OS - Linux: Difference between revisions

From Phidgets Support
 
(81 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<metadesc>Communicate over USB with sensors, controllers and relays with Phidgets! Program in Linux using a wide variety of programming languages.</metadesc>
[[Category:OS]]
[[Category:OS]]
{{OSLang|[[File:icon-Linux.png|64x64px|left|link=OS - Linux]]|On Linux, Phidgets can be either plugged directly into a USB Port or run over a network using the [[#WebService | Network Service]].}}
{|
__TOC__
|style="vertical-align:middle; width: 60%;"|
<span style="color:#FF0000">You need kernel '''version 2.6''' (released in 2003) or later.</span>
 
==Quick Downloads==
 
Linux has complete support for all Phidgets and their software APIs; the only thing it lacks when compared to Windows and OS X is a graphical user interface.  We walk you through all steps for download,  installation, checking, and starting to write code below. 
 
If you are already a pro, and just want the downloads:
*[{{SERVER}}/downloads/libraries/libphidget.tar.gz Phidget Libraries for Linux]
*[{{SERVER}}/downloads/libraries/phidgetwebservice.tar.gz Phidget Network Service for Linux]
*[[Software License]]
 
==Getting Started with Linux==
==Getting Started with Linux==
Welcome to using Phidgets with Linux!


===Installing===
If you are ready to go, the first step in creating Linux applications with Phidgets is installing our libraries.
|{{TOC limit|3}}
|}
===Install===
The first step to using Phidgets with Linux is installing the Phidget22 libraries.
{{LinuxSupport}}
If you're running one of the supported distros, we recommend using the '''Package Install'''. For other systems, you can use the '''Source Install'''.


To install the libraries, follow these steps:
<div class="bigTabs">
<tabber>
Package Install=
====Install Script====
To run the install script and install phidget22, enter the following command in the terminal:


#Install libusb-1.0 development libraries - {{Code|libusb-1.0-0-dev}}. 
{{LinuxInstallScript}}
#*Note that libusb-1.0 may be already on your system, but the development libraries probably aren't.
#*Search for {{Code|libusb-1.0-0-dev}} or similar in your distribution package directory via {{Code|sudo apt-get install libusb-1.0-0-dev}}
#*Or install [http://www.libusb.org/ from source].
#Unpack and install the [{{SERVER}}/downloads/libraries/libphidget.tar.gz Phidget Libraries]
#*From the main unpacked libraries directory, run:
#*:{{Code|./configure}}
#*:{{Code|make}}
#*:{{Code|sudo make install}}
#*This will compile phidget22.h and place the library into your gcc path


'''Note:''' Although these libraries are written in C, the additional libraries for Python, Java, and most other Phidget-supported languages depend on them so they must be installed no matter what else you want to do. 
====Manual Install====
To install our package repository manually, enter the following command in the terminal, replacing ''distro'' with your distro codename:


===Checking===
{{LinuxGetKey}}


To confirm the libraries were installed and work correctly, you can check both the hardware and software sides of the interface.  It is worth checking the software side first, because if it works then you know the hardware side is also okay.
We support Debian releases from 6 to current, and Ubuntu LTS releases from 14.04 to current. If you are using another flavour of Linux (such as Mint), which is based on Ubuntu or Debian, use the corresponding Ubuntu or Debian codename.


====Software====
Update your package lists:
{{LinuxAptUpdate}}


To confirm that the libraries were installed correctly and can be used in code, you can use the [{{SERVER}}/downloads/examples/phidget21-c-examples.tar.gz C examples].
Finally, install the Phidget package by entering the command below:
{{LinuxAptInstall}}


The easiest way to confirm correct installation will be to compile and run the {{Code|HelloWorld}} C example, included in the examples download.  This does not involve writing any C code, but it does involve compiling the example and running it, which is a quick process as we show below. If you feel more comfortable running the {{Code|HelloWorld}} example for your specific language, you can skip below and pick your language, but keep in mind that any problems could be with the C library installation and not necessarily with your language.
====Additional Packages====
You may also want to apt-get install the following optional packages:
* '''libphidget22-dev''': The C development libraries for Phidget22
* '''libphidget22extra''': Extra runtime library required for the Network Server and Admin tools
* '''phidget22networkserver''': The [[Phidget Network Server]], which enables use of Phidgets over your network
* '''libphidget22java''': The Java libraries for Phidget22
* [[Phidget22admin Guide|'''phidget22admin''']]: An administrator utility for listing Phidgets and upgrading firmware
* '''phidget22wwwjs''': The JavaScript libraries for Phidget22. This package also installs the HTML examples which can be accessed through the web interface


To compile and run the basic C example for checking your installation:


1. Unpack the Phidget Generic C Examples<br>
The libraries are now installed on your machine. Next, set up the UDev rules below.
2. Open a terminal (often Ctrl-Alt-T) and go to the directory where the examples are unpacked<br>
3. Compile the {{Code|HelloWorld.c}} example:<br>
<div class="source">
<syntaxhighlight lang=bash>


gcc HelloWorld.c -o HelloWorld -lphidget22
|-|
 
Source Install=
</syntaxhighlight>
====Source Install====
</div>
To install our libraries, first install libusb-1.0 development libraries. The exact command and package name will vary depending on distribution. For Debian based distributions, including Ubuntu and Mint, the command would be:
4. Run the {{Code|HelloWorld}} example:<br>
<div class="source">
<syntaxhighlight lang=bash>
<syntaxhighlight lang=bash>
 
apt-get install libusb-1.0-0-dev
sudo ./HelloWorld
 
</syntaxhighlight>
</syntaxhighlight>
</div>
(The sudo is needed for USB access for now, see the [[#Setting udev Rules|Setting udev Rules]] section for how to change this)


The {{Code|-lphidget22}} will look in the standard library location for your Linux distribution (usually {{Code|/usr/lib/}}) for the Phidget 22 library file.  Generally, libraries to be linked on Linux through {{Code|gcc}} have a naming convention.  For example, {{Code|-lphidget22}} looks for the binary files '''{{Code|libphidget22.a}}''' and '''{{Code|libphidget22.so}}''' in the library location.  These files are automatically put in the library location during the {{Code|make install}} step of [[#Installing | installing the libraries]].


The HelloWorld program will simply print out basic information for any device you plug in, and print a message upon unplugging the device. For example, starting the program, plugging in an Interface Kit Phidget, unplugging the Interface Kit, and pressing Enter displays:
Next, download and unpack the following files:
*[https://cdn.phidgets.com/downloads/phidget22/libraries/linux/libphidget22.tar.gz libphidget22] (Mandatory)
*[https://cdn.phidgets.com/downloads/phidget22/libraries/linux/libphidget22extra.tar.gz libphidget22extra] (Optional - needed by NetworkServer and Admin)
*[https://cdn.phidgets.com/downloads/phidget22/libraries/linux/libphidget22java.tar.gz libphidget22java] (Optional - Java Libraries)
*[https://cdn.phidgets.com/downloads/phidget22/servers/linux/phidget22networkserver.tar.gz phidget22networkserver] (Optional - [[Phidget Network Server]])
*[https://cdn.phidgets.com/downloads/phidget22/tools/linux/phidget22admin.tar.gz phidget22admin] (Optional - Phidget Admin Tool)
Open the README file that is included at the top of each directory. This file will give you important information about how to properly install the files.


<div class="source">
<syntaxhighlight lang=bash>


$ sudo ./HelloWorld
Libraries are installed in /usr/local/lib by default. If you run into trouble finding the libraries during linking or at runtime, this probably means that /usr/local/lib is not on the library path for your distribution.
 
Opening...
Press Enter to end


Hello to Device Phidget InterfaceKit 8/8/8, Serial Number: 37299
You can handle this in a number of ways:
Goodbye Device Phidget InterfaceKit 8/8/8, Serial Number: 37299


Closing...
Specify a different install folder during compile
<syntaxhighlight lang=bash>./configure --prefix=/usr && make && sudo make install</syntaxhighlight>
OR Add /usr/local/lib to the system-wide library path
<syntaxhighlight lang=bash>echo /usr/local/lib >> /etc/ld.so.conf && sudo ldconfig</syntaxhighlight>
OR Add /usr/local/lib in your local shell every time
<syntaxhighlight lang=bash>export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib</syntaxhighlight>


</syntaxhighlight>
The libraries are now installed on your machine. Next, you should set the UDev Rules.
</tabber>
</div>
</div>


====Hardware====
=== Setting UDev Rules ===
By default, Linux will not grant permission to regular users to access physical hardware as a security feature.  This means that in order to run Phidgets code from user space you must grant yourself root privileges via sudo.  For example:


If the out-of-the-box examples do not work, make sure the Phidget is seen by your USB interface. To check this, you can use the kernel log reader {{Code|dmesg}}.  Pipe the output of {{Code|dmesg}} into the utility {{Code|tail}} to read the last ten lines of the log:
sudo ./HelloWorld


<div class="source">
You can grant access manually or, more commonly, set up a rules file to do it automatically keying off of the vendor code for Phidget USB devices.  To do this, create a text file called "99-libphidget22.rules" with the following contents:
<syntaxhighlight lang=bash>


$> dmesg | tail
# All current and future Phidgets - Vendor = 0x06c2, Product = 0x0030 - 0x00af
....(3 lines)....
SUBSYSTEMS=="usb", ACTION=="add", ATTRS{idVendor}=="06c2", ATTRS{idProduct}=="00[3-a][0-f]", MODE="666"
[337.189132] usb 1-2: new full-speed USB device number 5 using ochi-pci
[337.464709] usb 1-2: New USB device found, idVendor=06c2 idProduct=0034
[337.464714] usb 1-2: New USB device strongs: Mfr=1, Product=2, SerialNumber=3
[337.464718] usb 1-2: Product: 1024_0
[337.464721] usb 1-2: Manufacturer: Phidgets Inc.
[337.464724] usb 1-2: SerialNumber: 388624
[337.491426] usb 1-2: hid-generic 0003:06C2:0034.0004: hiddev0,hidraw1: USB HID v1.01 Device [Phidgets Inc. 1024_0] on usb-0000:00:06.0-2/input0


</syntaxhighlight>
Where mode 666 means every user has permission to read and write to the specified file/device.  You need to then move this file to "/etc/udev/rules.d".  Now you can run Phidget related code as a regular user without the OS denying permission. 
</div>


The number between the [ ] is the system time in seconds since the last boot up, so you can tell whether the event was recent or not.  (This will also tell you the interrupt type of Phidget that is registered by the USB interface, see the [[#Common Problems and Solutions | common problems section below]] for more information on what this means.)
===Verify===
The best way to verify that your libraries are working properly is to compile and run an example program.


The Phidget should both connect and disconnect properly, so unplugging it should result in an additional line at the tail:


<div class="source">
First, download and unpack this C example:
<syntaxhighlight lang=bash>
*[https://cdn.phidgets.com/downloads/phidget22/examples/c/Manager/Phidget22_HelloWorld_C_Ex.zip HelloWorld C example]


$> dmesg | tail
'''Note:''' If using the Debian intallation methods, you will need to install the '''libphidget22-dev''' package to use the C libraries for Phidget22
....(9 lines)....
[744.558055] usb 1-2: USB disconnect, device number 5


</syntaxhighlight>
Next, open the terminal at the example location. Compile the example by entering the following command:
</div>
 
If you don't see similar lines to these at the tail of your kernel log, take a look at the [[#Troubleshooting|troubleshooting]] section below, as well as the '''Communications''' section of our [[General Troubleshooting#Communications Troubleshooting|general troubleshooting page]].
 
====Troubleshooting====
 
If the examples '''do not''' work but USB '''does''' work (i.e. your computer can consistently see the device in the [[#Hardware|hardware]]), take a moment to check the basics:
* No other programs, drivers, or processes are using that USB port in software
* You are running the example program as root (or your udev rules have been set properly)
* You are using libusb 1.0 (not the older 0.1 release)
* You have compiled versions of libphidget22.a and libphidget22.so in your system library location (usually {{Code|/usr/lib}})
* The Phidget libraries are the latest version (visit the [[#Quick Downloads| quick downloads section]] to download them)
* Your Linux kernel version is 2.6 or later (type {{Code|uname -r}} in a terminal to get your kernel version)
* Check the [[#Common Problems and Solutions|common problems]] section below, some specific combinations can cause problems
 
If your problem doesn't seem to be fixed by these steps, make sure that the Phidget is seen '''consistently''' by USB (if it is erratic, try our [[General Troubleshooting|general troubleshooting guide]]).  If you are still having problems after using the troubleshooting guide, please {{ContactUs|ask us}}!
 
==Programming Languages==
 
Now that you have the basic libraries installed, you can pick your language and begin programming! 
 
If you are not using the [[#WebService | webservice]] (discussed below) to control a Phidget over a network, your next step will be to delve into the use of your specific language.  Each page has its own set of specific libraries, code examples, and setup instructions. 
 
On Linux, we recommend the following languages:
 
*[[Language - C/C++|C/C++]]
*[[Language - Java | Java]]
*[[Language - Python | Python]]
 
We also support these languages on Linux:
 
*[[Language - C Sharp | C#]]
*[[Language - VB.Net | VB.Net]]
*[[Language - Javascript | Javascript]]
 
==Phidget Network Service==
 
The Phidget Network Service allows you to remotely control a Phidget over a network.<br>This section helps you install, check, and use the WebService on Linux, but we also have an overview of the [[Phidget Network Service]] in general.
 
===Installing the Network Service===
 
To install the Network Service, you must first have the [[#Installing|Phidget libraries installed]].  Then, follow these steps:
 
#Download '''avahi''' and its development libraries (mdnsresponder/bonjour is also an option, see the [[#WebService with mDNSResponder|webservice with mDNSResponder]] section)
#*Try {{Code|apt-cache search avahi}} in a terminal to find current packages
#*Often, this is installed in a default system, you may already have it
#Unpack and install the [{{SERVER}}/downloads/libraries/phidgetnetworkserver.tar.gz Phidgets Network Service] source code tarball for Linux
#*From the unpacked Network Service source code directory, run:
#*:{{Code|./configure}}
#*:{{Code|make}}
#*:{{Code|sudo make install}}
#*This will compile the executable {{Code|phidget22networkserver}} and place it into {{Code|/usr/bin/phidget22networkserver}}
 
====Network Service with mDNSResponder====
 
To use '''mdnsresponder''' instead of avahi, change the configure script to be:
 
<div class="source">
<syntaxhighlight lang=bash>
<syntaxhighlight lang=bash>
  ./configure --enable-zeroconf=bonjour
  gcc HelloWorld.c -o HelloWorld -lphidget22
</syntaxhighlight>
</syntaxhighlight>
</div>


(To see all options, use {{Code|./configure --help}} like you would any configure script)


===Setting Up the Network Service===
Run the HelloWorld example:
 
To set up and use the Phidget Network Service, it helps to have [[#Setting udev Rules|set your udev rules]].  Otherwise, you must run it as root.
 
You can get command line help with {{Code|phidget22networkserver}} by using the {{Code|-h}} option:
 
<div class="source">
<syntaxhighlight lang=bash>
$ phidget22networkserver -h
</syntaxhighlight>
 
<syntaxhighlight lang=text>
usage: phidget22networkserver [-D][-E][-c <cfg>][-l <logfile>][-v][-w]
  -D          run as daemon
  -E          log to stderr
  -c <cfg>    configuration file
  -l <logfile> log to 'logfile'
  -v          enable verbose logging (may be specified more than once)
  -p          run phidget sever
  -w          run web server
</syntaxhighlight>
</div>
 
You will see this help regardless of whether the network service was correctly hooked in to avahi.  In fact, you will see it even if you explicitly disabled mDNS in the {{Code|./configure}} step at compile:
 
<div class="source">
<syntaxhighlight lang=bash>
  ./configure --disable-zeroconf
</syntaxhighlight>
</div>
 
===Using the WebService===
 
To use a Phidget over the webservice, you'll want to:
* Obtain code you can use to open a Phidget remotely
* Start the webservice on the computer that directly connects to the Phidget
* Run your program on the remote computer that will control the Phidget over the network
 
The easiest way to test these steps on Linux is simply to set up the webservice and run the Phidget program on the same computer, using the loopback interface.  Later, you can replace one of the two ends with a different computer and/or operating system.
 
To quickly create code to run remotely, in our examples we include commented out lines with openRemote() function calls of different types.  In the C example for your device, find the line that says:
 
{{Code|CPhidget_open((CPhidgetHandle) device, -1)}}
 
and change it to be:
 
<div class="source">
<syntaxhighlight lang=bash>
int serial_number = 37299
CPhidget_openRemoteIP ((CPhidgetHandle) device, serial_number, "127.0.0.1", 5001, NULL)
</syntaxhighlight>
</div>
 
Except that you should replace '''37299''' with the serial number of your Phidget, which you can obtain from either the Phidget board itself, or from when you [[#Checking|ran the HelloWorld example code]].  The IP address "127.0.0.1" simply loops back to the same computer, and 5001 is the default port as found from using {{Code|phidget21webservice -h}} in [[#Setting Up the WebService|the Setting Up the WebService]] section.  The NULL is used to not specify a password.
 
Save the changed example under a different filename.  In the walkthrough here, we are using the {{Code|InterfaceKit.c}} example, and we rename it to be {{Code|InterfaceKitRemote.c}}
 
Compile your new C file. In our {{Code|InterfaceKitRemote.c}} case, this would be by:
 
<div class="source">
<syntaxhighlight lang=bash>
<syntaxhighlight lang=bash>
gcc InterfaceKitRemote.c -o InterfaceKitRemote -lphidget21
./HelloWorld
</syntaxhighlight>
</syntaxhighlight>
</div>
1. Start two terminals to run this test, usually opened via Ctrl-Alt-T.  Your [[#Setting udev Rules|udev rules]] need to be set up or you should use sudo for every command.  First, start the webservice in Terminal #1:
[[Image:Linux_ws_start.png|link=]]
This will broadcast any Phidget events, and receive any Phidget requests, both over the network.
2. Start the InterfaceKitRemote program that you just compiled which will open the remote Phidget.  In this case, it is {{Code|InterfaceKitRemote}}:
[[Image:Linux_ws_step2.png|link=]]
3. Now, plug in the Phidget!  The {{Code|phidget21webservice}} program captures the attach and other events and sends them out over the network (in the background in Terminal #1) and the Phidget software objected opened with openRemote in Terminal #2 receives them:
[[Image:Linux_ws_step3.png|link=]]
4. You can confirm that the webservice was indeed behind this exchange by killing the webservice process while still allowing the remote program to run:
[[Image:Linux_ws_step4.png|link=]]
===Debugging the Network Service===
In addition to enabling [[General Phidget Programming#Logging|logging]] in your Phidget code, you can get additional debugging information from the Network Service itself.  This additional debugging is enabled via a re-compile of the webservice.  From the webservice source code directory, do:
<div class="source">
<syntaxhighlight lang=bash>
make clean
./configure --enable-debug
make
sudo make install
</syntaxhighlight>
</div>
If you suspect multicast DNS (mDNS) may be the problem, you can:
* Try compiling the network service with mDNSResponder, as described in [[#Installing the Network Service|Installing the Network Service]], or
* Try compiling the network service completely without mDNS, as described in [[#Setting Up the Network Service|Setting Up the Network Service]]
==Advanced Uses==
===Setting udev Rules===
If you don't want to be using {{Code|sudo}} to run Phidget programs (including the Network Service) forever, you will want to create a {{Code|udev}} rule to allow yourself access to the Phidget when you are not root.
Udev has an easy way to set the owner and permissions of the USB interface of the Phidget - it finds all devices that match a given set of rules, and applies new traits to them.  But you need to give udev something to match in order to apply the new settings.  Here, we will tell udev to match the vendor code for Phidgets, Inc. 
We recommend that you use the rules file included in the library download you have already installed.  Check the README file included in that download for information on how exactly to install it, or continue reading here. 
The rules for udev are kept in files in {{Code|/etc/udev/rules.d/}} and are traditionally grouped into order of running (10 runs before 20, 30, etc) and device type (cd, network, etc).  There should be one or more files in there already. Simply find the file named {{Code|99-libphidget22.rules}} included with our library files, and move it into {{Code|/etc/udev/rules.d/}}.
Strictly speaking, the files run in lexical order (i.e. the order they're listed when you use {{Code|ls}}).  A device can match many rules, and all will apply (if possible).  If conflicting rules are found, the first rule found is followed.
===Starting the WebService at Boot===
If you are tired of starting the webservice on the command line all the time, you can have the webservice start when your system starts, every time.
====User Space====
If you are running a standard Linux machine with an X-server (Unity, KDE) the easiest way to do this is to have the Phidget WebService start when your x server starts.
In this case, the webservice will be running in user space, so your [[#Setting udev Rules|udev rules need to be set up]] for the your user permissions to be able to access the USB ports using libusb.
Within the X-windowing system, there is usually some sort of {{Code|System &rarr; Settings/Preferences &rarr; Startup}} that you can choose to add programs that start when a user session starts.  On Ubuntu you can use Unity to find programs listing "startup" in their names to accomplish the same thing.  This will eventually lead you to a window like this one:
[[Image:linux_ws_boot.png|400px|link=]]
Simply add the {{Code|/usr/bin/phidget22networkserver}} program to the list.
====As A Service====
You would want to set the boot start of {{Code|phidgetwebservice21}} to be a service if you are running a server, or a headless machine.  It is handy any time you need the webservice to be started as a booted, respawning service with a presence in different run levels and for all users.
A service is essentially a program that hangs out in the background, waiting to be used by some incoming task.  When the service is needed, the service forks a program to handle that need.  Most services that run on your Linux computer already have the ability to fork themselves. 
The webservice, however, is just a binary on Linux - {{Code|phidgetwebservice21}} - and so we need a program that handles the forking for us.  For this, we use the {{Code|start-stop-daemon}} program to spawn a standalone process for us, or kill it, based on our service-like start, stop, and restart commands.
To do this, we need:
# A script that tells the boot process how to start and handle the webservice (i.e. by using {{Code|start-stop-daemon}})
# A link from that script to the boot list
# An initialization file for the script
First, the script.  We will walk through Debian here, both because it is such a common distribution and because it is the distribution that our [{{SERVER}}products.php?product_id=1073 Single Board Computer] runs.  But {{Code|init}} is surprisingly diverse on Linux, including everything from a different boot order, to different initialization programs and structure, and even different runlevels. 
On Debian (including Ubuntu), the initialization script covers:
* Runlevels that the service should be present on
* Dependencies of the service
* Name of the service and other informative data
* The location of the PIDFILE, which stores the process ID (pid) for later dealing with a spawned instance
* Any configuration file locations
* What to do when the service is given instructions to '''start''', '''stop''', or '''reload'''.
The Debian script we use to start the webservice on the [{{SERVER}}products.php?product_id=1073 Single Board Computer]:
<div class="source">
<syntaxhighlight line start="1" lang=bash>
#!/bin/sh
### BEGIN INIT INFO
# Provides:          phidgetwebservice
# Required-Start:    $network $remote_fs
# Required-Stop:    $network $remote_fs
# Should-Start:      avahi
# Should-Stop:      avahi
# Default-Start:    2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Phidget WebService
# Description:      Phidget WebService for controlling Phidgets over the network.
### END INIT INFO
DESC="Phidget WebService"
NAME=phidgetwebservice
BIN=phidgetwebservice21
DAEMON=/usr/bin/$BIN
PIDFILE=/var/run/$NAME.pid
CFG=/etc/default/$NAME
# Gracefully exit if the package has been removed.
test -x $DAEMON || exit 0
# load config
pws_port="5001"
pws_serverid=""
pws_password=""
[ -f $CFG ] && . $CFG
start() {
[ -z "$pws_port" ] || OPTIONS="-p $pws_port "
[ -z "$pws_password" ] || OPTIONS="$OPTIONS-P $pws_password "
if [ -z "$pws_serverid" ]; then
OPTIONS="$OPTIONS -n $( hostname )"
else
OPTIONS="$OPTIONS -n $pws_serverid"
fi
echo -n "Starting $DESC: "
start-stop-daemon -S -b -q -p $PIDFILE -m -x $DAEMON -- $OPTIONS && echo "OK" || echo "ALREADY RUNNING"
}
stop() {
echo -n "Stopping $DESC: "
start-stop-daemon -K -q -p $PIDFILE -x $DAEMON && echo "OK" || echo "NOT RUNNING"
}
case "$1" in
  start)
start
;;
  stop)
stop
;;
  restart|force-reload)
stop
sleep 1
start
;;
  *)
echo "Usage: $0 {start|stop|restart}"
esac
exit 0
</syntaxhighlight>
</div>
Save the script into a file called {{Code|phidgetwebservice}}, and use {{Code|chmod 755}} to make it executable.
Also on Debian, startup service scripts should go in {{Code|/etc/init.d}}, and then put within the appropriate runlevel-numbered folder - by symbolic link.  There is a handy tool to do this for you, called {{Code|insserv}}:
<div class="source">
<syntaxhighlight lang=bash>
sudo insserv -d phidgetwebservice
</syntaxhighlight>
</div>
The {{Code|insserv}} program is the program that makes use of the {{Code|### BEGIN INIT INFO...### END INIT INFO}} that appears at the top of the {{Code|phidgetwebservice}} script.  Use {{Code|man insserv}} for more information.  The {{Code|insserv}} tool handles the mess of finding the right runlevel folders (i.e. the {{Code|rc.d}} numbered folders) and making the appropriate links. You can see what links would be updated by running {{Code|insserv}} with the {{Code|-n}} option, for a dry run.
'''Note:''' When you run {{Code|insserv}}, all of the dependencies for the boot order are re-written.  This means that all of the initialization scripts in {{Code|/etc/init.d}} are re-examined.  So, you'll probably get a lot of output when you run the command.
Then, you can check that {{Code|phidgetwebservice}} is on the service list with:
<div class="source">
<syntaxhighlight lang=bash>
service --status-all
</syntaxhighlight>
</div>
And you can start it right now without rebooting like this:
[[Image:linux_system_service_start.png|link=]]
The {{Code|service}} command has many options to start and stop services like the phidgetwebservice, try {{Code|man service}} for more information.
At this point, you can follow the client instructions on [[#Using the WebService|using the webservice]] to create a loopback test for the new webservice service that should now be running.
The final piece, for future configuration changes, is that the {{Code|/etc/init.d}} script looks for the file {{Code|/etc/default/phidgetwebservice}} upon starting up.  The file is expected to contain the port, server ID, and password for the server side of the webservice.  These are also set in the {{Code|phidgetwebservice}} script in {{Code|init.d}}, as you can see from reading the code above, but if you want to change them a lot, you can edit the configuration file rather than changing the {{Code|phidgetwebservice}} script and re-installing by {{Code|insserv}} every time.  The configuration file in {{Code|/etc/default/}} should contain the same syntax as that used in the script source above:
<div class="source">
<syntaxhighlight lang=bash>
pws_port="5001"
pws_serverid=""
pws_password=""
</syntaxhighlight>
</div>
===Cross-Compiling with a Custom Toolchain===
This would allow you to have the Phidget libraries compiled to include in code for an embedded device.  When developing for an embedded device, you will often write code for it on your 'normal' computer, and then build the code to binary with a different target than the processor in your computer.  Many microcontrollers do not have the ability to run a full operating system, and hence cannot compile code natively. 
The collection of tools used to create binary code for a separate system is called a ''toolchain''.  Compiling the Phidget libraries specifically for an embedded system, and placing them into the path for writing code on top of the libraries is like adding another link in this chain.
You can use the typical {{Code|./configure}} setup for custom build targets:
<div class="source">
<syntaxhighlight lang=bash>
./configure --prefix=toolchain_location --build=this_system --host=target_system
</syntaxhighlight>
</div>
For the Phidget libraries, the {{Code|./configure}} tool works this way as well. You'd use this in the [[#Installing|install the libraries section]] setup. For example, let's say you're building the libraries to develop code for the [{{SERVER}}products.php?product_id=1073 Single Board Computer] as a target.  Your system is a standard Linux system (i686-pc-linux-gnu) and the target system for the SBC is {{Code|arm-linux-gnueabi}}.  For this target, you'll need the base of the GNU embedded Debian chain:
<div class="source">
<syntaxhighlight lang=bash>
sudo apt-get install gcc-arm-linux-gnueabi
</syntaxhighlight>
</div>
Then, download the Phidget libraries [[#Quick Downloads|above]] and unpack them into a folder {{Code|phidget_libraries}}.  If {{Code|/usr/arm-linux-gnueabi}} is the location of your ARM toolchain (downloaded above in {{Code|gcc-arm-linux-gnueabi}}), type:
<div class="source">
<syntaxhighlight lang=bash>
~/phidget_libraries $> ./configure --prefix=/usr/arm-linux-gnueabi --build=i686-pc-linux-gnu --host=arm-linux-gnueabi
</syntaxhighlight>
</div>
===Linux on Non-Standard Systems===
We occasionally get requests to use Phidgets on Linux systems other than a standard laptop or desktop.  One example is the Raspberry Pi system.  Often these systems include USB ports, so the combination makes sense.


Our libraries are installed by building from source, and their main dependency is the {{Code|libusb-1.0-0-dev}} library, so if you can get gcc on your machine (or set up a cross compiler for it) and you can also install the libusb-1.0 development headers, you can probably get Phidgets to work.  Of course, we don't offer much support for these systems, so - depending on your system - expect to spend some raw time getting it up and going. 


If you're new to the embedded computer thing, keep in mind that for these super basic systems, once you've gotten a power supply, and storage, and put the kernel you want on it, and then spent a couple of days of time getting things working, and  more time getting your drivers going, costs add up pretty quickly.  If you want a compact system that works right out of the box (and which can use all of our analog sensors in addition to our USB Phidgets), check out our [{{SERVER}}products.php?product_id=1073 Single Board Computer].  Our SBC3:
Your terminal should look something like this:
* Has many more USB ports than super-stripped devices, and also has digital and analog ports
[[File:linux_helloworld.PNG|link=|center]]
* Includes a power supply and can run on batteries easily
* Has a nice amount of RAM, a decent embedded processor, and built-in onboard storage (we've run R, GRASS, and X11 on it)
* Includes installed Debian, working Phidget drivers, and [[Phidget WebService|networked Phidget drivers]] from the moment it ships
* Has access to the full Debian repository including Python, Mono .NET, Ruby, and gcc
* Has a kernel development kit with patch file and instructions for adding new drivers (bluetooth, wireless, and so on)
* Comes with very in-depth documentation and technical support by phone and email
* Etc, etc.
The [[Phidget WebService|networked support]] in particular allows it to work with your cell phone and more. 


But if you really do want a raw hobbyist system to tinker with, go for it!  We're all nerds here - we've been there too and we certainly understand!


==Common Problems and Solutions==
The HelloWorld program will simply communicate when a Phidget has been attached or detached, as can be seen in the image above.


{{ProblemSolution|Low Speed Phidgets (Max of 8)|Linux will only schedule one low-speed interrupt transfer per millisecond.}}


You can find out the type of your Phidget by attaching it and then running <code><font size=3>dmesg | tail</font></code>, which will display the type of Phidget from your kernel logs, as described above in the [[#Hardware|hardware section]]. The practical consequence of this is if your system has many low speed Phidgets attached, they will each be throttled down.  Low speed Phidgets require an interrupt transfer as often as every 8 milliseconds.  A Linux system could only have up to 8 of these Phidgets attached.
Your Phidget is now able to communicate with your development machine. The next step is selecting a programming language so you can start to write some code!


{{ProblemSolution|Sample Overrun Error|The data read from a program, or the first packet on the WebService, can give a sample overrun error (EEPHIDGET_OVERRUN).}}
==Programming==
Ready to write some code? Select one of the programming languages below:


Linux only polls data from the analog inputs on Phidgets when you ask it to.  So there is some delay between when you open the device and when it actually attaches when data from those inputs are accumulating...and overrunning the buffer.  This is simply in the nature of how Linux polls USB - we recommend catching (but ignoring) this one-time initial error.
{{Programming_Languages_Table}}


{{ProblemSolution|Raspberry Pi USB Current|Your device doesn't seem to run as expected on a Raspberry Pi.}}
==Older Versions==
If you need older versions of the Phidget22 Linux libraries, [{{SERVER}}/downloads/phidget22/libraries/linux/libphidget22/ click here].


The USB ports on the standard Raspberry Pi are only capable of supplying around 100mA reliably.  Since USB specification dictates 500mA of current maximum, many USB devices require several hundred mA to run smoothly.  Since the Pi cannot supply this much current it is common to see buggy performance or complete failure to run at all.  The get around this you should use a USB hub connected to the Pi that has it's own external power supply.  This will allow the devices connected to have as much power as they require.
If you need Phidget21 Linux Libraries, [{{SERVER}}/downloads/phidget21/libraries/linux/libphidget/ click here].

Latest revision as of 15:45, 9 September 2024

Getting Started with Linux

Welcome to using Phidgets with Linux!

If you are ready to go, the first step in creating Linux applications with Phidgets is installing our libraries.

Install

The first step to using Phidgets with Linux is installing the Phidget22 libraries.

Supported Distros / Archs
Debian 6 (Squeeze) i386 armel
Debian 7 (Wheezy)
Debian 8 (Jessie) armhf
Debian 9 (Stretch)
Debian 10 (Buster) amd64 arm64
Debian 11 (Bullseye)
Debian 12 (Bookworm)
Ubuntu Xenial 16.04 LTS i386 armhf
Ubuntu Bionic 18.04 LTS amd64 arm64
Ubuntu Focal 20.04 LTS
Ubuntu Jammy 22.04 LTS
Ubuntu Noble 24.04 LTS

If you're running one of the supported distros, we recommend using the Package Install. For other systems, you can use the Source Install.

Install Script

To run the install script and install phidget22, enter the following command in the terminal: 

curl -fsSL https://www.phidgets.com/downloads/setup_linux | bash -
apt-get install -y libphidget22


curl -fsSL https://www.phidgets.com/downloads/setup_linux | sudo -E bash -
sudo apt-get install -y libphidget22

Manual Install

To install our package repository manually, enter the following command in the terminal, replacing distro with your distro codename: 

wget -qO /usr/share/keyrings/phidgets.gpg \
  https://www.phidgets.com/gpgkey/pubring.gpg
echo deb [signed-by=/usr/share/keyrings/phidgets.gpg] \
  http://www.phidgets.com/debian distro main \
  > /etc/apt/sources.list.d/phidgets.list


sudo wget -qO /usr/share/keyrings/phidgets.gpg \
  https://www.phidgets.com/gpgkey/pubring.gpg
echo deb [signed-by=/usr/share/keyrings/phidgets.gpg] \
  http://www.phidgets.com/debian distro main | sudo tee \
  /etc/apt/sources.list.d/phidgets.list > /dev/null

We support Debian releases from 6 to current, and Ubuntu LTS releases from 14.04 to current. If you are using another flavour of Linux (such as Mint), which is based on Ubuntu or Debian, use the corresponding Ubuntu or Debian codename.

Update your package lists: 

apt-get update


sudo apt-get update

Finally, install the Phidget package by entering the command below: 

apt-get install libphidget22


sudo apt-get install libphidget22

Additional Packages

You may also want to apt-get install the following optional packages:

  • libphidget22-dev: The C development libraries for Phidget22
  • libphidget22extra: Extra runtime library required for the Network Server and Admin tools
  • phidget22networkserver: The Phidget Network Server, which enables use of Phidgets over your network
  • libphidget22java: The Java libraries for Phidget22
  • phidget22admin: An administrator utility for listing Phidgets and upgrading firmware
  • phidget22wwwjs: The JavaScript libraries for Phidget22. This package also installs the HTML examples which can be accessed through the web interface


The libraries are now installed on your machine. Next, set up the UDev rules below.

Source Install

To install our libraries, first install libusb-1.0 development libraries. The exact command and package name will vary depending on distribution. For Debian based distributions, including Ubuntu and Mint, the command would be: 

apt-get install libusb-1.0-0-dev


Next, download and unpack the following files:

Open the README file that is included at the top of each directory. This file will give you important information about how to properly install the files.


Libraries are installed in /usr/local/lib by default. If you run into trouble finding the libraries during linking or at runtime, this probably means that /usr/local/lib is not on the library path for your distribution.

You can handle this in a number of ways:

Specify a different install folder during compile 

./configure --prefix=/usr && make && sudo make install

OR Add /usr/local/lib to the system-wide library path 

echo /usr/local/lib >> /etc/ld.so.conf && sudo ldconfig

OR Add /usr/local/lib in your local shell every time 

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib

The libraries are now installed on your machine. Next, you should set the UDev Rules.

Setting UDev Rules

By default, Linux will not grant permission to regular users to access physical hardware as a security feature. This means that in order to run Phidgets code from user space you must grant yourself root privileges via sudo. For example:

sudo ./HelloWorld

You can grant access manually or, more commonly, set up a rules file to do it automatically keying off of the vendor code for Phidget USB devices. To do this, create a text file called "99-libphidget22.rules" with the following contents:

  1. All current and future Phidgets - Vendor = 0x06c2, Product = 0x0030 - 0x00af

SUBSYSTEMS=="usb", ACTION=="add", ATTRS{idVendor}=="06c2", ATTRS{idProduct}=="00[3-a][0-f]", MODE="666"

Where mode 666 means every user has permission to read and write to the specified file/device. You need to then move this file to "/etc/udev/rules.d". Now you can run Phidget related code as a regular user without the OS denying permission.

Verify

The best way to verify that your libraries are working properly is to compile and run an example program.


First, download and unpack this C example:

Note: If using the Debian intallation methods, you will need to install the libphidget22-dev package to use the C libraries for Phidget22

Next, open the terminal at the example location. Compile the example by entering the following command: 

 gcc HelloWorld.c -o HelloWorld -lphidget22


Run the HelloWorld example: 

./HelloWorld


Your terminal should look something like this:

Linux helloworld.PNG


The HelloWorld program will simply communicate when a Phidget has been attached or detached, as can be seen in the image above.


Your Phidget is now able to communicate with your development machine. The next step is selecting a programming language so you can start to write some code!

Programming

Ready to write some code? Select one of the programming languages below:

Core Languages Mobile Languages Other Languages
C Sharp C# Objective C Objective C LabVIEW LabVIEW
C/C++ C/C++ Swift Swift Max/MSP Max/MSP
Python Python Android Android Java
Java Java
Visual Basic .NET Visual Basic .NET
JavaScript JavaScript

Older Versions

If you need older versions of the Phidget22 Linux libraries, click here.

If you need Phidget21 Linux Libraries, click here.

Retrieved from "https://www.phidgets.com/docs/index.php?title=OS_-_Linux&oldid=34500"