1064 User Guide

Getting Started

Welcome to the 1064 user guide! In order to get started, make sure you have the following hardware on hand:

• 1064 PhidgetMotorControl HC
• USB cable and computer
• power supply
• DC Motor

Next, you will need to connect the pieces:

1. Connect the motor to one of the PhidgetMotorControl's outputs.
2. Connect the power supply to the terminal block on the board.
3. Connec the Phidget to your computer using the USB cable.

Now that you have everything together, let's start using the 1064!

Using the 1064

Phidget Control Panel

In order to demonstrate the functionality of the 1064, the Phidget Control Panel running on a Windows machine will be used.

The Phidget Control Panel is available for use on both macOS and Windows machines.

Windows

To open the Phidget Control Panel on Windows, find the icon in the taskbar. If it is not there, open up the start menu and search for Phidget Control Panel

macOS

To open the Phidget Control Panel on macOS, open Finder and navigate to the Phidget Control Panel in the Applications list. Double click on the icon to bring up the Phidget Control Panel.

For more information, take a look at the getting started guide for your operating system:

• Getting started with Windows
• Getting started with macOS

Linux users can follow the getting started with Linux guide and continue reading here for more information about the 1064.

First Look

After plugging the 1064 into your computer and opening the Phidget Control Panel, you will see something like this:

The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

• Serial number: allows you to differentiate between similar Phidgets.
• Channel: allows you to differentiate between similar objects on a Phidget.
• Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.

The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

DC Motor

Double-click on the DC Motor object, labelled {{{2}}}, in order to run the example:

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

• Toggle the BackEMF Sensing checkbox to enable/disable back-EMF sensing on the 1064.
• Drag the Target Velocity slider from -1 (full reverse) to 1 (full forward) to make the motor move.
• Manipulate the Acceleration slider to increase/decrease the amount of time it takes the DC Motor to reach a target velocity.

Current Input

Double-click on the Current Input object , labelled DC Motor Current Sensor, in order to run the example:

General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

• Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.

Technical Details

For more information about DC motors and how to control them, check the DC Motor and Controller Primer.

What to do Next

• Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
• Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.