Template:UgVoltageInput: Difference between revisions

Revision as of 19:17, 19 June 2017

Double-click on the Voltage Input object, labelled {{{2}}}, in order to run the example: [[Image:{{{1}}}_VoltageInput_Example.jpg|center|link=]]

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

On the left, change trigger and/or data interval can be changed. For more information on these settings, see the Data Rate/Change Trigger page. If multiple voltage ranges are supported by the device, there will be an option to switch between them. "Auto" mode will automatically choose the best mode based on the present sensor readings.
On the right, the current reading of the raw voltage is listed beside "Voltage".

@@ Line 1: / Line 1: @@
 ===Voltage Input===
+Double-click on the Voltage Input object, labelled ''{{{2}}}'', in order to run the example:
+[[Image:{{{1}}}_VoltageInput_Example.jpg|center|link=]]
-[[Image:{{{1}}}_VoltageInput_Example.jpg|right|link=]]
-When you double click on an Voltage Input object, a window like the one pictured will open.
+{{UGExampleDescription}}
-* At the top of the window, information about your device and the properties of this particular channel will be listed.
 * On the left, change trigger and/or data interval can be changed. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|Data Rate/Change Trigger]] page. If multiple voltage ranges are supported by the device, there will be an option to switch between them. "Auto" mode will automatically choose the best mode based on the present sensor readings.
 * On the right, the current reading of the raw voltage is listed beside "Voltage".
 <br clear="all">