Template:UgIR: Difference between revisions
From Phidgets Support
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
===IR | ===IR=== | ||
Double-click on the IR object, labelled ''PhidgetIR'', in order to run the example: | Double-click on the IR object, labelled ''PhidgetIR'', in order to run the example: | ||
[[Image:IR_Example.jpg|center|link=]] | [[Image:IR_Example.jpg|center|link=]] | ||
Revision as of 17:19, 21 June 2017
IR
Double-click on the IR object, labelled PhidgetIR, in order to run the example:
General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:
- The Show RAW Data checkbox toggles the RAW data window. This window lets you see incoming codes as pulses and gaps (expressed as numbers in milliseconds). You can also re-transmit this raw data.
- IR Code: the hexadecimal code corresponding to the signal just received.
- Repeat Count: how many times the same code has been received in a row. If you hold down a button on most remote controllers, it will continually transmit repeat codes.
- Bit Length: the length of the code in bits.
- When a code is repeated multiple times, the {{{1}}} will learn the code. It will display the relevant information in the Learn box. For more information, see the technical section.
