Language - Visual Basic

We provide support for the Visual Basic .NET language on the Windows operating system. We also provide instructions on how to get your project started in a number of common development environments. Select your operating system and preferred development environment below, and follow the instructions to get your project running with Phidgets.

If you do not know which development environment you want to use, or your development environment of choice is not listed, we recommend starting with Mono as the simplest path to getting your code running. Visual Studio is the most popular way to build Visual Basic .NET projects, but it also has a steep learning curve.

Once you have set up your development environment to run with Phidgets, we recommend you follow our guide on Phidget Programming Basics. The guide will showcase the fundamentals of programming with Phidgets.

Setup Guide

VB.NET - Select Development Environment

Select your Development Environment:

Windows

Language - VB

Windows with Visual Studio

Welcome to using Phidgets with Visual Basic! By using Visual Basic, you will have access to the complete Phidget22 API, including events.

Visual Studio is an IDE provided by Microsoft that can be used to develop code in a wide variety of programming languages, including Visual Basic.

Requirements

First, make sure you have the following installed:

● Phidgets Drivers for Windows

● Microsoft Visual Studio

Nuget

The Phidget22.NET library is now available on nuget.org here. Nuget is the recommended way to install and use the .NET library in Visual Studio. The nuget package bundles the C library on Windows, so there are no other prerequisites that need to be installed. The nuget package adds targets for .NET Core and .NET Standard, so it should be usable from almost any .NET environment which also supports the C library.

Use Our Examples

One of the best ways to start programming with Phidgets is to use our example code as a guide.

● VB Code Samples

Download the example(s) that correspond to your Phidget's channel classes. You can find them listed on the enclosure in most cases, or on the API tab of the product page.

Use Our Examples

Unpack and open the example project and click the Start button:

The application will open the Phidget, list basic information about the Phidget, and demonstrate the Phidget's functionality. Here is an example of a Digital Output channel on a RFID Phidget:

You should now have the example up and running for your device. This would be a good time to play around with the device and experiment with some of its functionality.

Editing the Examples

The Visual Basic .Net examples are derived from the Windows Phidget Control Panel, so you'll need to modify a few things to adapt them for your own purposes. To begin with, you can remove the following line:

commandLineData phidgetParameters = open.parseCmdLine(); //get command line parameters

Then, you can modify any line that mentions phidgetParameters by setting it to the desired value instead of using PhidgetParameters object...

Editing the Examples

For instance:

Try 'set all the values grabbed from command line.  these values have defaults that are set in ExampleUtils.vb, you can check there to see them
    device.Channel = phidgetParameters.Channel 'selects the channel on the device to open
    device.DeviceSerialNumber = phidgetParameters.SerialNumber 'selects the device or hub to open
    device.HubPort = phidgetParameters.HubPort 'selects th eport on the hub to open
    device.IsHubPortDevice = phidgetParameters.isHubPortDevice 'is the device a port on a vint hub?

    If phidgetParameters.isRemote Then 'are we trying to open a remote device?
        device.IsRemote = True
        Net.EnableServerDiscovery(ServerType.Device) 'turn on network scan
        If phidgetParameters.Password <> vbNullString And 
           phidgetParameters.ServerName <> vbNullString Then
           
            Net.SetServerPassword(phidgetParameters.ServerName, phidgetParameters.Password)
        End If
    Else
        device.IsLocal = True
    End If

    device.Open() 'open the device specified by the above parameters
Catch ex As PhidgetException
    errorBox.addMessage("Error opening the device: " + ex.Message)
End Try

Might become:

Try
    device.Channel = 0
    device.DeviceSerialNumber = 370097
    device.HubPort = 0
    device.IsHubPortDevice = True
    device.IsLocal = True

    device.Open()
Catch ex As PhidgetException
    errorBox.addMessage("Error opening the device: " + ex.Message)
End Try

You can then manipulate the rest of the code as your application requires.

Write Code

You now have working examples and a project that is configured. This teaching section will help you understand how the examples were written so you can start writing your own code.

Remember: your main reference for writing VB code will be:

● The Phidget22 API documentation

● The VB Example Code

Write Code

Step One: Create And Address

You will need to declare your Phidget object in your code. For example, we can declare a digital input object like this:

ch = New Phidget22.DigitalInput()

Next, we can address which Phidget we want to connect to by setting parameters such as DeviceSerialNumber.

ch.DeviceSerialNumber = 496911

You can find information about all available parameters here or in the API documentation.

Write Code

Step One: Create And Address

Although we will not discuss it in-depth on this page, you should include error handling for all Phidget functions. Here is an example of the previous code with error handling:

Try
  ch = New Phidget22.DigitalInput()
  ch.DeviceSerialNumber = 496911
Catch ex As PhidgetException
  errorBox.addMessage("Error initializing: " + ex.Message)
End Try

Write Code

Step Two: Open And Wait For Attachment

After we have specified which Phidget to connect to, we can open the Phidget object like this:

ch.Open(5000)

To use a Phidget, it must be plugged in (attached). We can handle this by calling Open(timeout), which will block indefinitely until a connection is made, or until the timeout value is exceeded. Simply calling Open does not guarantee you can use the Phidget immediately.

Write Code

Alternately, you could verify the device is attached by using event driven programming and tracking the attach events.

To use events to handle attachments, we have to modify our code slightly:

Private Sub device_Attach(ByVal sender As Object, ByVal e As Phidget22.Events.AttachEventArgs) Handles ch.Attach
  Console.WriteLine("Phidget Attached!");
End Sub

We recommend using this attach handler to set any initialization parameters for the channel such as DataInterval and ChangeTrigger from within the AttachHandler, so the parameters are set as soon as the device becomes available.

Write Code

Step Three: Do Things With The Phidget

We recommend the use of event driven programming when working with Phidgets. In a similar way to handling an attach event as described above, we can also add an event handler for a state change event:

Private Sub device_DigitalInputChange(ByVal sender As Object, ByVal e As Phidget22.Events.DigitalInputStateChangeEventArgs) Handles ch.StateChange
  stateText.Text = "State: " + e.State;
End Sub

If you are using multiple Phidgets in your program, check out our page on Using Multiple Phidgets for information on how to properly address them and use them in events.

If events do not suit your needs, you can also poll the device directly for data using code like this:

state= device.State;
stateText.Text = "State: " + e.State;

Important Note: There will be a period of time between the attachment of a Phidget sensor and the availability of the first data from the device. Any attempts to get this data before it is ready will result in an exception. See more information on this on our page for Unknown Values.

Write Code

Step Three: Do Things With The Phidget

Enumerations: Some Phidget devices have functions that deal with specific predefined values called enumerations. Enumerations commonly provide readable names to a set of numbered options.

Enumerations with Phidgets in Visual Basic will take the form of Phidget22.EnumerationType.Enumeration_Name.

For example, specifying a SensorType to use the 1142 for a voltage input would look like:

Phidget22.VoltageSensorType.PN_1142

and specifying a K-Type thermocouple for a temperature sensor would be:

Phidget22.ThermocoupleType.K

The Phidget error code for timing out could be specified as:

Phidget22.ErrorCode.Timeout

Write Code

Step Four: Close And Delete

At the end of your program, be sure to close and delete your device:

device.Close();

Setting up a New Project

When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget .NET library. To begin:

Create a new Windows Forms Application project:

Setting up a New Project

Next, right-click to add a reference to the Phidget .NET library:

Setting up a New Project

On the following screen, click Browse and navigate to the location of Phidget22.NET.dll:

Setting up a New Project

Finally, to include the Phidget .NET library, add the following lines to main window class file:

Imports Phidget22
Imports Phidget22.Events

Success! The project now has access to Phidgets.

What's Next?

Now that you've set up Phidgets in your programming environment, you should read our guide on Phidget Programming Basics to learn the fundamentals of programming with Phidgets.

«

»

Language - VB.Net

Windows with Mono

Welcome to using Phidgets with Visual Basic! By using Visual Basic, you will have access to the complete Phidget22 API, including events.

Mono is an open-source programming environment that aims to make Microsoft .NET applications available across all operating systems.

Requirements

First, make sure you have the following installed:

● Phidgets Drivers for Windows

● Mono

Nuget

The Phidget22.NET library is now available on nuget.org here. Nuget is the recommended way to install and use the .NET library in Visual Studio. The nuget package bundles the C library on Windows, so there are no other prerequisites that need to be installed. The nuget package adds targets for .NET Core and .NET Standard, so it should be usable from almost any .NET environment which also supports the C library.

Use Our Examples

First, download and unpack the HelloWorld example for VB. This example uses the Phidget Manager to list all Phidget channels that can be accessed by your computer:

● HelloWorld example

Note: The HelloWorld example is compatible with Mono because it does not use Windows Forms. All other VB examples use Windows Forms.

Use Our Examples

Next, copy Phidget22.NET.dll from type the following location:

● C:\Program Files\Phidgets\Phidget22\Phidget22.NET.dll

Place both the HelloWorld example and the Phidget22.NET.dll file in the same location. Your folder should now look something like this:

Use Our Examples

Open the command prompt at the folder location and enter the following command:

vbnc /r:Phidget22.NET.dll Module1.vb

This will create an executable file called Module1.exe. Type in the following command to run the example:

mono Module1.exe

Use Our Examples

You should be able to see the channels of your Phidget listed when the program starts or whenever the Phidget is plugged in while the program is running.

Now that you've confirmed that your devices are properly connected, the next step is to download and edit sample code for your specific device.

Use Our Examples

To download the code samples, visit this page:

● VB Code Samples

Download the example(s) that correspond to your Phidget's channel classes. You can find them listed on the enclosure in most cases, or on the API tab of the product page.

Editing the Examples

The Visual Basic examples are derived from the Windows Phidget Control Panel, so you'll need to modify a few things to adapt them for your own purposes. To begin with, you can remove the following line:

commandLineData phidgetParameters = open.parseCmdLine(); //get command line parameters

Then, you can modify any line that mentions phidgetParameters by setting it to the desired value instead of using PhidgetParameters object...

Editing the Examples

For instance:

Try 'set all the values grabbed from command line.  these values have defaults that are set in ExampleUtils.vb, you can check there to see them
    device.Channel = phidgetParameters.Channel 'selects the channel on the device to open
    device.DeviceSerialNumber = phidgetParameters.SerialNumber 'selects the device or hub to open
    device.HubPort = phidgetParameters.HubPort 'selects th eport on the hub to open
    device.IsHubPortDevice = phidgetParameters.isHubPortDevice 'is the device a port on a vint hub?

    If phidgetParameters.isRemote Then 'are we trying to open a remote device?
        device.IsRemote = True
        Net.EnableServerDiscovery(ServerType.Device) 'turn on network scan
        If phidgetParameters.Password <> vbNullString And 
           phidgetParameters.ServerName <> vbNullString Then
           
            Net.SetServerPassword(phidgetParameters.ServerName, phidgetParameters.Password)
        End If
    Else
        device.IsLocal = True
    End If

    device.Open() 'open the device specified by the above parameters
Catch ex As PhidgetException
    errorBox.addMessage("Error opening the device: " + ex.Message)
End Try

Might become:

Try
    device.Channel = 0
    device.DeviceSerialNumber = 370097
    device.HubPort = 0
    device.IsHubPortDevice = True
    device.IsLocal = True

    device.Open()
Catch ex As PhidgetException
    errorBox.addMessage("Error opening the device: " + ex.Message)
End Try

You can then manipulate the rest of the code as your application requires.

Write Code

You now have working examples and a project that is configured. This teaching section will help you understand how the examples were written so you can start writing your own code.

Remember: your main reference for writing VB code will be:

● The Phidget22 API documentation

● The VB Example Code

Write Code

Step One: Create And Address

You will need to declare your Phidget object in your code. For example, we can declare a digital input object like this:

ch = New Phidget22.DigitalInput()

Next, we can address which Phidget we want to connect to by setting parameters such as DeviceSerialNumber.

ch.DeviceSerialNumber = 496911

You can find information about all available parameters here or in the API documentation.

Write Code

Step One: Create And Address

Although we will not discuss it in-depth on this page, you should include error handling for all Phidget functions. Here is an example of the previous code with error handling:

Try
  ch = New Phidget22.DigitalInput()
  ch.DeviceSerialNumber = 496911
Catch ex As PhidgetException
  errorBox.addMessage("Error initializing: " + ex.Message)
End Try

Write Code

Step Two: Open And Wait For Attachment

After we have specified which Phidget to connect to, we can open the Phidget object like this:

ch.Open(5000)

To use a Phidget, it must be plugged in (attached). We can handle this by calling Open(timeout), which will block indefinitely until a connection is made, or until the timeout value is exceeded. Simply calling Open does not guarantee you can use the Phidget immediately.

Write Code

Alternately, you could verify the device is attached by using event driven programming and tracking the attach events.

To use events to handle attachments, we have to modify our code slightly:

Private Sub device_Attach(ByVal sender As Object, ByVal e As Phidget22.Events.AttachEventArgs) Handles ch.Attach
  Console.WriteLine("Phidget Attached!");
End Sub

We recommend using this attach handler to set any initialization parameters for the channel such as DataInterval and ChangeTrigger from within the AttachHandler, so the parameters are set as soon as the device becomes available.

Write Code

Step Three: Do Things With The Phidget

We recommend the use of event driven programming when working with Phidgets. In a similar way to handling an attach event as described above, we can also add an event handler for a state change event:

Private Sub device_DigitalInputChange(ByVal sender As Object, ByVal e As Phidget22.Events.DigitalInputStateChangeEventArgs) Handles ch.StateChange
  stateText.Text = "State: " + e.State;
End Sub

If you are using multiple Phidgets in your program, check out our page on Using Multiple Phidgets for information on how to properly address them and use them in events.

If events do not suit your needs, you can also poll the device directly for data using code like this:

state= device.State;
stateText.Text = "State: " + e.State;

Important Note: There will be a period of time between the attachment of a Phidget sensor and the availability of the first data from the device. Any attempts to get this data before it is ready will result in an exception. See more information on this on our page for Unknown Values.

Write Code

Step Three: Do Things With The Phidget

Enumerations: Some Phidget devices have functions that deal with specific predefined values called enumerations. Enumerations commonly provide readable names to a set of numbered options.

Enumerations with Phidgets in Visual Basic will take the form of Phidget22.EnumerationType.Enumeration_Name.

For example, specifying a SensorType to use the 1142 for a voltage input would look like:

Phidget22.VoltageSensorType.PN_1142

and specifying a K-Type thermocouple for a temperature sensor would be:

Phidget22.ThermocoupleType.K

The Phidget error code for timing out could be specified as:

Phidget22.ErrorCode.Timeout

Write Code

Step Four: Close And Delete

At the end of your program, be sure to close and delete your device:

device.Close();

Setting up a New Project

When you are building a project from scratch, or adding Phidget functionality to an existing project, you'll need to configure your development environment to properly link the Phidget .NET library. To begin:

To include the Phidget .NET library, simply add the following lines to your code:

Imports Phidget22
Imports Phidget22.Events

Setting up a New Project

Next, copy Phidget22.NET.dll from the following location:

● C:\Program Files\Phidgets\Phidget22\Phidget22.NET.dll

Place your program and the Phidget22.NET.dll file in the same location. Your folder should now look something like this:

Setting up a New Project

Open the command prompt at the folder location and enter the following command:

vbnc /r:Phidget22.NET.dll Module1.vb

This will create an executable file called Module1.exe. Type in the following command to run the example:

mono Module1.exe

Success! The project now has access to Phidgets.

What's Next?

Now that you've set up Phidgets in your programming environment, you should read our guide on Phidget Programming Basics to learn the fundamentals of programming with Phidgets.

«

»

Quick Downloads

If you already know what you're doing and just need the files, you can find them all below.

Documentation

• Phidget22 API (Select Visual Basic .NET from drop-down menu)

Example Code

• Visual Basic .NET Examples

Libraries

• Windows Drivers Installer (32-Bit)
• Windows Drivers Installer (64-Bit)
• Windows Development Libraries
• macOS Installer
• Linux Libraries
• Linux Phidget Network Server