OS - Windows

On Windows, Phidgets can be either plugged directly into a USB Port or run over a network using the Webservice.

Phidgets are designed to run on Windows 2000 or newer.

Getting Started (Libraries and Drivers)

If this is your first Phidget, we highly recommend working through the Getting Started guide for your specific Phidget device. If you already have the icon in your task bar and know how to use it, then you've already followed the guide and are ready to learn more about the control panel, the Phidget Webservice, and more - all specific to Windows.

If you are already a pro, and just want the drivers:

• 32 Bit
• 64 Bit

For special cases where you want to install the Phidget libraries without the installer, please see the Advanced Uses section.

• Phidget21 Libraries (32-Bit and 64-Bit development files without an installer)
• Software License

Installing

Please ensure that your system has .NET framework 2.0 or higher. The .NET framework can be downloaded from Microsoft.

To install the libraries, follow these steps:

1. Download one of the Phidget installer for your system, depending on whether your system is 32 or 64-bit.

• 32-bit
• 64-bit

2. Open up the installer, and proceed through the wizard.

Please note that by default, the installer places the Phidget libraries in C:\Program Files\Phidgets.

3. Once the installation is complete, you are ready to program with Phidgets.

Proceed onto to the next section where the Phidget Control Panel will be discussed.

Phidget Control Panel

The Phidget Control Panel is a tool to quickly determine whether your system is able to control Phidgets, and also act as a debugging tool.

Once the Phidget libraries are installed using the installer, you should see the icon in the taskbar. Double click on it to bring up the Phidget Control Panel. If the icon does not appear, just find and open the the Phidget Control Panel from the start menu.

The general tab shows the list of Phidgets currently physically attached to the computer. You can also view the currently installed Phidget library version, as well as having the option to choose whether the Phidget Control Panel is to be started up automatically once Windows boots up. You can double click on a Phidget device to open up an example program for the device.

In the above screenshot, the RFID example was opened. These examples are intended for demonstration and debugging purposes. If you have not yet already, please see the Getting Started guide for your device. It is important to keep in mind that when an example Phidget application is opened from the Phidget Control Panel, it holds a lock on the Phidget. This prevents any other program from accessing the Phidget. Please ensure that this example application is closed(the Phidget Control Panel can still be running) when you are running your own applications. 

The next tab is the WebService tab, which allows you to control Phidgets over a network. There are four sub-tabs. The first sub-tab is the Setup tab.

Here, you can start and stop the Webservice. Details are provided in the Webservice section. You can also determine whether the Phidget Webservice is currently running. There is also a check box that you can select to turn on verbose output, which will display useful troubleshooting information for the Webservice.

The next sub-tab is the Output tab, which provides useful debugging information while you are using the Webservice. This tab will only show up if the verbose output option is selected in the previous tab.

The Dictionary sub-tab comes next; it lists all the key-value pairs that gets created when the Webservice runs. More information is provided in the Dictionary section of the General Phidget Programming page.

The Bonjour sub-tab gives a list of all currently attached Phidgets that are connected to the Webservice. This tab will only appear if you have Bonjour installed onto your system. You can also double click on the Phidget to connect to it over the network using one or more computers, and still use the Phidget on the computer it is directly connected to.

The last tab is the PhidgetSBC tab, which displays the complete list of PhidgetSBCs connected to the network. You can double click on the PhidgetSBC to bring up the PhidgetSBC Adminstration Console.

---Advanced uses of the control panel (modifying, manual installation, etc) go in the advanced section below.

Checking

To confirm the libraries were installed and work correctly, you can check both the hardware and software sides of the interface. It is worth checking the software side first, because if it works then you know the hardware side is also okay.

Software

If you have the Phidgets library installed on your system, you can verify that the software side is working by seeing if the Phidget device is listed in the General tab of the Phidget Control Panel.

The above screenshot shows that a PhidgetRFID and a PhidgetInterfaceKit are attached to the computer. If you are not able to see that the Phidget is in the list, there may be a hardware issue. Please see the hardware section for more details.

Hardware

You can verify that your computer detects that the Phidget is plugged in through a USB connection by going to the Windows Device Manager. On Windows XP, you can access the Device Manager by right clicking on My Computer, and selecting Device Manager under the Hardware tab. The Device Manager window will open.

Under the Human Interface Devices heading, you can view whether your computer detects that the Phidget is connected through the USB if it is in the list. There should be a HID-compliant device and a USB Human Interface Device entry for every Phidget that is attached to the computer. Please note that there is currently no way of directly determining which entry belongs to which Phidget. A simple way of verifying which entry belongs to which Phidget is to simply connect or disconnect the Phidget from the USB port of the computer. The list will automatically refresh to show the updated list of all connected USB devices.

If you don't see the the Phidget in the list, then take a look at the troubleshooting section below, as well as the Communications section of our general troubleshooting page.

Troubleshooting

If the examples do not work but USB does work (i.e. your computer can consistently see the device in the hardware), take a moment to check the basics:

• You are using Windows 2000 or newer.
• The Phidget Control Panel require that you have .NET framework 2.0 or newer.
• No other programs, drivers, or processes are using that USB port in software
• The Phidget libraries are the latest version (visit the getting started section to download them)
• Some drivers or software will sometimes mistakenly claim Phidget devices when waiting on some hardware to be connected. Please see the section: third party software prevents communications with Phidgets for more information.

• Check the common problems section below, some specific combinations can cause problems

If your problem doesn't seem to be fixed by these steps, make sure that the Phidget is seen consistently by USB (if it is erratic, try our general troubleshooting guide). If you are still having problems after using the troubleshooting guide, please ask us!

Programming Languages

After you have installed the drivers above, you should pick a programming language, install libraries, and run the examples for that specific language.

Phidgets’ philosophy is that you do not have to be an electrical engineer in order to do projects that use devices like sensors, motors, motor controllers, and interface boards. All you need to know is how to program.

On Windows, we recommend the following languages:

• C#
• C/C++
• Flash AS3
• Java
• LabView
• Max/MSP
• Python
• Ruby
• Visual Basic .NET
• Visual Basic 6.0

You can also use these languages, but they do not support event driven code, and must use logic code only:

• MATLAB
• Simulink

The following languages are also supported, but to to a lack of demand, they full API is not implemented. Please refer to the specific language for more information on what features are unsupported.

• Delphi
• Visual Basic for Applications
• Visual Basic Script
• LiveCode
• Adobe Director
• AutoIt

Webservice

The Phidget Webservice allows you to remotely control a Phidget over a network.

Drivers for the Phidget Webservice on Windows are already included in the Drivers above. If you have a icon in your taskbar, you already have the Webservice drivers installed.

You can connect to a Phidget hosted on another computer if you know the IP address of the host computer. Phidgets optionally supports the use of mDNS, which allows Phidgets to be found and opened on the network by a server id instead of an IP address and port. When using a server id, both the client and server will need to be running an implementation of zero configuration networking. The Phidget Webservice takes advantage Bonjour software. It is a tool, developed by Apple to locate devices such as Phidgets, and printers. It allows you to connect to a Phidget over the Webservice while specifying the server id. Alternatively, an IP address and port can be supplied to connect to a Phidget over the Webservice. If you do not have Bonjour installed on your system, you will have to use the second method to connect to a Phidget.

This section helps you install, check, and use the Webservice on Windows, but we also have an overview of the Phidget Webservice in general.

Turning the Webservice On and Off

There are two methods that can be used to turn the Webservice on and off. The first method is through the Phidget Control Panel. In the Webservice tab, you can start, restart or stop the Webservice. You can also choose to have the Webservice start up automatically upon Windows boot up by selecting Automatic as the Startup Type. By leaving the Startup Type as Manual, you will have to manually turn the Webservice on everytime you wish to use it.

The second method of turning the Webservice on and off is through command line. If you used our installer, the Webservice utility is automatically installed in C:\Program Files\Phidgets\PhidgetWebservice21.exe.

You can get command line help with PhidgetWebservice21.exe using the -h option:

 PhidgetWebservice21 -h

'phidgetwebservice21' is a Phidget and Dictionary server from Phidgets Inc. See www.phidgets.com for more information.
Usage: phidgetwebservice21 [OPTION]
All parameters are optional. The default parameters are: port=5001, ServerName=(Computer Name) and no password

Options:
  -p      Port
  -n      Server Name
  -P      Password
  -v      Debug mode
  -h      Display this help

To find the defaults used by phidget21webservice, the command line is the fastest way to learn the default server name and IP address of your computer:

• For the default server name, type hostname in the command line.
• For your IP address, type ipconfig -all in the command line.
  • A line in the return text, will say something like 192.168.2.198, which is your IP.

Here are some example usage:

To start the Webservice with default parameters:

 PhidgetWebservice21.exe

To start the Webservice with a server name of myServer:

 PhidgetWebservice21.exe -n myServer

Using the Webservice

To use a Phidget over the Webservice, you'll want to:

• Have two different computers connected to the same network. We will call the computer that has the Phidget directly connected to the USB port the host. The client will be the computer that runs a Phidget application to connect to the Phidget attached to the host. Please note that If you only have a single computer, you can also connect to the Phidget over the Webservice. The computer will simply act as both a host and client.

• Start the webservice on the computer that directly connects to the Phidget
• Run your program on the remote computer that will control the Phidget over the network

The easiest way to test these steps on Windows is download and install Bonjour onto both the host and client. Next, we will set up the Webservice and run the Phidget program on the client. Please follow these steps:

1. On the host, open up the Phidget Control Panel and traverse to the Setup tab of the WebService section.

2. Leave all fields the way it is, and click on Start to run the Webservice.

3. You can determine that the Webservice is running by looking at the WebService status at the bottom of the window.

4. Ensure that the Phidget is plugged in to the host.

5. On the client's Phidget Control Panel, open up the Bonjour tab in the Webservice section. You will see the Phidget that is plugged into the host as one of the entries listed. Double click it to open the example application.

6. The example application will open up, and you will be able to interact with the Phidget over the Webservice.

7. You can confirm that the Webservice was indeed behind this exchange by killing the Webservice process while still allowing the remote program to run. On the host's Phidget Control Panel, traverse to the Setup tab of the Webservice section. Hit Stop to terminate the Webservice.

8. Take a look at the example application on the client. Since the application can no longer connect to the Webservice, the attached state of the Phidget is false.

Debugging the Webservice

In addition to enabling logging in your Phidget code, you can get additional debugging information from the Webservice itself. This additional debugging can be enabled from the Enable verbose output checkbox in the Phidget Control Panel.

If you are using the command line approach to start the Webservice, debug information is enabled by specifying the -v option:

 PhidgetWebservice21.exe -v -n "myServer"

Advanced Uses

Manual File Installation

The Phidget installer installs the most commonly used files onto your system. However, there may be special cases where you want to install the Phidget libraries without the installers. This section will describe the purpose of each individual file and cover how to manually install and distribute the libraries with your code.

Description of Library files

• phidget21.dll contains the actual Phidget library, which is used at run-time. It is also placed in C:\Windows\System32.
• PhidgetWebService21.exe is used to control Phidgets remotely across a network using the PhidgetWebservce.
• PhidgetWindowsService21.exe is a Windows service that controls PhidgetWebService21.exe.
• phidget21.lib is used by your compiler to link to the dll. Your compiler has to know where this file is, by default our installer puts phidget21.lib into C:\Program Files\Phidgets, so you can either point your compiler to that location, or copy and link to it in a directory for your project workspace. phidget21.lib is written to be compatible with most compilers - but your specific compiler may need a different format. Check our documentation for your specific compiler for details. Please note that we provide versions of the phidget21.lib that are specifically optimized for 32-bit or 64-bit systems. If you are using a 64 bit versions of Windows, the phidget21.lib is placed in C:\Program Files\Phidgets; The 32 bit version of phidget21.lib is placed in C:\Program Files\Phidgets\x86.
• phidget21.h lists all the Phidget API function calls available to your code. Your compiler also has to know where this file is. By default, our installer puts phidget21.h into C:\Program Files\Phidgets so you can either point your compiler to that location, or copy and link to it in a directory for your project workspace.
• phidget21.jar is an archive containing the Phidgets library, used by the Java programming language.
• Phidget21.NET.dll is the Phidgets library for .NET framework 2.0 or greater. Any .NET language can be used, including C# , and Visual Basic .NET.
• Phidget21.NET1.1.dll is the Phidgets library for .NET framework 1.1. Any .NET language can be used, including C# , and Visual Basic .NET.
• Phidget21.NET.XML provides the IntelliSense in-line documentation for the .NET library in Visual Studio.
• Phidget21COM.dll is the Component Object Model(COM) library and provides your project access to the Phidget ActiveX objects. This libraries is used by the AdobeDirector, AutoIT, Delphi, Visual Basic 6.0, Visual Basic for Applications, Visual Basic Script.
• Phidget21Manager.exe is a tool to quickly determine whether your system is able to control Phidgets, and also act as a debugging tool.
• Examples folder contain example applications that allows you to quickly see if your Phidget is properly configured.
• x86 folder folder contain the 32 bit versions of phidget21.dll, phidget21.lib, Phidget21COM.dll. These folder will only appear on 64 bit installations and is useful if you want to code against the 32 bit libraries.

---also explain the extra files that are installed as part of the 64 bit installer.

Special Cases of Library Install

Regardless of what language you will be using to program Phidgets, you will need the phidget21.dll placed in the C:\WINDOWS\system32 directory. Additional files are needed for the language that you choose. Please refer to the documentation provided by your language to determine what files are needed and the steps needed to install them onto your system.

You can find the phidget21.dll in the link below:

• Phidget21 Libraries (32-Bit and 64-Bit development files without an installer)

PhidgetWebService21.exe is also provided in the link above.

Windows in a Virtual Machine

Phidgets can also be used inside a virtual machine. Instructions for VMWare and VirtualBox are provided. Virtual PC is not supported as USB Phidgets requires a virtual platform that supports HID USB Devices. Since Virtual PC does not support HID USB devices, Phidgets may not be used.

As always, please ensure that you have the latest Phidget drivers installed on the virtual machine and that you are using the latest version of your virtual software.

VMWare:

To enable USB Phidgets, select Virtual Machine -> Removable Devices -> and select the Phidget Input Device -> Connect.

VirtualBox

To enable USB Phidgets, VirtualBox Guest Additions(Devices -> Install Guest Additions) may need to be installed. Afterwards, click on Devices -> USB Devices and select the Phidget device to enable. The state should go from Busy to Captured. VirtualBox may bring up a new hardware wizard in the host operating system, which has to be installed. Please note that Phidgets with USB hubs(i.e, 1019), are undetectable; Fortunately, Phidgets that are attached to such Phidgets are detectable.

Common Problems and Solutions

This content is primarily copied from the old page. Try to put as much of this as possible into the Troubleshooting section above, or the Advanced Uses section. If you don't include all of the content, in those other sections, at least link between here and there.

Issue: Installing .NET 2.0 on Windows 2000.

Affected Operating Systems: Windows 2000

To install the Phidget Framework on Windows 2000 systems, the .NET 2.0 framework is required. Also, although not explicitly required to use Phidgets on a Windows system, Phidgets under the .NET languages can use .NET 2.0.

Solution: The Microsoft .NET Framework Version 2.0 Redistributable Package for (x86) and (x64) systems is freely available from www.microsoft.com. You will need to upgrade to at least Windows 2000 Service Pack 3 for the (x86) version.

Issue: A corrupt installation fails on uninstall or repair

Affected Operating Systems: Windows

Solution: If the normal uninstall fails, or for whatever reason, you can choose to remove the Phidgets framework manually. Please perform the following:

1. Shut down any programs using the Phidget libraries, including the webservice and the Phidget Control Panel.
2. Delete C:\Program Files\Phidgets\
3. Remove the Phidgets key from the Registry [-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services PhidgetWebservice21].

In most cases this is enough to get the installer working again. If you need to remove all traces of the Phidgets libraries manually, perform the following additional steps:

1. Unregister the COM library: regsvr32 /u “C:\Program Files\Phidgets\Phidget21COM.dll”
2. Remove Phidget21.NET and Policy.2.1.Phidget21.NET from C:\Windows\Assembly\
3. Delete ‘C:\Documents and Settings\All Users\Application Data\Phidgets’ (WindowsXP) or ‘C:\Users\All Users\Phidgets’ (Vista).
4. Delete C:\Windows\system32\phidget21.dll
5. Delete Phidgets from the start menu
6. Search for and remove keys mentioning Phidgets from the registry in the following locations:

• [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\]
• [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\]
• [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\AssemblyFolders\Phidgets Inc]
• [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\Phidget21Manager]
• [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Assemblies\Global\]

9. Reboot

NOTE: You can go through the registry and purge any other keys mentioning Phidgets if you still have problems, but at this point you should be able to reinstall under most cases. There will also be keys relating to the installer, the .NET library and the COM library, but they should not interfere with anything.

Issue: Event data is sporadic/slow/clumped over the webservice

Affected Operating Systems: Windows

Windows implements 200ms delayed ACKs for network traffic. When traffic is one-way only - as it is with event data, the data will all arrive in clumps every 200ms because of delayed ACKs.

This can be a great drawback for application which rely on low latency event data over the network. (source: http://support.microsoft.com/kb/214397)

This delayed ACK behavior can be disabled in windows to decrease event latency as documented here: http://support.microsoft.com/kb/328890

In the future, the Phidgets library may implement this differently, but so far we have been unable to match the performance achieved by disabling delayed ACK.

Issue: My system has a .NET version earlier than 2.0, and cannot run the Installer

Affected Operating Systems: Windows

For the best compatibility, it is recommended that you install the most up to date .NET version. However, if there are certain circumstances that prevent you from installing .NET 2.0 or higher, you can still control Phidgets. The drivers can be manually installed - check our Manual Installation Instructions.

The need for .NET 2.0 is because certain Phidgets features were built with .NET 2.0. Features include Phidget Control Panel, examples, and PhidgetWebService.

---