Template:UgRelayOutput: Difference between revisions

Latest revision as of 20:15, 13 June 2017

Double-click on a Digital Output object labelled Power Relay in order to run the example: [[Image:{{{1}}}_RelayOutput_Example.jpg|center|link=]]

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

@@ Line 1: / Line 1: @@
 ===Relay Output===
+Double-click on a Digital Output object labelled ''Power Relay'' in order to run the example:
+[[Image:{{{1}}}_RelayOutput_Example.jpg|center|link=]]
-[[Image:{{{1}}}_RelayOutput_Example.jpg|right|link=]]
-When you double click on the "Power Relay" or "Signal Relay", a window like the one pictured will open.
+{{UGExampleDescription}}
+*Toggle the state of the relay by pressing the button.
-* At the top of the window, information about your device and the properties of this particular channel will be listed.
-* At the bottom is a button you can press to toggle the on/off state of the relay. If you have a test circuit hooked up to the relay, you should be able to toggle power to the circuit. If the relay is a mechanical relay, you should hear an audible click as the circuit closes.
 <br clear="all">