Template:UgVoltageRatioAxis: Difference between revisions
From Phidgets Support
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
===Voltage Ratio Input (Axis)=== | ===Voltage Ratio Input (Axis)=== | ||
[[Image:{{1}}_VoltageRatioSensor_Example.jpg|right|link=]] | [[Image:{{{1}}}_VoltageRatioSensor_Example.jpg|right|link=]] | ||
When you double click on an Joystick Axis object, a window like the one pictured will open. | When you double click on an Joystick Axis object, a window like the one pictured will open. | ||
Revision as of 19:05, 15 September 2017
Voltage Ratio Input (Axis)
[[Image:{{{1}}}_VoltageRatioSensor_Example.jpg|right|link=]]
When you double click on an Joystick Axis object, a window like the one pictured will open.
- At the top of the window, information about your device and the properties of this particular channel will be listed.
- On the left, change trigger and/or data interval can be changed. For more information on these settings, see the Data Rate/Change Trigger page.
- On the right, the voltage ratio is reported in volts per volt. In this case, a value of 1.0 corresponds to the maximum tilt in one direction of the axis, and a value of -1.0 corresponds to the maximum tilt in the other direction. Note: The stick will not be able to fully reach the -1.0 or 1.0 position while inside the enclosure.
