POT2001 User Guide: Difference between revisions
No edit summary |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 17: | Line 17: | ||
{{UGcontrolpanelSensor|POT2001|HUB0001}} | {{UGcontrolpanelSensor|POT2001|HUB0001}} | ||
{{ | ===Voltage Ratio Input=== | ||
Double-click on a the Voltage Ratio Input object that corresponds to the hub port you plugged the slider into. This will run the example: | |||
[[File:HUB0001-VoltageRatio.jpg|link=|center]] | |||
{{UGExampleDescription}} | |||
*Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page. | |||
*Move the slider back and forth to see the Voltage ratio change from 0.0 V/V to 1.0 V/V. | |||
<br clear="all"> | |||
==Technical Details== | ==Technical Details== | ||
Latest revision as of 16:53, 29 July 2022
Getting Started
Welcome to the POT2001 user guide! In order to get started, make sure you have the following hardware on hand:
- POT2001 - Slider 60
- Any Phidget with a Voltage Ratio Input port, here are some compatible products. We will be using the VINT Hub for this guide.
- USB cable and computer
- Phidget cable
Next, you will need to connect the pieces:
- Connect the POT2001 to the VINT Hub with the Phidget cable.
- Connect the VINT Hub to your computer with the USB cable.
Now that you have everything together, let's start using the POT2001!
Using the Slider
Phidget Control Panel
In order to demonstrate the functionality of the POT2001, we will connect it to the HUB0001, and then run an example using the Phidget Control Panel on a Windows machine.
The Phidget Control Panel is available for use on both macOS and Windows machines. If you would like to follow along, first take a look at the getting started guide for your operating system:
Linux users can follow the getting started with Linux guide and continue reading here for more information about the POT2001.
First Look
After plugging in the POT2001 into the HUB0001, and the HUB0001 into your computer, open the Phidget Control Panel. You will see something like this:
The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:
- Serial number: allows you to differentiate between similar Phidgets.
- Channel: allows you to differentiate between similar objects on a Phidget.
- Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.
The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.
Voltage Ratio Input
Double-click on a the Voltage Ratio Input object that corresponds to the hub port you plugged the slider into. This will run the example:
General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:
- Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
- Move the slider back and forth to see the Voltage ratio change from 0.0 V/V to 1.0 V/V.
Technical Details
Phidget Cable
The Phidget Cable is a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labelled. The connectors are commonly available - refer to the Analog Input Primer for manufacturer part numbers.
What to do Next
- Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
- Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.
