Template:VINTTable

VINT Device Mode This mode is for connecting to a VINT device. The VINT Hub and VINT device communicate using a digital protocol.
Digital Input Mode In digital input mode, the VINT Hub port can act as an active-low digital input. This mode is great for reading the state of buttons, switches, and any other logic-level input.	Voltage Ratio Input Mode In voltage ratio input mode, the VINT Hub port will read the voltage on the white wire and compare it to the voltage supplied on the red wire. This mode will let you read any ratiometric Phidget sensor.
Voltage Input Mode In voltage input mode, the VINT Hub port will read the voltage on the white wire. This can be used to interface a non-ratiometric sensor or to measure the voltage in a 5V digital circuit.	Digital Output Mode In digital output mode, a VINT Hub port can behave like a 3.3V digital output. You could use this mode to blink an LED or switch on a MOSFET.