Phidget Interface issue
Posted: Wed Jul 18, 2018 3:12 am
Hi all,
I have a Phidget Interface Kit 0/16/16 which has 2 photo-electric sensors connected to it. Everything was working fine for a while but suddenly there seems to be an issue with both sensors communicating with the board. When I open the Phidget Control Panel I see the board and the list of digital inputs. When I click on a digital input I see the following message:
Does anyone have any idea what the issue could be?
The PC/Phidget/USB cable/sensors have not been altered since it was running so it seems odd that it would just stop working.
I have a Phidget Interface Kit 0/16/16 which has 2 photo-electric sensors connected to it. Everything was working fine for a while but suddenly there seems to be an issue with both sensors communicating with the board. When I open the Phidget Control Panel I see the board and the list of digital inputs. When I click on a digital input I see the following message:
The LEDs on the board still light up when the sensors are triggered so it's obviously getting a signal in but the digital input port does not seem to recognise that the sensor is connected.Phidget Info
Attached: Nothing
Does anyone have any idea what the issue could be?
The PC/Phidget/USB cable/sensors have not been altered since it was running so it seems odd that it would just stop working.