Language - Flash AS3

Flash, developed by Adobe is used to build dynamic multimedia applications to web pages.

Introduction

If this is your first time working with a Phidget, we suggest starting with the Getting Started page for your specific device. This can be found in the user guide for your device. That page will walk you through installing drivers and libraries for your operating system, and will then bring you back here to use Flash ActionScript specifically.

Flash ActionScript is capable of using Phidgets only over the PhidgetWebService and has support for the complete Phidget API, including events.. We also provide example code in Flash ActionScript for all Phidget devices.

Flash ActionScript can be developed with Windows and Mac OS X.

The library interacts with Phidgets through the use of web sockets.

Only ActionScript 3 is supported.

You can compare Flash ActionScript with our other supported languages.

Quick Downloads

Just need the Flash ActionScript documentation, drivers, libraries, and examples? Here they are:

Documentation

• ActionScript API Manual

Example Code

• Example Code {{{2}}}

Library and Example Code

• Example Code

Libraries and Drivers

• 32-bit Windows Drivers Installer
• 64-bit Windows Drivers Installer
• Windows Driver and Library Files (Zipped)
• OS X Drivers Installer

Getting started with Flash ActionScript

If you are new to writing code for Phidgets, we recommend starting by running, then modifying existing examples. This will allow you to:

• Make sure your libraries are properly linked
• Go from source code to a test application as quickly as possible
• Ensure your Phidget is hooked up properly

Instructions are divided up by operating system. Choose:

• Windows 2000 / XP / Vista / 7
• Mac OS X
• Linux (including PhidgetSBC)

Windows(2000/XP/Vista/7)

Description of Library

Flash ActionScript programs on Windows depend on the following files and folders. The installers in the Quick Downloads section put only the phidget21.dll into your system. You will need to manually put the com folder onto your system.

• phidget21.dll contains the actual Phidget library, which is used at run-time. By default, it is placed in C:\Windows\System32.
• com folder is the Phidget ActionScript library. It is to be placed in the same directory as your project root.

If you do not want to use our installer, you can download the phidget21.dll and manually install them where you want; refer to our Manual Installation Instructions.

Flash Professional

Use Our Examples

As the Flash ActionScript library only supports communication with Phidgets through the PhidgetWebService, begin by starting the PhidgetWebService with the default port(5001).

To run the examples, you download the examples and unpack them into a folder. Here, you will find example programs for all devices. If you aren't sure what the software example for your device is called, check the software object listed in the Getting Started Guide for your Device.

After you have found your example, open the .fla file in the Adobe Professional Flash environment. The only thing left to do is to run the examples! Click on Control → Test Movie.

Once you have the Flash ActionScript examples running, we have a teaching section below to help you follow them.

You may also run the examples by navigating to Control → Test Scene. If you are running the examples with Debug → Debug Movie, you will have to change the Flash Global Security Settings in order for the example to run. More information will be provided about the Flash Global Security Settings in the Write Your Own Code section.

Write Your Own Code

When you are building a project from scratch, or adding Phidget function calls to an existing project, you'll need to configure your development environment to properly link the Phidget ActionScript library. To begin:

1. Generate a new ActionScript 3 Flash file.

2. Then, in your code, you will need to include the Phidget ActionScript library. Navigate to Window → Actions to bring up the Actions window and enter in the following

import com.phidgets.*;
import com.phidgets.events.*;

The project now has access to the Phidget function calls and you are ready to begin coding.

The same teaching section which describes the examples also has further resources for programming your Phidget.

Running Compiled Code

Running a compiled .swf application will prompt the Flash player display a dialog box mentioning that the application will block all communications with the Internet.

Click on the Settings button to bring up the Flash Global Security Settings Manager in your default web browser. You can also access the manager with the following URL: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.html.

In the Global Security Settings tab, navigate to Edit locations ... → Add locations

Then, browse and add the application or the folder containing the application.

This will allow the Flash Player to accept any Internet communication with the application.

Mac OS X

C/C++ has excellent support on Mac OS X through the gcc compiler.

The first step in using C/C++ on Mac is to install the Phidget C/C++ library. Compile and install them as explained on the getting started guide for your device. Then, the OS - Mac OS X page also describes the different Phidget files, their installed locations, and their roles.

The information we say that we say on the OS - Mac OS X page (i.e. the different files, locations, and roles) should actually be added there

Use Our Examples

After installing the Phidget C/C++ library for Mac OS X as above, you're ready to download the examples. Afterwards, unzip the file. To run the example code, you'll need to find the source code for your specific device. Then, compile the code under your platform and run it.

The examples assume that the compiled libraries have been set up properly. To set them up on Mac OS X, follow the Getting Started page for your specific device

To compile, link the Phidget C/c++ library, and build an executable binary on Mac OS X, do (for example, depending on the Headers location):

  gcc example.c -o example -framework Phidget21 -I/Library/Frameworks/Phidget21.framework/Headers

After using gcc, you will have an executable named example that you can run.

Write Your Own Code

When writing your code from scratch, you must include a reference to the library header:

  #include <phidget21.h>

Then, you would compile your completed C/C++ code the same way as shown in the Use Our Example section above.

To learn how to write your own code for your Phidget, and to learn more about our API, we have a teaching section to help you follow the provided C/C++ examples. Even more help and references are provided from there.

Follow the Examples

By following the instructions for your operating system and compiler above, you probably now have a working example and want to understand it better so you can change it to do what you want. This teaching section has resources for you to learn from the examples and write your own.

Next comes our ActionScript API information, with syntax for all of our functions:

• ActionScript API (This is the complete set of functions you have available for all Phidgets)
• Device Specific APIs - The one for your Phidget can be found in its user guide.

To learn the details behind opening, configuring, using, and closing your Phidget, try the General Phidget Programming page. That page also describes using the Phidget in an event-driven manner and in a traditional manner, both of which are available in C/C++.

Example Flow

The Hello World example has this general structure so you can follow along. We also have an in-depth general introduction to writing Phidget code (like open, read data, etc), as well as the {{{3}}} for specific syntax:

// ----- Event and Other Functions ----- Create any Language-Specific Functions (exception handling) Create General Attach, Detach, and Error Handling Functions: On attach: Print Hello Message On detach: Print Goodbye Message		In flash ActionScript, you can name these event functions whatever you like. You will then pass them as function pointers to the Phidget library below in the Main Code section. This hooks them into the actual events when they occur. In the example code, the event functions common to all Phidgets are called things like AttachHandler() and DetachHandler(), etc. Some event functions will be specific to each device, like when a tag is read on an RFID board, or when a sensor value changes on an Interface Kit. Other functions are given in the examples to show you more detail on using your Phidget. For example, DeviceInitialize() will show what needs to be set up for your Phidget before using it.
// ----- Main Code ----- Create Manager Software Object Hook Event Functions created above to Device Open Device Wait for 'Enter' key character input Handle on-going attach and detach events Print Hello and Goodbye messages Exit upon input Close Device Delete Device		Creating a Phidget software object in Flash ActionScript is specific to the Phidget. For a Phidget Spatial, for example, this would involve creating a PhidgetSpatial object. The examples show how to do this and other API functions.

Code Snippets

a single Phidget to be opened by multiple applications - something that cannot be done with the regular interface

Common Problems and Solutions/Workarounds

Problem: My compiled application is experiencing the following security error upon launching: "SecurityError: Error #2010: Local-with-filesystem SWF files are not permitted to use sockets".

Solution: Please see Running Compiled Code section for steps in resolving this issue.