Electricity Primer

From Phidgets Support
Revision as of 17:55, 12 January 2012 by Cora (talk | contribs)

Shielding

  • Hard to do right
  • Emissions hit shield and travel back to ground with resonance

Size of circuit

  • Circuits are always loops, and loops will resonate like antennas at a frequency determined by their size
  • The smaller the loop, the higher the frequency
  • Higher frequencies have a smaller potential to interfere with circuit frequencies
    • Keep hookup wires short

Multiple power sources

  • USB is one source, wall and battery power is another
  • With only one device, not really a problem
  • With more than one device, you create a closed loop between the two devices and the power source
    • Electrons can return via the grounds connecting both devices and the PC motherboard rather than just straight to wall or battery ground
    • Solutions:
      • Make the connections between all devices and battery or wall really desirable to electrons
        • Low resistance
        • Big fat wire
        • As short a wire as possible
      • Use a USB isolator
      • Use Ethernet for data rather than USB (or wireless), only for future Phidgets

Introduction

This primer will help you