Template:UgDigitalInputISA
From Phidgets Support
Digital Input
When you double click on an Digital Input object, a window like the one pictured will open.
- At the top of the window, information about your device and the properties of this particular channel will be listed.
- At the bottom there is a box that will display "true" or "false" depending on the state of the digital input. Be sure you select the proper mode (NPN / PNP) for your particular sensor. If you have a switch, you can test this input by connecting the white wire of the sensor cable to one of the switch's terminals, and the red wire to another. Pressing the switch should cause the input to read "true".
