Template:UgFrequencyCounter
From Phidgets Support
Frequency Counter
Double-click on the Frequency Counter object in order to run the example: [[Image:{{{1}}}_FrequencyCounter_Example.jpg|center|link=]]
General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:
- Toggle the Enabled checkbox to enable/disable the {{{1}}}.
- Enter a Frequency Cutoff(Hz) and the {{{1}}} will ignore frequencies below the specified value.
- Enter a filter type from the Filter Type drop-down menu. A Logic Level signal goes from alternates between 0 and VCC. A Zero Crossing signal goes from -VCC to VCC.
- Modify the data interval value by dragging the slider. For more information on this setting, see the data interval page.
- Frequency data is described:
- Frequency: the average frequency calculated from the pulses in the event so far.
- Total Count: the total number of pulses since opening the example.
- Total Time: the total time in milliseconds that has elapsed since opening this example.
