HUB0003 User Guide
From Phidgets Support
Required Hardware
- A HUB0003 7-Port USB Hub
- A Power Supply
- A USB cable
- Other USB Devices
Connecting the Pieces
- Connect the HUB0003 to your computer using the USB cable.
- Connect the Power Supply to the barrel jack on the HUB0003.
- Connect other USB devices to the USB ports on the HUB0003. Those devices should connect to your computer as if they were connected directly to the computer.
Technical Details
Power Requirements
As per USB standards, a USB device can be expected to consume a maximum of 0.5 amps. Therefore, you should select a power supply for the HUB0003 with a power rating of at least 17.5 watts (i.e. 3.5 amps at 5 volts) if you want to run all seven ports at maximum load with no problems. If there isn't enough power to go around, your attached Phidgets might periodically disconnect and reconnect. All of the power supplies sold at Phidgets are at least 24 watts, so you will be fine with any one of them.
What to do Next
- Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
- Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.
