Data Logging With a Thermocouple

The project described here is a data recording program for the Phidget Temperature Sensors. We play with the program and record data to learn things about our environment. The emphasis in this project is on passing data and writing to files in different languages, to also learn about data logging in general.

Practical concepts covered are (click on links to see other projects on that topic): Data Logging Writing to a text file Adding timestamps to your data Using Phidgets with C/C++ Using Phidgets with Python Using Phidgets with Java Analyzing your Phidget Data

As with any of our described projects, Phidgets takes care of the electrical component design. Here, we also provide some simple code so you can play around with your Temperature Sensor and thermocouple, and save the data to plot later.

Time:	About two hours for the basics, three hours for looking at and analysing the data
Special Needed Tools:	Something hot (tea, your skin), or something cold (ice, etc)
Materials and Phidgets:	A Phidget Temperature Sensor (1048 or 1051), a Thermocouple, a USB cord, and your computer

Also:

• You should have already worked through our Phidget Temperature Sensor Getting Started Guide for your Temperature Sensor - this will show you how to get the the Phidget Libraries installed for your operating system.
• Your computer should have at least one of:
  • A version of Python 2.6 or later, set up with the Python Phidget Libraries
  • A version of Java, set up with the Java Phidget Libraries
  • If you are using Linux (or the Phidget SBC), you can also use the gcc C compiler
    • Set up the Phidget C libraries on Linux
    • Set up gcc for development on the Phidget SBC
• If you would like to follow along with the graphing examples, you can install the R Statistical package, which is free and available for Windows, Mac, and Linux.

Introduction

This application guide is all about basic data logging and analysis with Phidgets. The ability to write an automatic data logger is one of the strong advantages to Phidgets - you do not have to take visual readings of a thermometer (or other sensor) and record the readings in a log book manually, rather, you can simply log directly to a computer.

Thermocouples provide a way to inexpensively measure the temperature of a material through physical contact. Although we use thermocouples and a Phidget Temperature Sensor (1048 or 1051) as our Phidget to log data from, basic data logging will be similar for many other Phidgets.

Phidgets

To use the code in this Guide, you will need to have a Phidget Temperature sensor and a thermocouple.

Some example ways to set this up are:

Example Setup	Strengths
1051 - PhidgetTemperatureSensor 1-Input, plus 3107 - TPK-01 Bead Probe K-Type Thermocouple (-50°C to +200°C)	Basic thermocouple setup
1048 - PhidgetTemperatureSensor 4-Input, plus 3107 - TPK-01 Bead Probe K-Type Thermocouple (-50°C to +200°C)	Ability to measure multiple points
1051 - PhidgetTemperatureSensor 1-Input, plus 3110 - TPK-01H Bead Probe K-Type Thermocouple (-50°C to +785°C)	Wide temperature range thermocouple

Of course, these are only examples - any thermocouple with either Temperature Sensor Phidget board will work.

We will log data from thermocouple port 0. On a one-input board, this is the only thermocouple input; on a four-input board, make sure you have a thermocouple plugged in to port 0:

Then:

• Make sure you have followed the Getting Started guide for your Phidget
• Make sure you have the programming language libraries that you want installed
• Plug the USB in to your computer
• Continue on to the next section and start writing code!

Code

C Code and Discussion

If you are using Windows, please refer to the Java or Python section as the C code was written on Linux. The use of Phidgets in C on any operating system is the same. However, ANSI-based C does not include support for getting time on any resolution smaller than one second. So, to obtain timing for the data as it comes in, we need to use operating-system specific code. It would probably be fairly straightforward to modify this code to use a Windows method of obtaining time.

You will need to link in both the Phidgets library (-lphidget21) and the Real Time POSIX library (-lrt) when compiling your code:

Putting it All Together

The code above saves the data from the Temperature Sensor Phidget into a Comma Separated Value file (*.csv). It will be named based on the code snippet you use and written into the directory where you run the code:

• Java code writes to "temperature_data_java.csv"
• Python code writes to "temperature_data_py.csv"
• C code writes to "temperature_data.csv"

Data Analysis

Extra Credit

• As mentioned above, the thermocouple is a contact temperature sensor - it works by becoming the same temperature as the material it is touching. There were a few materials