Issue with GPS.DateAndTime
Posted: Mon May 21, 2018 8:52 pm
Hi, I'm using a 1040_0 GPS device and Phidget22.NET.dll.
Just updated the code from Phidget21, and now the GPS.DateAndTime function fails. Everything else works 100% perfect, device is initialised and fixed and returning our correct location on the map, but even a call as simple as:
will throw an exception with the message stating that the date-time is not in the correct format or similar (will update with exact exception message if needed).
This worked fine in Phidget21 and the p21 and p22 GPS.GPSDateAndTime and GPS.DateAndTime (respectively) are functionally identical at the wrapper level, this must be lower level I assume?
For further reference the date and time string is being displayed in the Phidget22 manager fine, so this confirms the device is working.
Just updated the code from Phidget21, and now the GPS.DateAndTime function fails. Everything else works 100% perfect, device is initialised and fixed and returning our correct location on the map, but even a call as simple as:
Code: Select all
Dim someVar As DateTime = myOpenedGPSObject.DateAndTime()This worked fine in Phidget21 and the p21 and p22 GPS.GPSDateAndTime and GPS.DateAndTime (respectively) are functionally identical at the wrapper level, this must be lower level I assume?
For further reference the date and time string is being displayed in the Phidget22 manager fine, so this confirms the device is working.