VINT HUB5000 Hardware Issues
Posted: Mon May 04, 2020 8:31 am
Hi,
I configured the 5 other hubs I have here exactly the same way and they all work flawlessly through their ethernet connections. These are the hardware problems I found after factory resets, software updates and identical configurations to above:
1- One hub shows up in the Phidgets tab of the PH Control Panel, but does not respond to any VINT devices being connected to it. Even after PC and hub restarts and multiple factory reset / updates.
2- the other hub shows up in the Phidgets tab of the PH Control Panel, but as soon as any VINT device is connected to it, it begins to 'flash' in the Control Panel. Even after PC and hub restarts and multiple factory reset / updates.
Am I missing something or should I just return these 2?
Dan
I configured the 5 other hubs I have here exactly the same way and they all work flawlessly through their ethernet connections. These are the hardware problems I found after factory resets, software updates and identical configurations to above:
1- One hub shows up in the Phidgets tab of the PH Control Panel, but does not respond to any VINT devices being connected to it. Even after PC and hub restarts and multiple factory reset / updates.
2- the other hub shows up in the Phidgets tab of the PH Control Panel, but as soon as any VINT device is connected to it, it begins to 'flash' in the Control Panel. Even after PC and hub restarts and multiple factory reset / updates.
Am I missing something or should I just return these 2?
Dan