Template:UgTemperatureSensorIC: Difference between revisions

Latest revision as of 23:14, 20 June 2017

Double-click on the Temperature Sensor object {{{2}}} in order to run the example: [[Image:{{{1}}}_TemperatureSensorIC_Example.jpg|center|link=]]

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
The measured temperature can be seen next to the Temperature label. Cover the board with your hands to see the temperature quickly rise.

@@ Line 1: / Line 1: @@
-===TemperatureSensor (IC)===
+===Temperature Sensor {{{3}}}===
+Double-click on the Temperature Sensor object {{{2}}} in order to run the example:
+[[Image:{{{1}}}_TemperatureSensorIC_Example.jpg|center|link=]]
-[[Image:TemperatureSensorIC_Example.jpg|right|link=]]
-When you double click on a TemperatureSensor object, a window like the one pictured will open.
+{{UGExampleDescription}}
+*Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page.
-* At the top of the window, information about your device and the properties of this particular channel will be listed.
+*The measured temperature can be seen next to the ''Temperature'' label. Cover the board with your hands to see the temperature quickly rise.
-* On the left, change trigger and data interval can be changed. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|Data Rate/Change Trigger]] page.
-* On the right, the current temperature in degrees Celsius is continually updated. You can cover the board with your hands to see the temperature slowly increase.
 <br clear="all">