Notice: This page contains information for the legacy Phidget21 Library. Phidget21 is out of support. Bugfixes may be considered on a case by case basis. Phidget21 does not support VINT Phidgets, or new USB Phidgets released after 2020. We maintain a selection of legacy devices for sale that are supported in Phidget21. We recommend that new projects be developed against the Phidget22 Library.
|
All public logs
Combined display of all available logs of Phidgets Legacy Support. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 20:18, 15 February 2012 Fitchett talk contribs deleted page === New Product Announcement === (content was: ";NEW - PhidgetAccelerometer 3 Axis +-3G The Accelerometer module provides vibration, tilt, and acceleration sensing. The module is calibrated at the ..." (and the only contributor was "192.168.2.163"))
- 20:11, 15 February 2012 Fitchett talk contribs deleted page 888 Jumping Bug (content was: "*Who reporting Problem & Date Dan, ~Sept 7 2007 *Description of Problem A sensor input with a large value will affect the neighbour inputs, and every ~6 seconds a spike in values will occur *Initial Proposed Solution unknown *Proposed...")
- 20:09, 15 February 2012 Fitchett talk contribs deleted page 3D Accelerometer (content was: "Phidgets Inc. has released the PhidgetAccelerometer 3 Axis +-3G. The Accelerometer module provides vibration, tilt, and acceleration sensing. The mod..." (and the only contributor was "192.168.2.163"))
- 20:09, 15 February 2012 Fitchett talk contribs deleted page 1045 (content was: "Back to Internal EMC Testing Status =1045 Internal EMC Testing Status= ==1045_0== ===Emissions Scans=== * There are major emissions emanating from the 1045 when the cables were measured * <span style = "color:green"> PASS JUN/17/10...")
- 20:09, 15 February 2012 Fitchett talk contribs deleted page 1014 (content was: "Back to Internal EMC Testing Status =1014 Internal EMC Testing Status= ==1014_2== ===Emissions Scans=== ===ESD=== * ESD has no adverse effects on the behaviour or functionality of the 1014. * Consecutive hits were applied t...")
- 20:09, 15 February 2012 Fitchett talk contribs deleted page 1002 0EMC (content was: "Back to Internal EMC Testing Status =1002 Internal EMC Testing Status= ===Emission Scans=== * <span style="color:green"></span> ===ESD=== * Th..." (and the only contributor was "192.168.3.110"))
- 20:08, 15 February 2012 Fitchett talk contribs deleted page TJ 1047 (content was: "Back to PhidgetTesting Overhaul ===Tentative Changes=== *Put steering diodes on Digital Outputs between GTI and Test Adapter. *Add USB steering di..." (and the only contributor was "192.168.2.168"))
- 20:08, 15 February 2012 Fitchett talk contribs deleted page 1017 1-EMC (content was: "Back to Internal EMC Testing Status =1017 Internal EMC Testing Status= ===Emission Scans=== * <span style="color:green"></span> ===ESD=== * <span style="color:r..." (and the only contributor was "Leo"))
- 20:08, 15 February 2012 Fitchett talk contribs deleted page 1203 2Status (content was: ";<u>Current status of the product:</u> * China is building pilot runs. * Final acceptance test signoff will be delayed for quite a while until voltage references are available. ==Product Log==")
- 20:08, 15 February 2012 Fitchett talk contribs deleted page JTAGStatus (content was: ";<u>Current status of the product:</u> * Waiting on business decision to go. * Design is done - need a gold board review and acceptance testing.")
- 20:07, 15 February 2012 Fitchett talk contribs deleted page Steppers (content was: "====Product Manual==== Located in Engineering/Prototypes/ACC_StepMotor/Stepper_Product_Manual.doc *Intro to Steppers *Controlling the Stepper *Selecting a Gearbox *Glos..." (and the only contributor was "Erik"))
- 20:07, 15 February 2012 Fitchett talk contribs deleted page 1047 0Status (content was: ";<u>Current status of the product:</u> * Routing on Channel 0 is poor - it picks up processor noise. Not high priority, but could be redesigned. Would likely pass as-is.")
- 20:07, 15 February 2012 Fitchett talk contribs deleted page 3051 0 Functional Specs (content was: ";Output Contact Resistance: .1 ohm ;Max. Switching Voltage: 205 V (AC), 100V (DC) ;Max. Switching Current:10 A (AC), 5 A (DC) ;Max. Switching Speed: 2..." (and the only contributor was "192.168.2.163"))
- 20:07, 15 February 2012 Fitchett talk contribs deleted page 1045 0Status (content was: ";<u>Current status of the product:</u> * Gold board is very quiet - needs acceptance tests, and then we can CE Test it. * Low priority. * September 07/10 - Gold Board")
- 20:07, 15 February 2012 Fitchett talk contribs deleted page 1010 0Status (content was: ";<u>Current status of the product:</u> *Board has been built. Waiting for testjig *Rob has built a baseboard, similar to how customers would use it. * Low priority.")
- 20:07, 15 February 2012 Fitchett talk contribs deleted page 1012 2Status (content was: ";<u>Current status of the product:</u> * The current 1012_2 is being built up and tested. If it is okay, we'll run with this design. * September 07/10 - Gold Board")
- 20:06, 15 February 2012 Fitchett talk contribs deleted page TJ 1046 (content was: "Back to PhidgetTesting Overhaul ===Tentative Changes=== *Add USB steering diodes *Isolate ground for each bridge. * Hook Analog Outputs up to Anal..." (and the only contributor was "192.168.2.168"))
- 20:06, 15 February 2012 Fitchett talk contribs deleted page 1040 0Status (content was: ";<u>Current status of the product:</u> * Erik has redesigned to reduce processor noise. Current version would likely pass. * September 07/10 - Gold Board")
- 20:06, 15 February 2012 Fitchett talk contribs deleted page 1120 0Status (content was: ";<u>Current status of the product:</u> * 1120 is in pilot run right now. * We may have to issue an ECN for adding the silicon pads to the packaging.")
- 20:06, 15 February 2012 Fitchett talk contribs deleted page 1131 0Status (content was: ";<u>Current status of the product:</u> * 1131 is in prototyping. * We may have to issue an ECN for adding the silicon pads to the packaging.")
- 20:06, 15 February 2012 Fitchett talk contribs deleted page TJ 1061 (content was: "Back to PhidgetTesting Overhaul ===Tentative Changes=== *Add steering on SERVOSNS *Add USB steering diodes *Better protection for PICs" (and the only contributor was "192.168.2.168"))
- 20:06, 15 February 2012 Fitchett talk contribs deleted page 1019 (content was: "Back to Internal EMC Testing Status =1019 Internal EMC Testing Status= ==1019_1== ===Radiated Emissions=== ===ESD=== ----" (and the only contributor was "192.168.3.110"))
- 20:06, 15 February 2012 Fitchett talk contribs deleted page 1011 1-EMC (content was: "=1011 Internal EMC Testing Status= Back to Internal EMC Testing Status ---- ==1011== ===Emissions Scans=== ===ESD=== ----")
- 20:05, 15 February 2012 Fitchett talk contribs deleted page TJ 1051 (content was: "Back to PhidgetTesting Overhaul ===Tentative Changes=== *Steer VOUT to VCCi5V, IGND. *Add USB steering diodes *Upgrade Connector" (and the only contributor was "192.168.2.168"))
- 20:05, 15 February 2012 Fitchett talk contribs deleted page 1011 0Status (content was: ";<u>Current status of the product:</u> * Patrick is changing firmware to use the 10-bit ADC rather than the 12-bit ADC.")
- 20:05, 15 February 2012 Fitchett talk contribs deleted page 1046 0Status (content was: ";<u>Current status of the product:</u> * What are the CE Conclusions from this product? * September 07/10 - Gold Board")
- 20:04, 15 February 2012 Fitchett talk contribs deleted page 1049 0Status (content was: ";<u>What CAN been done?(refer to above tasks)</u> * Very quiet for CE. Not anticipating any problems.")
- 20:04, 15 February 2012 Fitchett talk contribs deleted page 1065 0Status (content was: ";<u>Current status of the product:</u> * 1065 was re-ordered due to a couple of hardware changes.")
- 20:04, 15 February 2012 Fitchett talk contribs deleted page 3060 0Status (content was: ";<u>Current status of the product:</u> * Fraser has redesigned - should be put on order.")
- 20:04, 15 February 2012 Fitchett talk contribs deleted page 1204 0Status (content was: ";<u>Current status of the product:</u> * Fraser has just attempted a gold board design.")
- 20:04, 15 February 2012 Fitchett talk contribs deleted page Take Production away from Chester (content was: "*Documenting use of forecasting tools (Bernard) *Process for transferring product data to Production from Engineering *Need centralized database for components, vendors.(Randy) *80% done at this point *[Link to another file]")
- 20:03, 15 February 2012 Fitchett talk contribs deleted page PhidgetIFKit 12-BitTechnical (content was: "''Back to '' PhidgetIFKit 12-Bit == Design == * Need both +12V and -12V rail for ADC. (or +/-10V rails in the least) ** Use FAN5331 layout, as shown in schematic fo..." (and the only contributor was "Erik"))
- 20:03, 15 February 2012 Fitchett talk contribs deleted page Figure out why SetReport does not recover (content was: "*For some reason, bus resets are sometimes locked up, possibly by our library. *A good test case is to use a USB extender cable with the custom USB cable" (and the only contributor was "192.168.2.163"))
- 20:03, 15 February 2012 Fitchett talk contribs deleted page Broaden variety of tags offered with PhidgetRFID kit (content was: "*Compare to tags offered by Trossen Robotics *Need a more reliable supplier scope: identify tags sold by Trossen - where to buy and what else available")
- 20:02, 15 February 2012 Fitchett talk contribs deleted page Review OEM Contract (content was: "*Prompted by people calling for OEM pricing (deeper discount) *Needs more clarification as to what a Phidget OEM is." (and the only contributor was "192.168.2.163"))
- 20:02, 15 February 2012 Fitchett talk contribs deleted page Internal CE Testing Status (content was: "Product Testing Status :1012 InterfaceKit 0/16/16 :1014 InterfaceKit 0/0/4 :1045 Thermometer IR :1046 Bridge" (and the only contributor was "Leo"))
- 20:02, 15 February 2012 Fitchett talk contribs deleted page ExpressOrder/OrderBuilder Mods (content was: "Go Back to Contents: Testbox Changelog === June 15 2010 === * Go Back to Contents: Testbox Changelog" (and the only contributor was "192.168.2.160"))
- 20:02, 15 February 2012 Fitchett talk contribs deleted page 1051 2Status (content was: ";<u>Current status of the product:</u> * What are the internal EMC testing results?")
- 20:02, 15 February 2012 Fitchett talk contribs deleted page General Troubleshooting Primer (content was: "{{AlertBox|Moved to General Troubleshooting|Primers are hardware pages?}}" (and the only contributor was "192.168.2.198"))
- 20:01, 15 February 2012 Fitchett talk contribs deleted page 1070 0Status (content was: ";<u>Current status of the product:</u> * The second production run is in progress. * 1070 test fixture has been shipped back.")
- 20:01, 15 February 2012 Fitchett talk contribs deleted page Testing Status (content was: "Product Testing Status :1012 InterfaceKit 0/16/16 :1014 InterfaceKit 0/0/4 :1045 Thermometer IR :1046 Bridge" (and the only contributor was "192.168.3.110"))
- 20:01, 15 February 2012 Fitchett talk contribs deleted page PhidgetIFKit 12-BitStatus (content was: "''Back to'' PhidgetIFKit 12-Bit ==Status== * First prototype has been designed. Board has yet to be spun." (and the only contributor was "Erik"))
- 20:01, 15 February 2012 Fitchett talk contribs deleted page ExternalFETMotorControllerStatus (content was: ";<u>Current status of the product:</u> *Prototype has been built, and firmware has been written.")
- 20:01, 15 February 2012 Fitchett talk contribs deleted page Phidget Programming (content was: "This page has merged with Software Overview and so this page should be deleted." (and the only contributor was "Cora"))
- 20:00, 15 February 2012 Fitchett talk contribs deleted page PhidgetIFKit 16-BitStatus (content was: "''Back to ''PhidgetIFKit 16-Bit ==Status== * First prototype board has been designed. Has yet to be spun." (and the only contributor was "Erik"))
- 20:00, 15 February 2012 Fitchett talk contribs deleted page How to Fax (content was: "* Put in the paper. * Dial the number, without picking up the phone. * Press Start. * Revel in your success experience." (and the only contributor was "192.168.2.150"))
- 20:00, 15 February 2012 Fitchett talk contribs deleted page TJ 1023 (content was: "Back to PhidgetTesting Overhaul ===Tentative Changes=== *Add zeners to Digital Inputs *Add USB steering diodes" (and the only contributor was "192.168.2.168"))
- 20:00, 15 February 2012 Fitchett talk contribs deleted page Controlling Mains Voltage (content was: "Switching Mains Voltage is not to be taken lightly. =Using Mechanical Relays= =Using Solid State Relays=" (and the only contributor was "192.168.2.171"))
- 20:00, 15 February 2012 Fitchett talk contribs deleted page 1056 0Status (content was: ";<u>Current status of the product:</u> * No problem with internal EMC Testing.")
- 20:00, 15 February 2012 Fitchett talk contribs deleted page 1055 0Status (content was: ";<u>Current status of the product:</u> * No problems with internal CE Testing.")