Language - Visual Basic Script: Difference between revisions

Revision as of 21:06, 25 May 2012

VBScript (Visual Basic Scripting Edition) is an Active Scripting language developed by Microsoft that is modeled on Visual Basic.

Introduction

If this is your first time working with a Phidget, we suggest starting with the Getting Started page for your specific device. This can be found in the user guide for your device. That page will walk you through installing drivers and libraries for your operating system, and will then bring you back here to use VBScript specifically.

VBScript is capable of using the complete Phidget API, including events. We also provide example code in VBScript for the Phidget Encoder, Interface Kit and RFID boards.

VBScript can be developed with various script editors, although the programs themselves only run in Internet Explore (IE).

You can compare VBScript with our other supported languages.

Quick Downloads

Just need the VBScript documentation, drivers, libraries, and examples? Here they are:

Documentation

.COM API Manual

Example Code

Example Code

Libraries and Drivers

Getting started with VBScript

If you are new to writing code for Phidgets, we recommend starting by running, then modifying existing examples. This will allow you to:

Make sure your libraries are properly linked
Go from source code to a test application as quickly as possible
Ensure your Phidget is hooked up properly

Visual Basic script is only supported under Windows 2000 / XP / Vista / 7, and then for use only under Internet Explorer.

Windows (2000/XP/Vista/7)

Use Our Examples

We provide Hello World examples for both Internet Explorer (IE) and for Windows Script Host (WSH).

Write Your Own Code

To begin, load the HTML editor of your choice and create a new document. Add a table to body of the code for the purpose of displaying simple output.

  <html>
  <head> 
  <body>
  <form action=”html_interfacekit.htm”>
  <table id=”mytable”>
       <thead>
     <tr><td>Analog Input</td></tr>
       </thead>
  <tr id=”tr0”><td>0</td> </tr>
  <tr id=”tr1”><td>0</td> </tr>
  <tr id=”tr2”><td>0</td> </tr>
  <tr id=”tr3”><td>0</td> </tr>
  <tr id=”tr4”><td>0</td> </tr>
  <tr id=”tr5”><td>0</td> </tr>
  <tr id=”tr6”><td>0</td> </tr>
  <tr id=”tr7”><td>0</td> </tr>
  </table>
  </form>
  </body>
  </html>

Before you can use the Phidget, you must include its Class ID on object creation in your code. This will let the browser know which library to try and load for the Phidget definitions. Each type of Phidget has its ClassID listed inside the ClassID_List.txt document from the VBScript examples. For example, we can declare and create a PhidgetInterfaceKit for vbscript with:

  <object classid="clsid:50484945-4745-5453-3000-000000000003" id="phid"></object>
  <script type="text/vbscript">
     <!--Your Code goes here-->
  </script>

The object name for any type of Phidget is listed in the API manual. Every type of Phidget also inherits functionality from the Phidget base class.

Follow The Examples

By following the instructions above, you probably now have a working example and want to understand it better so you can change it to do what you want. This teaching section has resources for you to learn from the examples and write your own.

Your main reference for writing VBScript code will be our .COM API information, with syntax for all of our functions:

.COM API (This is the complete set of functions you have available for all Phidgets)
Device Specific APIs - The one for your Phidget can be found in its user guide.

To learn the details behind opening, configuring, using, and closing your Phidget, try the General Phidget Programming page. That page also describes using the Phidget in an event-driven manner and in a traditional manner, both of which are available in VBScript.

Code Snippets

Specific calls in VBScript will differ in syntax from those on the General Phidget Programming page, but the concepts stay the same.

It may help to have the General Phidget Programming page and this section open at the same time, because they parallel each other and you can refer to the VBScript syntax. However, many additional concepts are covered on the General Phidget Programming page on a high level, such as using multiple Phidgets, handling errors, and different styles of programming.

Step One: Initialize and Open

The program can try to connect to the Phidget through an open call. Open will continuously try to connect to a Phidget, based on the parameters given, even trying to reconnect if it gets disconnected. This means that simply calling open does not guarantee you can use the Phidget immediately. We can account for a connection by using event driven programming and tracking the AttachEvents and DetachEvents, or by calling WaitForAttachment. WaitForAttachment will block indefinitely until a connection is made to the Phidget, or an optional timeout is exceeded.

  phid.Open()

The different parameters and open calls can be used to open the first Phidget of a type it can find, open based on a serial number, or even open across the network. The API manual lists all of the available modes that open provides. One important thing to remember is that when working with Phidgets, a local connection will reserve the device until closed. This prevents any other instances from retrieving data from the Phidget, including other programs. The one connection per device limit does not apply when exclusively using the Phidget Webservice.

Step Two: Wait for Attachment (plugging in) of the Phidget

  phid.WaitForAttachment (3000)

Step Three: Do Things with the Phidget

We recommend the use of event driven programming when working with Phidgets. In VBScript, we hook an event handler with the following code:

  Sub phid_OnSensorChange(ByVal Index, ByVal SensorValue)
     mytable.rows("str"+CStr(Index)).cells(0).innerText = Cstr(InterfaceKit1.sensorValue(Index))
  End Sub

With this method, the code inside onSensorChange will get executed every time the PhidgetInterfaceKit reports a change on one of its analog inputs.

Some events such as Attach and Detach belong to the base Phidget object and thus are common to all types of Phidgets. Please refer to the API manual for a full list of events and their usage.

Some values can be directly read and set on the Phidget, and inside polling loops used as an alternative to event driven programming. Simply use the instance properties such as phid.SensorChangeTrigger(Index) for PhidgetInterfaceKits.

  phid.SensorChangeTrigger(0) = 1

Step Four: Close and Delete

More How-To's

The General Phidget Programming page gives more information about:

Using Multiple Phidgets (or a Phidget other than the Interface Kit)
Catching exceptions and errors and using logging
Event catching versus direct polling
And more....

Common Problems and Solutions/Workarounds

None at this time.

@@ Line 18: / Line 18: @@
 {{ExampleCodeReasons}}
-Visual Basic script is only supported under [[#Windows(2000/XP/Vista/7)|Windows 2000 / XP / Vista / 7]], and then for use only under Internet Explorer.
+Visual Basic script is only supported under [[#Windows(2000/XP/Vista/7)|Windows 2000 / XP / Vista / 7]], and then for use '''only under Internet Explorer'''.
 ==Windows (2000/XP/Vista/7)==

Personal tools

Views

More

Tools