I connect my VINT Hub Phidget on a MacBook and the Phidget Control Panel recognizes it fine. However, when I try to use one of the MaxMSP examples (PhidgetVoltageRatioInput.maxhelp) it gives me errors:
- print: deviceSerialNumber -1
- PhidgetVoltageInput_setVoltageRange() failed: (0x34) Device not Attached
- etc...
However, if I connect the Distance Phidget and open the patch PhidgetDistanceSensor.maxhelp, this patch works fine with the VINT Hub...
In order to open the VINT ports in Digital Input, Digital Output, Voltage Input, or Voltage Ratio Input modes, you need to set the IsHubPortDevice property to "true" before opening (this might have a slightly different name in Max/MSP).
SetVoltageRange in that example will still fail though, but you'll get "Unsupported" instead of "Device Not Attached" because SetVoltageRange is only for devices like the VCP1000.
Thanks! Problem solved.
Initially, I was trying to send a message (setIsHubPortDevice 1) to the [PhidgetVoltageRatioInput] object, but didn't change anything, although hitting (getIsHubDevice) will print 1=True in the Max Console.
Then, I tried to put the message as an argument in the object [PhidgetVoltageRatioInput ishubport=1], and immediately the VINT Hub got attached.
