Phidgets Forums

Posted: **Tue Jun 26, 2018 8:12 am**

Hello,

i'd like to know how to read voltage on a 1046 bridge on every channel.

Actualy, i can read 1 channel... on the phidget21, it was ok, but with the new version, ....

If you have a exemple, it'll be top.

Thanks

Tando

Posted: **Tue Jun 26, 2018 8:36 am**

In Phidget22, you need to make a new VoltageRatio object for each channel. Before you call "open" on the object, be sure to set the channel. It would look something like this:

Code: Select all

VoltageRatioInput ch1;
VoltageRatioInput ch2;

ch1 = new VoltageRatioInput();
ch2 = new VoltageRatioInput();

ch1.Channel = 0;
ch2.Channel = 1;

ch1.Open();
ch2.Open();

Posted: **Tue Jun 26, 2018 9:42 am**

Thanks, i'll try and tell you if it's ok.

Posted: **Thu Jun 28, 2018 12:13 am**

I've a problem to attach the phidget….

Posted: **Thu Jun 28, 2018 6:44 am**

solved,

Thanks

Phidgets Forums

Channel on 1046 bridge

Channel on 1046 bridge

Re: Channel on 1046 bridge

Re: Channel on 1046 bridge

Re: Channel on 1046 bridge

Re: Channel on 1046 bridge