Template:UgVoltageInputSensor: Difference between revisions

From Phidgets Support
(Undo revision 27138 by Lmpacent (talk))
No edit summary
Line 1: Line 1:
===Voltage Input===
===Voltage Input===
Double-click on a Voltage Input object in order to run the example:
[[Image:{{{1}}}_VoltageInputSensor_Example.jpg|center|link=]]


[[Image:{{{1}}}_VoltageInputSensor_Example.jpg|right|link=]]


When you double click on an Voltage Input object, a window like the one pictured will open.
Information about the Phidget and the properties of the particular channel will be listed at the top of the window. You can also experiment with the following functionality:
 
*Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|data interval/change trigger]] page.
* At the top of the window, information about your device and the properties of this particular channel will be listed.  
*The raw voltage value is listed beside the ''Voltage'' label. If you have a Phidget sensor connected to the {{{1}}}, select it from the drop-down menu. The example will automatically convert the raw voltage into a sensor value corresponding to your sensor.
* On the left, change trigger and/or data interval can be changed. For more information on these settings, see the [[Data_Rate_and_Change_Trigger|Data Rate/Change Trigger]] page.
* On the right, the current reading of the raw voltage is listed beside "Voltage". Below, you can select the type of sensor you have connected to any of the sensors sold by Phidgets. When you do, the sensor value below will convert the raw voltage into the appropriate measurement in the units of that sensor.
<br clear="all">
<br clear="all">

Revision as of 23:23, 12 June 2017

Voltage Input

Double-click on a Voltage Input object in order to run the example: [[Image:{{{1}}}_VoltageInputSensor_Example.jpg|center|link=]]


Information about the Phidget and the properties of the particular channel will be listed at the top of the window. You can also experiment with the following functionality:

  • Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
  • The raw voltage value is listed beside the Voltage label. If you have a Phidget sensor connected to the {{{1}}}, select it from the drop-down menu. The example will automatically convert the raw voltage into a sensor value corresponding to your sensor.


Retrieved from "https://www.phidgets.com/docs/index.php?title=Template:UgVoltageInputSensor&oldid=27140"