1145 User Guide: Difference between revisions

From Phidgets Support
(Created page with "Category:UserGuide {{UserguideTOC|1145.jpg|1145}} ==Getting Started== ===Checking the Contents=== {{UGbox| '''You should have received:''' * A ±12V Sensor Adapter * A se...")
 
No edit summary
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
__NOINDEX__
<metadesc>Phidgets mostly run on 5v, but if you have a ±12V sensor you can use the +/- 12V Sensor Adapter.</metadesc>
[[Category:UserGuide]]
[[Category:UserGuide]]
{{UserguideTOC|1145.jpg|1145}}
==Getting Started==
==Getting Started==
{{UgSensorIntro|1145| 5V to ±12V Sensor Adapter|Voltage Input port}}
*12 Volt sensor


===Checking the Contents===
{{UGbox|
'''You should have received:'''
* A ±12V Sensor Adapter
* A sensor cable
* Two 10kΩ resistors
|
'''In order to test your new Phidget you will also need:'''
* A PhidgetInterfaceKit 8/8/8 or a PhidgetTextLCD
* A USB cable
* A ±12V Sensor
||}}


===Connecting the Pieces===
Next, you will need to connect the pieces:
{{UGbox|
[[Image:1145_0_Connecting_The_Hardware.jpg|400px|right|link=]]
#Connect the ±12V Sensor Adapter to a ±12V Sensor.
# Connect the ±12V sensor to the 1145.
#Connect the ±12V Sensor Adapter to an Analog Input on the PhidgetInterfaceKit 8/8/8 using the sensor cable.
# Connect the 1145 to the HUB0000 with the Phidget cable.
#Connect the PhidgetInterfaceKit to your PC using the USB cable.
# Connect the HUB0000 to your computer with the USB cable.
|
[[File:1145_0_Connecting_The_Hardware.jpg|400px|link=]]
||}}


===Testing Using Windows 2000 / XP / Vista / 7===
<br clear="all">
{{UGIntroDone|1145}}


{{UGwin}}
==Using the 1145==
{{UGcontrolpanelSensor|1145|HUB0000}}


===Running Phidgets Sample Program===
===Voltage Input===
 
Double-click on a Voltage Input object in order to run the example:
{{UGwin2|'''InterfaceKit-full'''}}
[[File:1010_1018_1019_VoltageInputSensor_Example.jpg|link=|center]]
 
{{UGExampleDescription}}
{{UGbox6|
*Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page.
Double Click on the [[File:Ph.jpg|link=]] icon to activate the Phidget Control Panel and make sure that the '''Phidget InterfaceKit 8/8/8''' is properly attached  to your PC. 
*To find out how to convert your ''Voltage'' value into a useful quantity, check out the [[#Formulas|formulas]] section below.
|[[File:1018_2_Control_Panel_Screen.jpg|400px|link=]]
|
#Double Click on '''Phidget InterfaceKit 8/8/8''' in the Phidget Control Panel to bring up InterfaceKit-full and check that the box labelled Attached contains the word True.
#Make sure that the Ratiometric box is NOT Ticked.
#Test your sensor by introducing stimulus (eg. put a warm object on a temperature sensor) and you should see the value change in the box that corresponds to the analog input that the ±12V sensor adapter is plugged into.
#You can adjust the input sensitivity by moving the slider pointer.
#Click on the Sensors button to bring up the Advanced Sensor Form.
|
[[File:Sensor InterfaceKit Screen 324NR.jpg|400px|link=]]
|
#In the Sensor box of the input you plugged the sensor into, select the sensor you're using from the drop down menu.
#In this example we're using a current transducer. The current being measured is displayed in the box.
#Formula used to convert the analog input SensorValue into mA.
|
[[File:1145 0 Advanced Sensor Form Screen.jpg|link=|400px]]
}}
 
===Testing Using Mac OS X===
 
{{UGmac| | }}
 
===Using Linux===
 
{{UGlinux}}
 
===Using Windows Mobile / CE 5.0 / CE 6.0===
 
{{UGce}}


==Technical Details==
==Technical Details==
 
===General===
 
[[File:1145_pinout.jpg|link=|250px|right]]
 
The 1145 uses a four-pin side mounted XH connector as its input.
<br clear="all">
===Formulas===
===Formulas===
The formula to translate SensorValue into return voltage of the ±12V sensor is:
:<math>
\text{Sensor Voltage (V DC)} = SensorValue / 200
</math>
In order to convert from the return voltage of the 1145 into the actual reported value of your sensor, check you specific sensor's data sheet or user guide for the formula.
In order to convert from the return voltage of the 1145 into the actual reported value of your sensor, check you specific sensor's data sheet or user guide for the formula.
{{UGotherint}}


{{UGasens}}
{{UGasens}}


==Product History==
{{UGnext|}}
{{UGhist}}
{{UGrow|July 2013|0 |N/A |Product Release }}

Latest revision as of 20:38, 8 May 2018


Getting Started

Welcome to the 1145 user guide! In order to get started, make sure you have the following hardware on hand:


Next, you will need to connect the pieces:

1145 0 Connecting The Hardware.jpg
  1. Connect the ±12V sensor to the 1145.
  2. Connect the 1145 to the HUB0000 with the Phidget cable.
  3. Connect the HUB0000 to your computer with the USB cable.


Now that you have everything together, let's start using the 1145!

Using the 1145

Phidget Control Panel

In order to demonstrate the functionality of the 1145, we will connect it to the HUB0000, and then run an example using the Phidget Control Panel on a Windows machine.


The Phidget Control Panel is available for use on both macOS and Windows machines. If you would like to follow along, first take a look at the getting started guide for your operating system:


Linux users can follow the getting started with Linux guide and continue reading here for more information about the 1145.

First Look

After plugging in the 1145 into the HUB0000, and the HUB0000 into your computer, open the Phidget Control Panel. You will see something like this:

HUB0000 Panel.jpg


The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

  • Serial number: allows you to differentiate between similar Phidgets.
  • Channel: allows you to differentiate between similar objects on a Phidget.
  • Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.


The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

Voltage Input

Double-click on a Voltage Input object in order to run the example:

1010 1018 1019 VoltageInputSensor Example.jpg

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
  • To find out how to convert your Voltage value into a useful quantity, check out the formulas section below.

Technical Details

General

1145 pinout.jpg

The 1145 uses a four-pin side mounted XH connector as its input.

Formulas

In order to convert from the return voltage of the 1145 into the actual reported value of your sensor, check you specific sensor's data sheet or user guide for the formula.

Phidget Cable

Analoginput.jpg

The Phidget Cable is a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labelled. The connectors are commonly available - refer to the Analog Input Primer for manufacturer part numbers.

What to do Next

  • Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
  • Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.


Retrieved from "https://www.phidgets.com/docs/index.php?title=1145_User_Guide&oldid=29266"