing!


For more information about Voltage Inputs, check out the Voltage Input Primer.

Retrieved from "https://www.phidgets.com/docs/index.php?title=Template:UgVoltageInputSensor&oldid=29820"