Template:UgVoltageInputSensor: Difference between revisions

Latest revision as of 16:35, 27 August 2018

Double-click on a Voltage Input object in order to run the example: [[Image:{{{1}}}_VoltageInputSensor_Example.jpg|center|link=]]

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
If you have an analog sensor connected that you bought from us, you can select it from the Sensor Type drop-down menu. The example will then convert the voltage into a more meaningful value based on your sensor, with units included, and display it beside the Sensor Value label. Converting voltage to a Sensor Value is not specific to this example, it is handled by the Phidget libraries, with functions you have access to when you begin developing!

For more information about Voltage Inputs, check out the Voltage Input Primer.

@@ Line 4: / Line 4: @@
-Information about the Phidget and the properties of the particular channel will be listed at the top of the window. You can also experiment with the following functionality:
+{{UGExampleDescription}}
 *Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page.
-*The raw voltage value is listed beside the ''Voltage'' label. If you have a Phidget sensor connected, select it from the drop-down menu. The example will automatically convert the raw voltage into a sensor value corresponding to your sensor.
+*If you have an analog sensor connected that you bought from us, you can select it from the ''Sensor Type'' drop-down menu. The example will then convert the voltage into a more meaningful value based on your sensor, with units included, and display it beside the ''Sensor Value'' label. Converting voltage to a ''Sensor Value'' is not specific to this example, it is handled by the Phidget libraries, with functions you have access to when you begin developing!
 <br clear="all">
+For more information about Voltage Inputs, check out the [[Voltage Input Primer]].