ENC4110-4114 User Guide: Difference between revisions
From Phidgets Support
(Created page with "== Mounting the Encoder to a Surface == This linear encoder has mounting holes on either end that allow it to be mounted perpendicular or parallel to a surface. Image:ENC...") |
No edit summary |
||
| Line 3: | Line 3: | ||
This linear encoder has mounting holes on either end that allow it to be mounted perpendicular or parallel to a surface. | This linear encoder has mounting holes on either end that allow it to be mounted perpendicular or parallel to a surface. | ||
[[Image: | [[Image:ENC4110_Mount1.jpeg|300px|link=]] [[Image:ENC4110_Mount2.jpeg|314px|link=]] | ||
When mounting the encoder to a surface, you should take great care in making sure that it lies completely flat and parallel to the moving part it'll be measuring. Any small misalignment can cause inaccuracy in the measurement and strain on the mechanical parts. | When mounting the encoder to a surface, you should take great care in making sure that it lies completely flat and parallel to the moving part it'll be measuring. Any small misalignment can cause inaccuracy in the measurement and strain on the mechanical parts. Metal shims are included in case you need to raise one end slightly. | ||
[[Image:ENC4110_Shim1.jpeg|300px|link=]] [[Image:ENC4110_Shim2.jpeg|300px|link=]] | |||
== Carriage Mounting Plates == | == Carriage Mounting Plates == | ||
[[Image:ENC4110_Plate1.jpeg|300px|link=]] [[Image:ENC4110_Plate2.jpeg|300px|link=]] [[Image:ENC4110_Plate3.jpeg|300px|link=]] [[Image:ENC4110_Plate4.jpeg|300px|link=]] | |||
== Debris Shield == | == Debris Shield == | ||
[[Image:ENC4110_Debris.jpeg|300px|link=]] | |||
== Cable Mounts == | == Cable Mounts == | ||
[[Image:ENC4110_Cablemount.jpeg|300px|link=]] | |||
Revision as of 20:56, 27 July 2018
Mounting the Encoder to a Surface
This linear encoder has mounting holes on either end that allow it to be mounted perpendicular or parallel to a surface.
When mounting the encoder to a surface, you should take great care in making sure that it lies completely flat and parallel to the moving part it'll be measuring. Any small misalignment can cause inaccuracy in the measurement and strain on the mechanical parts. Metal shims are included in case you need to raise one end slightly.
Carriage Mounting Plates
Debris Shield
Cable Mounts
