1204 User Guide

Getting Started

Checking the Contents

You should have received: A PhidgetTextLCD Adapter A mini-USB cable Mounting hardware kit		In order to test your new Phidget you will also need: An LCD An LCD cable

Connecting the Pieces

Connect your LCD to the Adapter using your LCD cable. Connect the PhidgetTextLCD Adapter to your computer using the Mini-USB cable.

Testing Using Windows 2000 / XP / Vista / 7

Make sure you have the current version of the Phidget library installed on your PC. If you don't, follow these steps:

1. Go to the Quick Downloads section on the Windows page
2. Download and run the Phidget21 Installer (32-bit, or 64-bit, depending on your system)
3. You should see the icon on the right hand corner of the Task Bar.

Running Phidgets Sample Program

Double clicking on the icon loads the Phidget Control Panel; we will use this program to ensure that your new Phidget works properly.

The source code for the TextLCD-full sample program can be found in the quick downloads section on the C# Language Page. If you'd like to see examples in other languages, you can visit our Languages page.

Updating Device Firmware

If an entry in this list is red, it means the firmware for that device is out of date. Double click on the entry to be given the option of updating the firmware. If you choose not to update the firmware, you can still run the example for that device after refusing.

LCD Display Tab Double Click on PhidgetTextLCD Adapter in the Phidget Control Panel to bring up TextLCD-full and check that the box labelled Attached contains the word True. Choose the screen. Select the screen size. Click on Initialize to set-up and clear the display. Click on the Backlight box. The screen will light up. Click on the Cursor box. A “dash” cursor will appear on the screen. Click on the Cursor Blink box. A square blinking cursor will appear on the screen. You can increase or decrease the LCD contrast by moving the pointer in the Contrast slider box. You can increase or decrease the LED Brightness by moving the pointer in the Brightness slider box. You can type your message to be displayed on the LCD screen. To make your own characters, click on the Custom Characters Tab.
Custom Characters Tab Draw your custom character. Select the memory location (you can store up to 8 characters in location 0 to 7). Select the screen. Store the custom character in the memory location. The stored values are shown in the boxes. The algorithm is described in the Technical Section of the manual. You can see your custom character by typing \0 (in the case of Memory Location 0) in one of the text boxes on the “LCD Display” tab.

Testing Using Mac OS X

1. Go to the Quick Downloads section on the Mac OS X page
2. Download and run the Phidget OS X Installer
3. Click on System Preferences >> Phidgets (under Other) to activate the Preference Pane
4. Make sure that the is properly attached.
5. Double Click on in the Phidget Preference Pane to bring up the Sample program. This program will function in a similar way as the Windows version.

Using Linux

For a step-by-step guide on getting Phidgets running on Linux, check the Linux page.

Using Windows Mobile / CE 5.0 / CE 6.0

For a step-by-step guide on getting Phidgets running on Windows CE, check the Windows CE page.

API

We document API Calls specific to this product in this section. Functions common to all Phidgets and functions not applicable to this device are not covered here. This section is deliberately generic. For calling conventions under a specific language, refer to the associated API manual in the Quick Downloads section for that language. For exact values, refer to the device specifications.

Enums

enum {

PHIDGET_TEXTLCD_SCREEN_NONE,

PHIDGET_TEXTLCD_SCREEN_1x8,

PHIDGET_TEXTLCD_SCREEN_2x8,

PHIDGET_TEXTLCD_SCREEN_1x16,

PHIDGET_TEXTLCD_SCREEN_2x16,

PHIDGET_TEXTLCD_SCREEN_4x16,

PHIDGET_TEXTLCD_SCREEN_2x20,

PHIDGET_TEXTLCD_SCREEN_4x20,

PHIDGET_TEXTLCD_SCREEN_2x24,

PHIDGET_TEXTLCD_SCREEN_1x40,

PHIDGET_TEXTLCD_SCREEN_2x40,

PHIDGET_TEXTLCD_SCREEN_4x40,

} ScreenSizes This is a list of the supported screen sizes. The 4x40 screen is a special case because it requires both of the enable lines - so when it is attached, it must be setup on screen 0, and screen 1 cannot be used.

Properties

int Screen [get,set]

Gets / sets the active screen. All other API calls depend on this being called first to select the screen that subsequent calls affect. When making calls from multiple threads, selecting the screen should be synchronized with setting screen properties in order to avoid having messages go to the wrong display.

int RowCount [get]

Returns the number of rows of text supported by the active TextLCD display. This will depend on the set screen size, and defaults to 0.

int ColumnCount [get]

Returns the number of columns of text per row supported by the active TextLCD display. This will depend on the set screen size, and defaults to 0.

int ScreenCount [get] : Constant = 2

Returns the number of screens supported by the TextLCD.

ScreenSizes ScreenSize [get,set]

Gets / sets the screen size for the active TextLCD display. The TextLCD Adapter supports a pre-defined set ofscreen sizes to choose from. By default, both screens are set to PHIDGET_TEXTLCD_SCREEN_NONE, and this function must always be called before trying to write text to a display.

bool Backlight [get,set]

Gets / sets the state of the active TextLCD display backlight. The backlight is disabled by default when the TextLCD is first plugged in.

int Brightness [get,set]

Gets / sets the brightness of the active TextLCD backlight. The default brightness is 255 (100%). The valid brightness range is 0-255 (0%-100%).

int Contrast [get,set]

Gets / sets the contrast of the active TextLCD display. The required contrast will vary greatly between different LCDs, so this will have to be set specifically for whatever LCDs are selected.

bool CursorOn [get,set]

Gets / sets the state of the cursor on the active TextLCD display. When enabled, a cursor (displayed as an underline) will be displayed on the last row written to, at the end of the written text. By default, this is disabled.

bool CursorBlink [get,set]

Gets / sets the state of the cursor blink on the active TextLCD display. When enabled, a flashing box appears on the last row written to, at the end of the written text. By default, this is disabled.

string DisplayString(int rowIndex) [set]

Displays text on the selected row of the active TextLCD display. If the string is shorter then the ColumnCount, it is padded out with spaces - thus completely clearing any previously displayed text.

char DisplayCharacter(int rowIndex, int columIndex) [set]

Displays a singled character on the specified row at the specified column index of the active TextLCD display. This will not affect any of the other characters already being displayed.

Functions

void setCustomCharacter(int index, int value1, int value2)

Sets up a custom character at the selected index on the active TextLCD display. Valid index range is 0-7 for .Net and Python and 8-15 for all other languages; this allows for 8 custom characters. These custom characters can be displayed by passing their character code (0-7) or (8-15) as part of a DisplayString. For determining the value1 and value2, see the technical section.

void initialize()

Initializes the active TextLCD display. This runs an initialization routine which sets up and clears the display. This can be used for activating a display that was plugged in after the TextLCD Adapter was attached, to clear the display after setting / changing the screen size, and to re-initialize a display if it has become corrupted (display won’t work anymore).

Product History

Date	Board Revision	Device Version	Comment
August 2011	0	100	Product Release, requires phidget21 2.1.8+