Template:PT1 HUB5000 MAC MOB: Difference between revisions

From Phidgets Support
(Created page with "<div class="phd-slide-deck" data-deck="PT1_HUB5000_MAC_MOB"> <div class="phd-slide-deck-header"><h3>Connection (Mobile)</h3></div> <div class="phd-slides"> <div class="phd-sli...")
 
No edit summary
Line 87: Line 87:


<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_MAC_MOB/-x350/50/mac_hub5000_control.jpg"></div>
<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_MAC_MOB/-x350/50/mac_hub5000_control.jpg"></div>
</div>
<div class="phd-slide">
<h2>Step 5: Update</h2>
<p>
Now that you've confirmed that you have access to your Phidgets, you should ensure the HUB5000 is fully updated. You can update the firmware of the VINT Hub by
going back to the Phidget Control Panel. If the name of the device is red, it means an update is available:
</p>
<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_MAC_MOB/-x350/50/mac_update1.jpg"></div>
<p>
To upgrade the firmware of the operating system on the HUB5000, download the most recent file
<span>[https://www.phidgets.com/downloads/phidgetsbc/HUB5000/phidgethub5000.bin here]</span>.
</p>
<p>
Next, go back to the web configuration page and click on the <b>System</b> tab. Scroll down to <b>Upgrade Firmware</b> and select the file you download and hit
<b>Upgrade & Restart</b>. You'll be instructed to wait a few minutes before logging back into the web interface.
</p>
<p>
When you log back in, you can confirm that the new version has successfully installed by checking to see if the firmware version listed in the
<b>Status</b> section matches the first three numbers in the firmware file name that you downloaded.
</p>
</div>
</div>


Line 92: Line 118:
<h2>Done!</h2>
<h2>Done!</h2>


<p>If you're able to see and interact with your devices in the Phidget Control Panel, you're done with the Setup part of this guide.</p>
<p>Now that you're able to see and interact with your devices in the Phidget Control Panel, you're done with the Setup part of this guide.</p>


<p>Scroll down to <b>Part 2: Using Your Phidget</b> for the next step.</p>
<p>Scroll down to <b>Part 2: Using Your Phidget</b> for the next step.</p>

Revision as of 15:19, 18 July 2023

Connection (Mobile)

Step 3: Connect Wireless

1. When you connect the power supply to the HUB5000, the red LED should turn on.

Step 3: Connect Wireless

2. On your mobile device, go to the Wi-Fi settings and connect to the HUB5000:

Step 3: Connect Wireless

3. When asked for a password, enter the password printed on the HUB5000’s label.

Step 3: Connect Wireless

4. Once your device is connected to the HUB5000’s WiFi signal:

Click on the WiFi network and find an option that says “Manage router” or “Visit homepage”.

Go to your internet browser and type 192.168.100.1 in the address bar.

Step 3: Connect Wireless

5. Create a password for your HUB5000. You'll use this password to access the Configure Page from now on.

Step 3: Connect Wireless

6. Navigate to the network page. Change the Mode to Client.

Step 3: Connect Wireless

7. Enter your Wifi Network details and click Save & Apply. It may take a few minutes for your Phidgets to appear in the Phidget Control Panel, which we’ll check in the next step.

Step 4: Verify Connection

1. Open the Phidget Control Panel:

Step 4: Verify Connection

2. If connected, your Phidgets will appear in the Phidget Control Panel.

Step 5: Update

Now that you've confirmed that you have access to your Phidgets, you should ensure the HUB5000 is fully updated. You can update the firmware of the VINT Hub by going back to the Phidget Control Panel. If the name of the device is red, it means an update is available:

To upgrade the firmware of the operating system on the HUB5000, download the most recent file here.

Next, go back to the web configuration page and click on the System tab. Scroll down to Upgrade Firmware and select the file you download and hit Upgrade & Restart. You'll be instructed to wait a few minutes before logging back into the web interface.

When you log back in, you can confirm that the new version has successfully installed by checking to see if the firmware version listed in the Status section matches the first three numbers in the firmware file name that you downloaded.

Done!

Now that you're able to see and interact with your devices in the Phidget Control Panel, you're done with the Setup part of this guide.

Scroll down to Part 2: Using Your Phidget for the next step.


For more info installing in MacOS (e.g. developer tools, driver extension, etc.), visit this page:

● MacOS Advanced Information

«
»
Retrieved from "https://www.phidgets.com/docs/index.php?title=Template:PT1_HUB5000_MAC_MOB&oldid=33861"