Phidget Programming Basics
It is important to understand what a Phidget is, and how the hardware and software relate to one another before writing software using the Phidget22 API. Please refer to What is a Phidget? for an introduction.
The Phidget software library matches a Phidget device channel with a software channel that is created by a user.
Software channels are each of a class, where that class defines a set of methods, properties, events and errors. Phidget devices are aware of the channel classes, and expose access to features of the device through the class interface.
To use a Phidget, you'll want to:
- Create an instance of the channel class that provides access to the device you want to control.
- Open the channel.
- Detect when the channel is attached to the Phidget.
- Use methods and properties of the attached channel.
- Close the channel.
Small code snippets are provided for each step in the sections below. Java and C were selected because Java is a high-level language and C is a low level language. The best reference to the features each channel class is the Phidget22 API for your specific language. This page is intended to be a high-level introduction.
Creating a Channel
A Phidget device exposes one or more device channels where each channel is an interface to a feature of the hardware. A channel class defines an interface to control and query a channel of the Phidget device. For example, a 1018 - Phidget InterfaceKit device includes support
for digital input and digital out, and therefore exports DigitalInput and DigitalOutput channels.
Phidget devices are controlled by creating an instance of a Phidget channel class. Each channel class has a function that allows you to create an instance, and a function to later delete the instance.
For example, in Java:
// Create a new Accelerometer channel
Accelerometer accel = new Accelerometer();
// Create a new RFID channel
RFID rfid = new RFID();
Or in C:
// Create a new Accelerometer channel
PhidgetAccelerometerHandle accel;
PhidgetAccelerometer_create(&accel);
// Create a new RFID channel
PhidgetRFIDHandle rfid;
PhidgetRFID_create(&rfid);
A channel class will have properties and methods specific to the feature they belong to. For example, the VoltageInput class has a Voltage property that lets you access the current voltage measured by the device, the Accelerometer class has properties to set the sensitivity on each axis and the RFID has a method that writes to a writable RFID tag.
Opening a Channel
After you have created a channel instance, you can call the open() method to begin the process of matching the channel to a Phidget device channel.
For example, with the Accelerometer channel in Java:
accel.open();
Or in C:
Phidget_open((PhidgetHandle) accel);
To see how to use open() in other languages, please refer to the Phidget22 API.
The open() function begins the process of matching the channel handle you created to a channel of a Phidget device, and does not actually open the Phidget itself. An open channel may match a new Phidget device when it is plugged in if that channel has not already found a Phidget device channel that meets its criteria.
Details for Open()
Because open() simply enables the process of matching a channel to a Phidget device channel, open() returns immediately and does not wait for the channel to attach to a Phidget device channel. The channel changes state to open, but is not necessarily attached. Until the channel actually becomes attached to a Phidget device channel, most of the channel class interface will not be available.
As long as the channel is open (and not attached), the system will continue to try to match it with a
Phidget device channel that has not already been matched with a channel. The channel can only be matched once, and the Phidget device channel can only be matched once. For example, if you connected a single Phidget Accelerometer to a computer, and you created and opened two Accelerometer channels, only one of the channels would attach while the other would remain open but not attached. If the attached channel were to be closed, the other channel would then attach to the Accelerometer.
When the channels is matched with a Phidget device channel, the channel state is changed to attached and an event is fired.
Note: Once a Phidget device channel is matched to a channel, it will not be available to match another channel until the first channel is closed. The one exception is if the Phidget device channel is attached over the network through the Phidget Network Server. In that case, multiple channels are allowed to match and attach to the Phidget device channel. Some Phidgets, such as motor controllers will never match more than one channel at a time.
Channel Matching
open() can be used without specifying any matching properties. In this case the system will match a channel with the first Phidget device channel that matches the channel class. The channel class itself is an implied matching parameter.
If there is more than one Phidget connected to the computer that supports the channel class, the DeviceSerialNumber property must be set determine which Phidget will match.
If the Phidget connected to the computer has more than one channel of the same classes, the Channel property must be set to determine which Phidget device channel will match.
If the Phidget Network Server is enabled on the computer, the IsRemote and IsLocal properties can be used to determine if the channel will match the Phidget device channel or the network channel.
Please refer to the Phidget22 API, and Best Practices for more information on matching channels to Phidget device channels.
Opening a Channel on a USB Phidget
In this example, a 1018 PhidgetInterfaceKit 8/8/8 is connected to a computer. A 1108 Magnetic Sensor is connected to analog port 3 on the 1018. Here's how you would open the channel for the magnetic sensor in Java:
VoltageRatioInput ch = new VoltageRatioInput();
ch.setDeviceSerialNumber(324781);
ch.setChannel(3);
ch.open();
If you wanted to open digital input 5 in the same example, it would look like this:
DigitalInput ch = new DigitalInput();
ch.setDeviceSerialNumber(324781);
ch.setChannel(5);
ch.open();
Opening a VINT Hub Port as a Channel
The ports on a VINT Hub can be opened as Digital Inputs, Digital Outputs, Voltage Inputs, or Voltage Ratio Inputs. Suppose you had a HUB0000 VINT Hub with a 1133 Sound Sensor connected to its sixth port.
Here's how you would open it in Java:
VoltageInput ch = new VoltageInput();
ch.setDeviceSerialNumber(370181);
ch.setIsHubPortDevice(true);
ch.setHubPort(6);
ch.open();
Opening a Channel on a VINT Device
In this example, we have a TMP1101 4x Thermocouple Phidget and a HUB0000 VINT Hub.
If we wanted to open both the thermocouple connected to port 0 and the integrated temperature sensor on the board, we first need to figure out which channels those are. Go to the product page for the TMP1101 and click on the API tab. From the table at the top of the tab, we can see that the integrated temperature sensor is TemperatureSensor channel 4. In Java, opening these channels would look like this:
TemperatureSensor tc = new TemperatureSensor(); // Handle for the thermocouple
TemperatureSensor ic = new TemperatureSensor(); // Handle for the integrated temperature chip
tc.setDeviceSerialNumber();
ic.setDeviceSerialNumber();
tc.setHubPort(2);
ic.setHubPort(2);
tc.setChannel(0);
ic.setChannel(4);
tc.open();
ic.open();
Opening a Channel on a Remote Phidget
Suppose you wanted to open a locally connected Phidget remotely over the Network Service, so that you could have multiple programs connecting to it at the same time. In this example, we have a 1024 PhidgetRFID connected to a computer that has the Phidget Network Server enabled.
You could open the RFID reader channel remotely with the following code in Java:
RFID ch = new RFID();
ch.setDeviceSerialNumber(388624);
ch.setIsRemote(true);
ch.open();
Attaching a Channel
When a channel is open (and not attached), the system will continue to try to match it with a Phidget device channel until either a match is found, or the channel is closed. When the channels is matched with a Phidget device channel, the channel state is changed to attached and an event is fired.
An event handler can be registered to catch the attach event through the channel's Attach event. Each channel also has a Attached property that can be read to determine if the class has
been matched to a Phidget device channel.
To set an event handler to detect the attach in Java:
//create a Phidget accelerometer channel:
Accelerometer accel = new Accelerometer();
accel.addAttachListener((AttachEvent ae) -> {
Accelerometer accel = (Accelerometer) ae.getSource();
// Do things after attachment (i.e. read data, control the device)
}
});
Or in C:
// Define the attach handler function
void CCONV onAttachedEventHandler(PhidgetHandle channel, void *userPtr) {
printf("A channel has been attached\n");
// Do things after attachment (i.e. read data, control the device)
}
int main() {
// .....Then, in the main code create the channel and set the attach handler:
PhidgetAccelerometerHandle accel;
PhidgetAccelerometer_create(&accel);
Phidget_setOnAttachHandler((PhidgetHandle)accel, onAttachedEventHandler, NULL);
// other stuff in main
}
You should set the attach event handler before you open() the channel; otherwise, you may miss attach event if it occurs between opening the channel and setting the handler.
Do Things with a Channel
After a channel has been opened and attached, software can control the Phidget device via the channel class interface.
Like setting an event handler that executes when the channels is attached, handlers can be set to receive events when a state change occurs, or sensor data is received.
A Voltage Input channel for example, like one supported by the 1018 Phidget Interface Kit, can set an event handler that gets called as the voltage is processed.
In Java, this would look like:
// After creating and opening a VoltageInput channel called "sensorIn"
sensorIn.addVoltageChangeListener((VoltageInputVoltageChangeEvent de) -> {
System.out.println("Voltage: " + de.getVoltage());
});
Or in C:
void CCONV
onVoltageChangeHandler(PhidgetVoltageInputHandle voltageInput, void *ctx, double voltage) {
printf("Voltage: %lf V\n", voltage);
}
// .....Then, in the main code:
// After creating and opening a VoltageInput channel called "sensorIn"
PhidgetVoltageInput_setOnVoltageChangeHandler(sensorIn, onVoltageChangeHandler, NULL);
The voltage value delivered in the above snippets could also be accessed via the Voltage property of the channel. Properties that have related events are automatically updated each time the event is received by the channel, and calls between events always return the value set by the last event.
double val = sensorIn.getVoltage();
Or, in C:
double val;
PhidgetVoltageInput_getVoltage(sensorIn, &val);
Sensors, Input, and Output
Often, your Phidget will support more than one channel class. For example a 1018 Phidget Interface Kit has voltage inputs (black sensor ports), digital inputs and digital outputs (green terminal blocks). You can determine the channel classes supported by your Phidget from the product page and the Phidget22 API.
For InterfaceKits like the 1018:
- To the voltage inputs, you can attach various sensors (temperature, humidity, light, sound)
- To the digital inputs, you can attach various input devices (switches)
- To the digital outputs, you can attach simple indicators (LEDs, buzzers, relays)
The features and channels supported by each Phidget are many and varied, and we only include general concepts on this page. You can view the complete list of channels supported by a Phidget in the Phidget22 API. Select a device at the top of the screen, select your preferred programming language, and then select which channel class you want to view the documentation for.
Close a Channel
When you are finished with a channel, you should close and (in some languages) delete it. Once closed, the Phidget device channel the channel was matched to will be released and made available for another channel to match.
For example, in Java:
device.close();
device = null;
Or, in C:
Phidget_close((PhidgetHandle)channel);
Phidget_release((PhidgetHandle)&channel); // will NULL the pointer
Further Reading
Data Interval/Change Trigger - Learn about these two properties that control how much data comes in from your sensors.
Using Multiple Phidgets - How to know you are attaching to the Phidget you want.
Polling vs. Events - Your program can gather data in either a polling-driven or event-driven manner. Learn the difference to determine which is best for your application.
Logging, Exceptions, and Errors - Learn about all the tools you can use to debug your program.
Phidget Network Server - Phidgets can be controlled and communicated with over your network- either wirelessly or over ethernet.
Best Phidgets Practices - Good programming habits that will save you from common problems when writing code for your Phidgets.
