SAF2000 User Guide
From Phidgets Support
Getting Started
Welcome to the SAF2000 quick start guide! In order to get started, make sure you have the following hardware on hand:
- SAF2000 Power Guard Phidget
- Power Supply
- Motor Controller
- Wires, Fuses, etc.
Next, you will need to connect the pieces:
- Connect the power supply to the barrel jack on the SAF2000.
- Connect wires from the SAF2000's ground and power terminals to the device's ground and power terminals. Ensure that you use wires with an appropriate gauge for the amount of current in your system.
- Follow the instructions on the User Guide for the powered device you're using.
Technical Details
The Power Guard Phidget 30V 5A (SAF2020) protects both your system from power surges caused by motors.
This device uses a diode to prevent current flowing back into the power supply, so expect a slight drop in the voltage seen by the powered device when in normal operation.
For more information, view our Power Guard Guide.
What to do Next
- Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
- Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.
