Page 1 of 2
servos becoming unattached after period of inactivity
Posted: Wed Aug 28, 2019 9:00 am
by SecularSurfer
I apologize in advance, I am fairly new to phidgets. I inherited maintenance duty on a large interactive game that has a random, but persistent bug. It uses 30 various phidgets connected to an SBC running a jetty server (Java). There is also a Raspberry Pi attached to a touch screen that starts the game.
There is an RCC1000_0 that has 3 servos attached to it. After sitting for a period of time (sometimes as short as 30 minutes or as long as 5 hours), they will return a NOT_ATTACHED code.
Everything works fine when the system is first booted up. It continues to work fine when it is used regularly (i.e every 15-20 minutes. A game lasts 5 minutes.) When it fails, all of the other phidgets continue to work as intended, but the the servos will not work again until the game is rebooted.
I appreciate any input or suggestions. I've been working on this for weeks and it's driving me mad.
Re: servos becoming unattached after period of inactivity
Posted: Wed Aug 28, 2019 3:20 pm
by Patrick
Can you enable library logging in your code, and post the result?
-Patrick
Re: servos becoming unattached after period of inactivity
Posted: Thu Aug 29, 2019 12:58 pm
by SecularSurfer
Here is the log file. Thanks in advance.
Re: servos becoming unattached after period of inactivity
Posted: Fri Aug 30, 2019 9:19 am
by SecularSurfer
Here is an updated log file from this morning.
The game worked worked fine, except for the servos not moving.
Re: servos becoming unattached after period of inactivity
Posted: Fri Aug 30, 2019 9:46 am
by Patrick
First step would be to upgrade the libraries on you SBC. You can do this from the web interface.
Also, I'd like you to upgrade the firmware on your VINT hubs. This needs to be done from the control panel on a mac or windows PC. You can upgrade the firmware over the network if the SBC is running the network server, or plug the USB hubs into your PC to do it.
The libraries/firmware from 1.4.20190828 should address your issue, but let me know if you are still having problems.
I'd also like to see the /var/log/syslog for any usb related errors.
-Patrick
Re: servos becoming unattached after period of inactivity
Posted: Fri Aug 30, 2019 10:15 am
by SecularSurfer
Thanks! The SBC isn't connected to the internet so I never got notified of any updates.
I upgraded all of the Phidget packages. Do I need to (or should I) upgrade the Debian packages as well?
Here are the two most recent syslogs. Let me know if you want further back.
Re: servos becoming unattached after period of inactivity
Posted: Fri Aug 30, 2019 11:37 am
by Patrick
Hi,
Not seeing anything too worrisome in the logs. The USB detaches should be solved by the new HUB0000 firmware and library update.
Debian package upgrades are up to you.
If you see trouble after updating, I would like to know.
-Patrick
Re: servos becoming unattached after period of inactivity
Posted: Fri Aug 30, 2019 11:46 am
by SecularSurfer
There have been a few errors in the log since the update, but (so far, at least) the game has been working fine.
Some of the USB cables are too short and use extensions, and most appear to be low quality. I already ordered some appropriate length quality cables to replace them.
I will definitely let you know if I run into any more problems. Thanks again for your help!
Code: Select all
****************************** Logging Enabled ******************************
* Phidget22 - Version 1.4 - Built Aug 28 2019 21:33:55 *
*******************************************************************************
2019-08-30T12:17:43 <Info> phidget22[populateAttachedSPIDevices()] : Found SPI VINT Hub: 0x0001, 102, 512534
2019-08-30T12:17:43 <Info> phidget22usb[PhidgetUSBScanDevices()] : Initializing libusb
2019-08-30T12:17:43 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/5
2019-08-30T12:17:43 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/4
2019-08-30T12:17:43 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/3
2019-08-30T12:17:43 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 3/2
2019-08-30T12:17:43 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 5/2
2019-08-30T12:17:43 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:17:43 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): USB read thread started: 0xa84ff470
2019-08-30T12:17:43 <Info> phidget22[HandleEventsThreadFunction()] : Increased priority of USB Handle Events thread to: 32
2019-08-30T12:17:46 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:17:46 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538802): USB read thread started: 0xa80ff470
2019-08-30T12:17:50 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:17:50 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538827): USB read thread started: 0xa7cff470
2019-08-30T12:17:52 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:17:52 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538815): USB read thread started: 0xa78ff470
2019-08-30T12:17:53 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:17:53 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538364): USB read thread started: 0xa74ff470
2019-08-30T12:17:53 <Info> phidget22[PhidgetHubDevice_dataInput()] : Ignoring a hub channel detach message recieved during hub initialization.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:27:44 <Info> phidget22usb[PhidgetUSBGetString()] : libusb_get_string_descriptor_ascii() failed: LIBUSB_ERROR_IO - Input/Output Error. Maybe detaching?
2019-08-30T12:27:44 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 5 times
2019-08-30T12:27:44 <Info> phidget22usb[PhidgetUSBGetString()] : Device was unplugged - detach.
2019-08-30T12:27:44 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:27:44 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 7 times
2019-08-30T12:27:44 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): ReadThread exiting normally
2019-08-30T12:27:45 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/6
2019-08-30T12:27:45 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:27:45 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): USB read thread started: 0xa84ff470
2019-08-30T12:37:23 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:37:23 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:37:23 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:37:23 <Info> phidget22usb[PhidgetUSBGetString()] : libusb_get_string_descriptor_ascii() failed: LIBUSB_ERROR_IO - Input/Output Error. Maybe detaching?
2019-08-30T12:37:23 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T12:37:23 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:37:23 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 7 times
2019-08-30T12:37:23 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538815): ReadThread exiting normally
2019-08-30T12:37:24 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/7
2019-08-30T12:37:24 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:37:24 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538815): USB read thread started: 0xa78ff470
2019-08-30T12:53:27 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:53:27 <Info> phidget22usb[PhidgetUSBGetString()] : libusb_get_string_descriptor_ascii() failed: LIBUSB_ERROR_IO - Input/Output Error. Maybe detaching?
2019-08-30T12:53:27 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T12:53:27 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:53:27 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:53:27 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T12:53:28 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 5 times
2019-08-30T12:53:28 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538802): ReadThread exiting normally
2019-08-30T12:53:28 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/8
2019-08-30T12:53:28 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T12:53:28 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538802): USB read thread started: 0xa80ff470
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:09:18 <Info> phidget22usb[PhidgetUSBGetString()] : libusb_get_string_descriptor_ascii() failed: LIBUSB_ERROR_IO - Input/Output Error. Maybe detaching?
2019-08-30T13:09:18 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 5 times
2019-08-30T13:09:18 <Info> phidget22usb[PhidgetUSBGetString()] : Device was unplugged - detach.
2019-08-30T13:09:18 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:09:18 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 5 times
2019-08-30T13:09:18 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): ReadThread exiting normally
2019-08-30T13:09:19 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/9
2019-08-30T13:09:19 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T13:09:19 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): USB read thread started: 0xa84ff470
2019-08-30T13:13:39 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:13:39 <Info> phidget22usb[PhidgetUSBGetString()] : libusb_get_string_descriptor_ascii() failed: LIBUSB_ERROR_IO - Input/Output Error. Maybe detaching?
2019-08-30T13:13:39 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T13:13:39 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:13:39 <Info> phidget22usb[PhidgetUSBReadPacket()] : Device was unplugged - detach.
2019-08-30T13:13:39 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): ReadThread exiting normally (Phidget detach detected in PhidgetDevice_read)
2019-08-30T13:13:39 <Info> phidget22usb[PhidgetUSBGetString()] : Device was unplugged - detach.
2019-08-30T13:13:39 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T13:13:40 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/10
2019-08-30T13:13:40 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T13:13:40 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): USB read thread started: 0xa84ff470
2019-08-30T13:28:16 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:16 <Info> phidget22usb[PhidgetUSBGetString()] : libusb_get_string_descriptor_ascii() failed: LIBUSB_ERROR_IO - Input/Output Error. Maybe detaching?
2019-08-30T13:28:16 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T13:28:16 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:16 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:16 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:16 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 5 times
2019-08-30T13:28:16 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538815): ReadThread exiting normally
2019-08-30T13:28:17 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/11
2019-08-30T13:28:17 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T13:28:17 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538815): USB read thread started: 0xa78ff470
2019-08-30T13:28:42 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:42 <Info> phidget22usb[PhidgetUSBGetString()] : libusb_get_string_descriptor_ascii() failed: LIBUSB_ERROR_IO - Input/Output Error. Maybe detaching?
2019-08-30T13:28:42 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T13:28:42 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:42 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:42 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:42 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
last message repeated 5 times
2019-08-30T13:28:42 <Info> phidget22usb[PhidgetUSBGetString()] : Device was unplugged - detach.
2019-08-30T13:28:42 <Warn> phidget22[scanVintDevices()] : Couldn't get VINT string from a Hub - maybe detaching.
2019-08-30T13:28:42 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:42 <ERROR> phidget22usb[PhidgetUSBReadPacket()] : libusb_interrupt_transfer() failed: LIBUSB_ERROR_PIPE - Pipe error.
2019-08-30T13:28:42 <Info> phidget22usb[PhidgetUSBReadPacket()] : Device was unplugged - detach.
2019-08-30T13:28:42 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): ReadThread exiting normally (Phidget detach detected in PhidgetDevice_read)
2019-08-30T13:28:43 <Info> phidget22usb[PhidgetUSBScanDevices()] : New Phidget found in PhidgetUSBBuildList: 2/12
2019-08-30T13:28:43 <Info> phidget22usb[getReportLengths()] : Using Control Endpoint for Host->Device communication.
2019-08-30T13:28:43 <Info> phidget22[PhidgetUSBReadThreadFunction()] : 6-Port USB VINT Hub Phidget(HUB0000) (538114): USB read thread started: 0xa84ff470
Re: servos becoming unattached after period of inactivity
Posted: Wed Sep 04, 2019 9:33 am
by Patrick
This is a lot of detaches. Could be caused by bad cables, or EMI.
Can you confirm that the USB VINT hubs were upgraded to version 125?
-Patrick
Re: servos becoming unattached after period of inactivity
Posted: Fri Sep 20, 2019 2:39 pm
by SecularSurfer
125?
Control panel is showing all the hubs are 121 with no firmware updates.