Template:UgIR: Difference between revisions

From Phidgets Support
(Created page with "===IR Receiver/Transmitter=== right|link= When you double click on an IR Receiver/Transmitter object, a window like the one pictured will open. *...")
 
No edit summary
Line 1: Line 1:
===IR Receiver/Transmitter===
===IR Receiver/Transmitter===
Double-click on the IR object, labelled ''PhidgetIR'', in order to run the example:
[[Image:IR_Example.jpg|center|link=]]


[[Image:IR_Example.jpg|right|link=]]


When you double click on an IR Receiver/Transmitter object, a window like the one pictured will open.
{{UGExampleDescription}}
 
* The ''Show RAW Data'' checkbox toggles the RAW data window. This window lets you see incoming codes as pulses and gaps (expressed as numbers in milliseconds). You can also re-transmit this raw data.
* At the top of the window, information about your device and the properties of this particular channel will be listed.  
*Code data is described:
* In the middle of the window, basic data about the last code received is displayed:
** '''IR Code:''' the hexadecimal code corresponding to the signal just received.
** '''IR Code:''' The hexadecimal code corresponding to the signal just received.
** '''Repeat Count:''' how many times the same code has been received in a row. If you hold down a button on most remote controllers, it will continually transmit repeat codes.
** '''Repeat Count:''' How many times the same code has been received in a row. If you hold down a button on most remote controllers, it will continually transmit repeat codes.
** '''Bit Length:''' the length of the code in bits.
** '''Bit Length:''' The length of the code in bits.
*When a code is repeated multiple times, the {{{1}}} will ''Learn'' the code. It will display the relevant information in the ''Learn'' box. For more information, see the [[#Technical_Details|technical section]].
* At the bottom, various information about the most recently learned code is displayed. For more information on these properties, see the [[#Technical_Details|technical section]].
* The "Show RAW Data" checkbox toggles the RAW data window, which lets you see incoming codes as pulses and gaps (expressed as numbers in milliseconds). You can also re-transmit this raw data.
<br clear="all">
<br clear="all">

Revision as of 21:25, 14 June 2017

IR Receiver/Transmitter

Double-click on the IR object, labelled PhidgetIR, in order to run the example:

IR Example.jpg


General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • The Show RAW Data checkbox toggles the RAW data window. This window lets you see incoming codes as pulses and gaps (expressed as numbers in milliseconds). You can also re-transmit this raw data.
  • Code data is described:
    • IR Code: the hexadecimal code corresponding to the signal just received.
    • Repeat Count: how many times the same code has been received in a row. If you hold down a button on most remote controllers, it will continually transmit repeat codes.
    • Bit Length: the length of the code in bits.
  • When a code is repeated multiple times, the {{{1}}} will Learn the code. It will display the relevant information in the Learn box. For more information, see the technical section.


Retrieved from "https://www.phidgets.com/docs/index.php?title=Template:UgIR&oldid=27296"