1002 User Guide

Getting Started

Checking the Contents

You should have received: A PhidgetAnalog 4-Output A Mini-USB cable A Hardware Mounting Kit

In order to test your new Phidget you will also need: A device requiring a 0 to 10V signal A multimeter could also be used to monitor the output voltage

Connecting the Pieces

Connect your device to the PhidgetAnalog board using one of the terminal blocks. Connect the PhidgetAnalog 4-Output to your computer using the Mini-USB cable.

Testing Using Windows 2000 / XP / Vista / 7

Make sure you have the current version of the Phidget library installed on your PC. If you don't, follow these steps:

1. Go to the Quick Downloads section on the Windows page
2. Download and run the Phidget21 Installer (32-bit, or 64-bit, depending on your system)
3. You should see the icon on the right hand corner of the Task Bar.

Running Phidgets Sample Program

Double clicking on the icon loads Phidget Control Panel; we will use this program to ensure that your new Phidget works properly.

The source code for the Analog-full sample program can be found in the quick downloads section on the C# Language Page. If you'd like to see examples in other languages, you can visit our Languages page.