Language - Android Java: Difference between revisions

From Phidgets Support
 
(27 intermediate revisions by 7 users not shown)
Line 1: Line 1:
[[Category:Language]]
#REDIRECT [[Language_-_Java_Android_Studio_Android]]
[[File:Icon-Android.png‎|64x64px|link=]] Android Java is the main language used to program for the [[OS - Android|Android OS]].
 
 
__TOC__
 
==Introduction==
 
{{LanguageSupport|Android|nearly the complete Phidget API, including events, and only excepting a few open() calls outlined later|the Phidget Interface Kit and two Hello World examples.|Eclipse on Windows, Mac OS, and Linux|}}
 
==Quick Downloads==
{{QuickDownloads|Android|
{{APIQuickDownloads|http://www.phidgets.com/documentation/JavaDoc.zip}}|
{{ExampleQuickDownloads|http://www.phidgets.com/downloads/examples/android-examples_2.1.8.20120216.tar.gz|(and Phidget Android Library)}}|
{{ExtraLibraryQuickDownloads|http://www.phidgets.com/downloads/examples/android-examples_2.1.8.20120216.tar.gz||(Phidget21.jar included in Examples)}}
{{WindowsQuickDownloads}}
{{MacQuickDownloads}}
{{LinuxQuickDownloads}}
}}
 
==Getting Started with Android Java (Eclipse)==
 
If you are new to writing code for Phidgets, we recommend starting by running, then modifying existing examples. This will allow you to:
{{ExampleCodeReasons}}
 
As Android development is primarily done on Eclipse, and Eclipse is relatively platform-independent, we provide instructions for Eclipse rather than by operating system.
 
For basic differences on installing and setting up Eclipse on your development system, you can try the [[OS - Android|Android Operating System]] page.  However, your best bet for information about general use of Eclipse on your development operating system (Windows, Mac, or Linux) will be the [http://www.eclipse.org/documentation/ Eclipse support page] or the Internet at large.
 
Phidgets can run directly plugged in to Android devices with a USB port and system 3.1 or later. 
 
Otherwise, Android can control a Phidget remotely over a network, by using the [[Phidget Webservice]]
 
Hence, we split instructions up by Android OS version number.
 
===Android Under 3.1 (and/or no USB Port)===
 
These types of phones and tablets can use Phidgets only remotely over a network using the [[OS - Android#Webservice|Phidget Webservice]].
 
====Use Our Examples====
 
Download and unpack the [http://www.phidgets.com/downloads/examples/android-examples_2.1.8.20120216.tar.gz Phidget Examples for Android].  There are two Hello World examples: {{Code|HelloWorldRemote}} (the one you want), and {{Code|HelloWorld}} (for tablets with a USB port).
 
Import the {{Code|HelloWorldRemote}} example into Eclipse:
* File → Import... → General → Existing Projects Into Workspace → (Next)
* Select {{Code|HelloWorldRemote}} root directory → Select all files → Finish
 
Next, you '''must change''' the IP address within the example code to the IP address of the computer directly connected to the Phidget you are trying to control.  This happens on the line that says something like:
<div class="source">
<syntaxhighlight lang=java>
device.open("192.168.3.133", 5001);
</syntaxhighlight>
</div>
 
Also, note that the HelloWorldRemote example was written for Android 2.1.  If needed, you can change this in:
(Right Click on Project) &rarr; Properties &rarr; Resource (on left) &rarr; Android
 
To run the example: Right-click on project in Package Explorer (To open the Package Explorer, use Window &rarr; Show View &rarr; Package Explorer)
 
Select Run As... &rarr; Android Application
 
This will bring up the Android Virtual Device manager window.  If your Android hardware is plugged in to your debugging computer, you will see the hardware as an option on which to run the example.  You should run it directly on your Android device, unless you are comfortable setting up the emulator to run on your local network.
 
After the {{Code|HelloWorldRemote}} application starts running on your Android device:
# Make sure the Phidget Webservice is running on the computer with the IP address you put into the code
#*For directions on how to set up and run the webservice on a remote computer, refer to the page [[Software Overview#Operating System Support|for that operating system]]
# Plug a Phidget into that computer
 
And on your Android device, depending on which Phidget you plug in, you should see something like:
 
[[Image:android_helloworld_remotehello.png|700px|alt=|link=]]
 
And when you unplug that Phidget from the remote computer, you should see something like this on your Android device:
 
[[Image:android_helloworld_remotegoodbye.png|700px|alt=|link=]]
 
If you have the specific Phidget for the other included Android examples (i.e. the InterfaceKit), you can run the other examples in the same way.
 
To envision the system in the background, you can refer to the Webservice section on the [[OS - Android]] page.
 
====Write Your Own Code====
 
To write your own code from scratch, start with an Android project in Eclipse (File &rarr; New &rarr; Android Project).  Then....
 
=====Step One: Link the Phidget Libraries to your Project=====
 
When you download and unzip the [http://www.phidgets.com/downloads/examples/android-examples_2.1.8.20120216.tar.gz Phidget Examples for Android], each project folder will (in addition to the project files themselves) contain three things:
# A libs/ folder (containing an armabi/ folder and a single file called libphidget21.so)
# A jar file containing the general Phidget java library (phidget21.jar)
# A jar file for directly driving USB devices from a USB port on the Android device (PhidgetsUSB.jar)
 
Copy the {{Code|libs}} folder, the {{Code|PhidgetsUSB.jar}} file, and the {{Code|phidget21.jar}} file to your project folder.
 
To install libraries to run a Phidget '''remotely''' over a network using the Webservice:
# Add the libs/ folder to your project
#* To add the libs/ folder in Eclipse, simply place it in the root folder of your project
# Add the phidget21.jar file to your project
#* In Eclipse use the top-bar menu: Project &rarr; Properties &rarr; Java Build Path &rarr; Libraries (tab) &rarr; Add JAR
 
=====Step Two: Give your Program Permission to use the Internet=====
 
Add the following to your <code>AndroidManifest.xml</code> file:
 
<div class="source"><syntaxhighlight lang=xml>
    <uses-permission android:name="android.permission.INTERNET"></uses-permission>
</syntaxhighlight></div>
 
=====Step Three: Include the Phidget Libraries in your Source=====
 
Then, in your code, include an {{Code|import}} reference to the library. In Android Java:
 
<div class="source"><syntaxhighlight lang=java>
  // This contains all of the devices and the exceptions
  import com.phidgets.*;
  // This contains all of the event listeners
  import com.phidgets.event.*;
</syntaxhighlight></div>
 
Then you are ready to begin coding!
 
===Android 3.1+ with USB Port===
 
If your tablet has a USB host port and is running Android 3.1 or later, you can plug Phidgets directly into it.
 
====Use Our Examples====
 
Download and unpack the [http://www.phidgets.com/downloads/examples/android-examples_2.1.8.20120216.tar.gz Phidget Examples for Android].  There are two Hello World examples: {{Code|HelloWorld}} (the one you want), and {{Code|HelloWorldRemote}} (for controlling Phidgets over the Webservice).
 
Import the {{Code|HelloWorld}} example into Eclipse:
* File &rarr; Import... &rarr; General &rarr; Existing Projects Into Workspace &rarr; (Next)
* Select {{Code|HelloWorldRemote}} root directory &rarr; Select all files &rarr; Finish
 
Note that the HelloWorld example was written for Android 3.1.  If needed, you can change this in:
(Right Click on Project) &rarr; Properties &rarr; Resource (on left) &rarr; Android
 
To run the example: Right-click on project in Package Explorer (To open the Package Explorer, use Window &rarr; Show View &rarr; Package Explorer)
 
Select Run As... &rarr; Android Application
 
This will bring up the Android Virtual Device manager window.  If your Android hardware is plugged in to your debugging computer, you will see the hardware as an option on which to run the example.  You should run it directly on your Android device, unless you are comfortable setting up the emulator to use your development computer's USB hub.
 
After the {{Code|HelloWorld}} application starts running on your Android device, plug a Phidget into your Android tablet's USB port!
 
Since the USB device requires special permission, the first thing you will probably see is a request from the Phidget example to use the USB port:
 
[[Image:android_helloworld_usb_permissions.png|500px|alt=|link=]]
 
And on your Android device, depending on which Phidget you plug in, you should see something like:
 
[[Image:android_helloworld_hello.png|700px|alt=|link=]]
 
And when you unplug that Phidget from the remote computer, you should see something like this on your Android device:
 
[[Image:android_helloworld_goodbye.png|700px|alt=|link=]]
 
If you have the specific Phidget for the other included Android examples (i.e. the InterfaceKit), you can run the other examples in the same way.
 
If you are having trouble running the examples, a method to debug the Android USB port is on the [[OS - Android]] page, under the Hardware section.
 
====Write Your Own Code====
 
To write your own code from scratch, start with an Android project in Eclipse (File &rarr; New &rarr; Android Project).  Then....
 
=====Step One: Link the Phidget Libraries to your Project=====
 
When you download and unzip the [http://www.phidgets.com/downloads/examples/android-examples_2.1.8.20120216.tar.gz Phidget Examples for Android], each project folder will (in addition to the project files themselves) contain three things:
# A libs/ folder (containing an armabi/ folder and a single file called libphidget21.so)
# A jar file containing the general Phidget java library (phidget21.jar)
# A jar file for directly driving USB devices from a USB port on the Android device (PhidgetsUSB.jar)
 
Copy the {{Code|libs}} folder, the {{Code|PhidgetsUSB.jar}} file, and the {{Code|phidget21.jar}} file to your project folder.
 
To install libraries to run a Phidget '''remotely''' over a network using the Webservice:
# Add the libs/ folder to your project
#* To add the libs/ folder in Eclipse, simply place it in the root folder of your project
# Add the phidget21.jar file to your project
# Also add the PhidgetsUSB.jar file to your project
#* In Eclipse, to add jar files use the top-bar menu: Project &rarr; Properties &rarr; Java Build Path &rarr; Libraries (tab) &rarr; Add JAR
 
=====Step Two: Give your Program Permission to use USB=====
 
Add the following to your <code>AndroidManifest.xml</code> file:
 
<div class="source"><syntaxhighlight lang=xml>
    <uses-feature android:name="android.hardware.usb.host" />
</syntaxhighlight></div>
 
=====Step Three: Include the Phidget Libraries in your Source=====
 
Then, in your code, include an {{Code|import}} reference to the library. In Android Java:
 
<div class="source"><syntaxhighlight lang=java>
  // This contains all of the devices and the exceptions
  import com.phidgets.*;
  // This contains all of the event listeners
  import com.phidgets.event.*;
</syntaxhighlight></div>
 
Then you are ready to begin coding!
 
==Follow the Examples==
 
By following the instructions above, you probably now have a working example and want to understand it better so you can change it to do what you want. This section has resources for you to learn from the examples and write your own.
 
Programming with Phidgets in MATLAB makes extensive use of the mainstream Java Phidgets library, so the Java API reference will be helpful:
 
{{UsingAPhidgetInCodeGeneral|although you can only use the event code in Android|[http://www.phidgets.com/documentation/JavaDoc.zip Java API]}}
 
===API Support===
 
Most of the Java API is supported in Android.  However, only some of the available open calls are supported:
 
When using a Phidget over a network, you can open the remote Phidget using one of the supported Java API calls:
<div class="source"><syntaxhighlight lang=java>
void open(int serial, java.lang.String ipAddress, int port)
void open(int serial, java.lang.String ipAddress, int port, java.lang.String password)
void openAny(java.lang.String ipAddress, int port)
void openAny(java.lang.String ipAddress, int port, java.lang.String password)
void openLabel(java.lang.String label, java.lang.String ipAddress, int port)
void openLabel(java.lang.String label, java.lang.String ipAddress, int port, java.lang.String password)
</syntaxhighlight></div>
 
When using a Phidget when it is directly plugged in to an Android 3.1 or later tablet, you can use one of these supported Java API calls:
<div class="source"><syntaxhighlight lang=java>
void open(int serial)
void openAny()
void openLabel(java.lang.String label)
</syntaxhighlight></div>
 
This leaves these Java API calls, which are '''unsupported''' on Android:
<div class="source"><syntaxhighlight lang=java>
void open(int serial, java.lang.String serverID)
void open(int serial, java.lang.String serverID, java.lang.String password)
void openAny(java.lang.String serverID)
void openAny(java.lang.String serverID, java.lang.String password)
void openLabel(java.lang.String label, java.lang.String serverID)
void openLabel(java.lang.String label, java.lang.String serverID,
java.lang.String password)
</syntaxhighlight></div>
 
===Code Snippets===
 
Specific calls in Android Java will differ in syntax from those on the [[General Phidget Programming]] page, but the concepts stay the same. 
 
It may help to have the [[General Phidget Programming]] page and this section open at the same time, because they parallel each other and you can refer to the Android Java syntax.  However, many additional concepts are covered on the General Phidget Programming page on a high level, such as using multiple Phidgets, handling errors, and different styles of programming.
 
For example, if we were using a [[Product - 1018 - PhidgetInterfaceKit 8/8/8 | Phidget Interface Kit]] as our device, the general calls would look like this:
 
====Step One: Initialize and Open====
 
For opening a remote Phidget over the network using the Webservice:
 
<div class="source"><syntaxhighlight lang=java>
  InterfaceKitPhidget device;
  device = new InterfaceKitPhidget();
 
  // Open first detected Interface Kit, remotely with IP address and port
  device.open("192.168.3.33", 5001);
</syntaxhighlight></div>
 
For opening a Phidget directly attached to the tablet's USB port:
 
<div class="source"><syntaxhighlight lang=java>
 InterfaceKitPhidget device;
com.phidgets.usb.Manager.Initialize(this);
device = new InterfaceKitPhidget();
 
// Open locally, with Phidget in tablet USB port
 ik.open("192.168.3.33", 5001);
</syntaxhighlight></div>
 
The direct open call prevents any other instances from retrieving data from the Phidget, including other programs.
The one connection per device limit does not apply when exclusively using the Phidget Webservice.
 
Both open calls will tell the program to continuously try to connect to a Phidget, based on the parameters given, even trying to reconnect if it gets disconnected.
This means that simply calling open does not guarantee you can use the Phidget immediately. We can handle this by using event driven programming and tracking the AttachEvents and DetachEvents....
 
====Step Two: Wait for Attachment (plugging in) of the Phidget====
 
To use the Phidget, it must be plugged in and a software event caught (i.e. attached).
 
Android Java is '''only''' event-driven, so you cannot use {{Code|waitForAttachment()}} without hanging and being relatively unsafe with your threads.  Instead, you should define an event handler function that you can then synchronize and tie in with the attachment event itself.
 
First, let's write our handler:
 
<div class="source"><syntaxhighlight lang=java>
  class AttachEventHandler implements Runnable {
    Phidget device;
    TextView eventOutput;
 
    public AttachEventHandler(Phidget device, TextView eventOutput) {
      this.device = device;
      this.eventOutput = eventOutput; }
 
    public void run() {
      try {
        // The actual useful thing our handler does
eventOutput.setText("Hello " + device.getDeviceName() + ", Serial " + Integer.toString(device.getSerialNumber()));
      } catch (PhidgetException e) { e.printStackTrace(); }
       
      // Notify whoever called us (and is waiting) that we're done
      synchronized(this) { this.notify(); }
    }
  }
</syntaxhighlight></div>
 
This may seem complex, but really it is just:
# A class wrapper so we can work independently once we get permission from the main thread, and
# A way to call back to the {{Code|synchronized()}} call to let them know we're done and stay thread safe
 
Now that we have our 'handler' we can hook it in as an event function to trigger on device attachment:
 
<div class="source"><syntaxhighlight lang=java>
device.addAttachListener(new AttachListener() {
  public void attached(final AttachEvent attachEvent) {
    AttachEventHandler handler = new AttachEventHandler(attachEvent.getSource(), eventOutput);
 
    // This is synchronised in case more than one device is attached before one completes attaching
    synchronized(handler) {
 
      runOnUiThread(handler);
      try { handler.wait(); } catch (InterruptedException e) { e.printStackTrace(); }
    }
  }
});
</syntaxhighlight></div>
 
====Step Three: Do Things with the Phidget====
 
Again, because Android is event driven, use buttons (or timers) to schedule events if you want to poll the device at a certain interval or user specification.  Otherwise, simply set the sensitivity and/or data rate (depending on your device
 
===Step Four: Close and Delete===
 
 
 
At the end of your program, don’t forget to call close to free any locks on the Phidget.
 
<div class="source"><syntaxhighlight lang=java>
  ik.close();
  ik = null;
</syntaxhighlight></div>
 
===Event Driven Programming===
 
We recommend the use of event driven programming when working with Phidgets. In Java, we hook
an event handler with the following code: 
 
<div class="source"><source lang=java>
  ik.addSensorChangeListener(new SensorChangeListener()
  {
      public void sensorChanged(SensorChangeEvent se)
      {
        //Insert your code here
        System.out.println(se.getValue());
      }
  });
</source></div>
 
With this method, the code inside sensorChanged will get executed every time the PhidgetInterfaceKit reports a change on one of its analog inputs.
The items from the event, such as the index or reported value, can be accessed from the SensorChangeEvent object properties.
Some events such as Attach and Detach belong to the base Phidget object and thus are common to all types of Phidgets.
Please refer to the API manual for a full list of events and their usage.
 
===Working Directly With the Phidget===
 
Some values can be directly read and set on the Phidget. Simply use the instance’s properties or call member functions such as  getSensorValue(int index) or setOutputState(int index, boolean newVal) for PhidgetInterfaceKits.
These methods can be used inside a polling loop as an alternative to event driven programming.
 
===Working With Multiple Phidgets===
 
 
===Other Phidgets===
 
==Common Problems and Solutions/Workarounds==
 
This section contains some Android Java and Eclipse-specific common problems.  For more answers about using Phidgets, visit our forums, FAQ, or contact us.
 
{{ProblemSolution|Eclipse Error|Unable to get view server protocol version from device emulator}}
 
Likely Fix: Project &rarr; Clean... &rarr; Clean All  (If that does not work, clean again and restart Eclipse)
 
{{ProblemSolution|Eclipse Error|Android requires compiler compliance level 5.0 or 6.0. Found 'X.Y' instead}}
 
Likely Fix: This may happen when running the examples.  The javac and java version on the example do not match those on your computer.
* Find the version of java and javac on your computer (for example, <code>java -version</code> on the command line)
* In Eclipse, open the Package Explorer (Window &rarr; Show View &rarr; Package Explorer)
* Find the project, right-click and select Properties
* In Properties &rarr; Java Compiler &rarr; (Checkbox) Enable Project Specific Settings &rarr; Set Compiler Compliance Level = Java Version &rarr; Apply
* When told this requires rebuild, say Rebuild Now

Latest revision as of 20:10, 4 July 2019

Redirect to:

Retrieved from "https://www.phidgets.com/docs/index.php?title=Language_-_Android_Java&oldid=31393"