Template:UGEncoderENABLE
From Phidgets Support
Encoder
Double-click on the Encoder object, labelled Encoder Input, in order to run the example: [[Image:{{{1}}}_Encoder_Example.jpg|center|link=]]
General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:
- Toggle the Enabled checkbox to enable/disable the {{{1}}}.
- Specify a counts per revolution (CPR) value to enable velocity calculation.
- Encoder data is described:
- Position Change: the number of ticks (or quadrature cycles) that have occurred since the last change event.
- Time Change: the amount of time in milliseconds that has elapsed since the last change event.
- Position: the total position in ticks relative to where the encoder was when the window was opened.
- Index Position: the position where the index channel was last encountered. Some encoders do not support index, check your encoder's datasheet for more information.
- Velocity: the average velocity in rotations per second. A CPR must be specified to enable this functionality.
