PhidgetLED-64 Advanced wiring

[Metall4You]

Hello

I have the following Question about the wiring with only one Ground Cabel for the LED's. See my Picture... I use the Software Prosim737.

How can wiring them correctly?

Any Idee?

Kind Regards

Ramon

[fitchett]

All of the 'Anode' Pins (selectable 1.7 to 5.0 volts) are wired together on the LED64. This is the Red Wire.

The current is controlled on the cathode side of the LED; the black wire. So, you can't connect all the 'grounds' together in your project; but you can connect all the +5V together. We control the LED through the 'ground'.

[Metall4You]

Many thanks, works great...

Kind Regards Rmon