Purchased a TMP1101_0 (4 Thermocouple) and a HUB0000_0 Hub. They seem to be working together just fine. However, I didn't pay close attention and the TMP4106_0 thermocouple that I ordered came with spade connectors on the ends and not bare wire. I wasn't sure if cutting the spade connectors off and using the bare wire or using standard wire that I have around the house may be a viable option to create a "jumper" to the TMpP1101_0 before I cut off the ends.
We expect most customers will snip off the connectors and use the bare wire. Do not use ordinary wire; creating additional junctions in a thermocouple can change the voltage differential and interfere with your readings unless you specifically use thermocouple extension wire and connectors.
