HUB0001 User Guide: Difference between revisions
No edit summary |
No edit summary |
||
| Line 94: | Line 94: | ||
{{UGC-Graphing}} | {{UGC-Graphing}} | ||
{{UGC-DataInterval}} | {{UGC-DataInterval}} | ||
{{UGC-Entry|High-speed VINT Ports [[Image:speedicon_t.png|link=|25px]]| | |||
| | |||
[[Image:hispeed.jpg|link=|right]] | |||
Ports 0, 1 and 2 on the HUB0001 support increased communication speed with some newer VINT devices. If the device has a [[Image:speedicon.jpg|link=|25px]] icon printed on the enclosure, you can set communication speeds of up to 1Mbps, which will allow shorter data intervals. The communication speed is modified in the device API, not the Hub, so you can refer to the {{Phidget22API}} for the device for more information. | |||
''Note: The first run of HUB0001 did not have the [[Image:speedicon.jpg|link=|25px]] on the enclosure, but it still has the functionality described above.'' | |||
}} | |||
{{UGC-Entry|Improved Immunity and Maximum Cable Length [[Image:shieldicon_t.png|link=|25px]]| | |||
| | |||
The HUB0001 provides improved immunity to electromagnetic interference on the Phidget Cable connection when used with some newer VINT devices. If the device has a [[Image:shieldicon.jpg|link=|25px]] icon printed on the enclosure, the connection will have improved immunity when used with any of the HUB0001's six VINT ports. | |||
As a result, the maximum possible length of the Phidget cable between the VINT Hub and device is potentially increased to as much as 50 meters. The actual maximum distance increase varies depending on the power consumption of the device. If your device has the [[Image:shieldicon.jpg|link=|25px]] printed on its enclosure, you can check the specifications tab on the product page for cable length limits depending on the gauge of wire used. | |||
''Note: The first run of HUB0001 did not have the [[Image:shieldicon.jpg|link=|25px]] on the enclosure, but it still has the functionality described above.'' | |||
}} | |||
{{UGC-Entry|VINT Ports| | {{UGC-Entry|VINT Ports| | ||
| | | | ||
Revision as of 17:07, 2 March 2022
Part 1: Setup
Part 2: Using Your Phidget
About
The VINT Hub provides a stable interface to connect your devices to your computer via USB. The VINT Hub has 6 ports. Each port can:
- Connect to a VINT Device
- Read a 0-5V Voltage or ratiometric sensor (connect to Analog Input sensors)
- Act as a digital output (control LEDs, relays, digital circuits, and other simple electronics)
- Act as a digital input (read the state of a switch)
The HUB0001 has improved performance on some newer VINT devices. For more details, see the Advanced Topics section at the bottom of this page.
Explore Your Phidget Channels Using the Control Panel
The VINT Hub is a connecting point between your computer and device allowing for simple communication. You can use your Control Panel to view your attached Phidgets. Explore the 5 types of connections bellow:
VINT Devices like the TMP1101 or DCC1003 are Phidgets that digitally communicate with the VINT Hub. Each device will have unique features, so it is recommended you visit the individual product page for more details.
When attached correctly these Phidgets will appear by name in your Control Panel, with each channel listed below the name. For example, when the HUM1000 is attached you will see:
Digital Input is one of the VINT Hub’s built-in Channel Classes. Any of the these ports can act as an active-low digital input, making them useful for reading switches and buttons. The above image provides an example of how to wire a switch to be used with the VINT Hub.
If you open Digital Input Mode in the Control Panel you will be able to see the state of your button/switch.
Digital Output is one of the VINT Hub’s built-in Channel Classes. Any of these ports can be used as a 3.3V digital output, making them useful for blinking LEDs. The above image demonstrates how to connect your LED to be used with the VINT Hub.
Open Digital Output Mode in the Control Panel to control the 3.3V output.
Voltage Input is one of the VINT Hub’s built-in Channel Classes. Any of these ports can be used to read voltage, making them great for reading non-ratiometric sensors and monitoring 5V digital circuits.
Open Voltage Input Mode in the Control Panel to view your device’s output voltage.
Voltage Ratio Input is one of the VINT Hub’s built-in Channel Classes. Any of these ports can act as a Voltage Ratio Input comparing the voltage provided to the voltage returned by the device, making it useful for connecting ratiometric sensors. The voltage ratio is reported in Volts per Volt. For example, if the Phidget is providing 5V and the sensor is sending back 2.5V, the ratio will be 0.5V/V.
Open Voltage Ratio Input Mode in the Control Panel to view your device’s voltage ratio.
Part 3: Create your Program
Part 4: Advanced Topics and Troubleshooting
Before you open a Phidget channel in your program, you can set these properties to specify which channel to open. You can find this information through the Control Panel.
1. Open the Control Panel and double-click on the red map pin icon:
2. The Addressing Information window will open. Here you will find all the information you need to address your Phidget in your program.
See the Phidget22 API for your language to determine exact syntax for each property.
Note: Graphing and logging is currently only supported in the Windows version of the Phidget Control Panel.
In the Phidget Control Panel, open the channel for your device and click on the 
icon next to the data type that you want to plot. This will open up a new window:
If you need more complex functionality such as logging multiple sensors to the same sheet or performing calculations on the data, you'll need to write your own program. Generally this will involve addressing the correct channel, opening it, and then creating an Event Handler and adding graphing/logging code to it.
The quickest way to get started is to download some sample code for your desired programming language and then search google for logging or plotting in that language (e.g. "how to log to csv in python") and add the code to the existing change handler.
Filtering
You can perform filtering on the raw data in order to reduce noise in your graph. For more information, see the Control Panel Graphing page.
Graph Type
You can perform a transform on the incoming data to get different graph types that may provide insights into your sensor data. For more information on how to use these graph types, see the Control Panel Graphing page.
The Change Trigger is the minimum change in the sensor data needed to trigger a new data event.
The Data Interval is the time (in ms) between data events sent out from your Phidget.
The Data Rate is the reciprocal of Data Interval (measured in Hz), and setting it will set the reciprocal value for Data Interval and vice-versa.
You can modify one or both of these values to achieve different data outputs. You can learn more about these properties here.
Ports 0, 1 and 2 on the HUB0001 support increased communication speed with some newer VINT devices. If the device has a 
icon printed on the enclosure, you can set communication speeds of up to 1Mbps, which will allow shorter data intervals. The communication speed is modified in the device API, not the Hub, so you can refer to the Phidget22 API for the device for more information.
Note: The first run of HUB0001 did not have the on the enclosure, but it still has the functionality described above.
The HUB0001 provides improved immunity to electromagnetic interference on the Phidget Cable connection when used with some newer VINT devices. If the device has a 
icon printed on the enclosure, the connection will have improved immunity when used with any of the HUB0001's six VINT ports.
As a result, the maximum possible length of the Phidget cable between the VINT Hub and device is potentially increased to as much as 50 meters. The actual maximum distance increase varies depending on the power consumption of the device. If your device has the printed on its enclosure, you can check the specifications tab on the product page for cable length limits depending on the gauge of wire used.
Note: The first run of HUB0001 did not have the on the enclosure, but it still has the functionality described above.
For more information on the capabilities of the ports on the VINT Hub, see the VINT Primer.
When opening channels with Phidgets, you can set several properties to make sure you are accessing the precise channel you want. The HUB0001 has a unique serial number that can be used to find its ports or any VINT devices connected to them. If you want something more customizable and human-readable, you can use the device label instead. You can customize the device label by using writeDeviceLabel on the Hub object after it has been opened.
With the device label, you can address any of the VINT Hub's channels, or any connected VINT device channels. The device label will remain after the VINT Hub is unplugged as it is stored in flash memory.
