My SBC3 stopped connecting wirelessly to my home wifi. I ended up doing a hard reset and now I cannot get the system updated correctly.
I cannot install Java. When I use the web interface to install Java the web interface says the install happened, but Java is not installed. Before trying to install Java I did the following.
I edited the file: /etc/apt/sources.list.d/multistrap-debian.list to contain:
deb http://archive.debian.org/debian wheezy main contrib non-free
then ran apt-get update. I have the sbc3 connected via ethernet cable to a Win11 computer. Lots of files were not found.
Then I tried using web interface with System/Packages and Upgrade All Packages. Below are the errors I get:
The Forum interface will not get me post so many URLs, so I will replace http://www.phidgets.com with ***
Get:1 ***/debian/ wheezy/main busybox-phidgets armel 1:1.17.1-9 [300 kB]
Get:2 ***/debian/ wheezy/main phidgetwebservice armel 99:2.1.9.20250324-1 [55.8 kB]
Get:3 ***/debian/ wheezy/main libphidget21-0 armel 99:2.1.9.20250324-1 [270 kB]
Get:4 ***/debian/ wheezy/main libphidget22 armel 99:1.22.20250324-1 [677 kB]
Err ***/debian/ wheezy/main libphidget22 armel 99:1.22.20250324-1
Could not connect to www.phidgets.com:80 (206.251.255.126). - connect (113: No route to host)
Err ***/debian/ wheezy/main libphidget22extra armel 99:1.22.20250324-1
Unable to connect to www.phidgets.com:http:
Err ***/debian/ wheezy/main phidget22admin armel 99:1.22.20250324-1
Unable to connect to www.phidgets.com:http:
Err ***/debian/ wheezy/main phidgetconf armel 99:1.22.20250324-1
Unable to connect to www.phidgets.com:http:
Err ***/debian/ wheezy/main mjpg-streamer armel 167-2
Unable to connect to www.phidgets.com:http:
Err ***/debian/ wheezy/main phidgetsbcwebif armel 2.3.3-1
Unable to connect to www.phidgets.com:http:
What should I try next to get the SBC3 working again?
If I can get the upgrade to work and can install Java JRE, how do I update to Phidget22, from 21? I believe there is a firmware update I saw. How do I do this? I followed on-line directions to install but that failed.
Doug