OS - iOS

iOS is a mobile OS used on iOS devices including the iPad, iPhone, and iPod touch.

Phidgets are designed to run on devices with an iOS version of 3.0 or later. It is strontly recommended that your device have the latest iOS version installed. As iOS devices do not have USB ports, the Phidgets will have to be connected on a computer with USB ports, and the iOS device will be able to interact with the Phidget over the Webservice. If you are looking for a compact and cheaper-than-a-tablet way to host Phidgets over a network, take a look at our Single Board Computer.

Getting Started (Libraries and Drivers)

If this is your first Phidget, we highly recommend working through the Getting Started guide for your specific Phidget device.

iOS code is developed on an external OS X machine, and so getting your Phidget to work locally on that platform first will help you distinguish any issues from network ones later.

If you are already a pro, and just want the drivers:

• iOS Drivers

Installing

The 'installation' of the Phidget iOS libraries is simply linking and distributing the libraries with your code. As the most common platform to do this is through Xcode, we provide brief instructions on how to easily follow along with our already-linked examples later.

To install the libraries, follow these steps:

1. Download the Phidget drivers for iOS.

2. Unzip the file, and you will find three things:

1. Libraries for the iOS device and iOS simulator
2. Example code for the PhidgetInterfaceKit and PhidgetManager
3. Skeleton project - contains the minimal project settings already filled in for Phidgets development.

Feel free to browse around within the folders to get a sense of what will be going on the iOS side. We describe how to link and use these library files later on the Write your own iOS code section of the iOS Cocoa Touch page. For now, having found them means you can copy and 'install' them to any project directory you want.

First, though, it will be useful to check to make sure Phidgets work with your iOS system.

Checking

When you run a Phidgets iOS example, you transfer and link the libraries and code all at the same time. This should 'just work' with our examples, but if problems arise this section gives more detail on pinpointing the source of the problem. We recommend starting with running the software examples right away - if the software works, you know the hardware works too.

Software

The easiest way to see whether your libraries are set up correctly within our examples or your own project is just to download them to the iOS device and run them. Detailed instructions for this (including choosing the right HelloWorld project to run) are on the Language - iOS page. That page will be your next step - but if the examples do not run using the instructions, return here to debug your hardware.

Hardware

If you are having problems running the examples, you should check the hardware of the host computer.

When using the Webservice to control a Phidget, the problem may be with the USB connection on the remote computer. Make sure both the server-side of (a) the webservice and (b) the USB connection are working by using the instructions on the OS X page

Troubleshooting

If the examples do not work but USB does work (i.e. your remote computer or iOS device can consistently see the device in the hardware), take a moment to check the basics:

• No other programs, drivers, or processes are using the the Phidget on the host computer.
• You have copied and linked the Phidget iOS libraries (as described on the Language - iOS page)
• The Phidget libraries are the latest version (visit the getting started section to download them)
• Ensure that the webservice drivers and the iOS libraries are both the latest version
• Check the common problems section below, some specific combinations can cause problems

If your problem doesn't seem to be fixed by these steps, make sure that the Phidget is seen consistently by USB in hardware (if it is erratic, try our general troubleshooting guide). If you are still having problems after using the troubleshooting guide, please ask us!

Programming Languages

iOS programs are written in Cocoa Touch and Objective C using the Phidgets library.

Webservice

The Phidget Webservice allows you to remotely control a Phidget over a network.
This section helps you use the Webservice on iOS, but we also have an overview of the Phidget Webservice in general.

Currently, iOS devices cannot host the Webservice, but they can use data streaming from another computer over the Webservice.

Setting Up the Webservice

Using an iOS device, your network-controlled Phidget system will probably look something like this:

To begin,

1. Start the Webservice on the host computer

• How to do this on Windows
• How to do this on Mac OS
• How to do this On Linux
• How to do this On the Phidget Single Board Computer

2. Download and extract the iOS Examples.

3. Open up the HelloWorld.xcodeproj into Xcode. Select either a iOS device or iOS simulator as the destination.

4. In Xcode, hit the Run button to enable to device or simulator to run the program.

Using the Webservice

After performing the steps above, you will be using the Webservice already. Plugging in the Phidget to the host computer will give you a screen like this:

The above screenshot shows that a number of Phidgets are attached to the USB ports of computer connected to the network. Go ahead and detach the Phidgets from the USB port of the computer, and see what happens.

Debugging the Webservice

As currently an iOS device can only be a user and not a host of the Webservice, you should use debugging server side. Refer to the webservice sections for each operating system:

• Windows
• Mac OS
• Linux
• Phidget Single Board Computer

In addition, if you are having webservice problems, you will probably find the webservice section of our General Troubleshooting Guide helpful as well.

Advanced Uses

Description of Library files

• iphoneos/libPhidget21.a contains the actual Phidget library, which is used at run-time. This library is used when you are testing the example on the actual iOS device.
• iphonesimulator/libPhidget21.a contains the actual Phidget library, which is used at run-time. This library is used when you are testing the example an iOS simulator.
• phidget21.h lists all the Phidget API function calls available to your code. Your compiler also has to know where this file is.
• SkeletonProject is a Xcode project containing the bare minimum project settings already filled in to code with the Phidget library.