Products for USB Sensing and Control
The i-Snail-VC is a self powered AC current transducer that provides a 0-5V dc analog signal proportional to the AC current flowing through the device wire window (sine wave RMS calibrated).
The i-Snail-VC is ideal for load monitoring without the need for an external power supply. Factory calibrated, fixed ranges ensure superior accuracy and eliminate configuration and adjustments in the field, saving time and avoiding confusion. Color coded labels allow for easy identification of full scale range.
The 13.7mm (0.54") wire window accommodates a conductor up to AWG #2. Multiple turns of the primary wire may be used to alter the input range. Output voltage is clamped at 6.5V, and the unit delivers a linear output up to 120% overload (6V).
Note: The i-Snail current transducer measures the current in a single AC wire (either the positive or the negative). If you put the whole cable through the window the + and - wires will cancel each other out and the sensor will read a null current value.
The formula for converting output voltage into AC Amps (RMS) is:
AC Amps (RMS) = V * 10This sensor connects to a Phidget InterfaceKit or Hub with a voltage input. See the Connection & Compatibility tab for details.
This sensor can be read by any Phidget with an Analog Input or VINT Hub port. It will connect to either one using a Phidget cable; see the diagram in the Phidget Cables section below for wiring instructions. VINT Hub ports can behave just like Analog Inputs, but have the added flexibility of being able to be used as digital inputs, digital outputs, or ports to communicate with VINT devices. For more information about VINT, see the VINT Overview page.
| Product | Voltage Inputs | ||
|---|---|---|---|
| Part Number | Price | Number of Voltage Inputs | Voltage Input Resolution (bits) |
 VINT Hub Phidget
|
$40.00 | 6 (Shared) | *** 15 bit |
 1-Port VINT Hub Phidget
|
$24.00 | 1 (Shared) | ** 16 bit |
 VINT Hub Phidget
|
$35.00 | 6 (Shared) | * 15 bit |
 VINT Hub Phidget
|
$30.00 | 6 (Shared) | *** 15 bit |
 Wireless VINT Hub
|
$60.00 | 6 (Shared) | * 16 bit |
 PhidgetSBC4
|
$120.00 | 6 (Shared) | * 16 bit |
 8x Voltage Input Phidget
|
$20.00 | 8 | 12 bit |
 PhidgetInterfaceKit 8/8/8
|
$80.00 | 8 | — |
 PhidgetInterfaceKit 2/2/2
|
$50.00 | 2 | 10 bit |
 PhidgetInterfaceKit 8/8/8
|
$80.00 | 8 | 10 bit |
 PhidgetInterfaceKit 8/8/8 Mini-Format
|
$70.00 | 8 | 10 bit |
 PhidgetInterfaceKit 8/8/8 w/6 Port Hub
|
$110.00 | 8 | 10 bit |
 PhidgetTextLCD 20X2 : White : Integrated PhidgetInterfaceKit 8/8/8
|
$70.00 | 8 | 10 bit |
To easily connect this sensor to a Phidget we recommend you use a Phidget cable. Just snip off the connector from one end of the Phidget cable and connect the ends to the sensor as shown below. You can solder multiple cables together in order to make even longer Phidget cables, but you should be aware of the effects of having long wires in your system.
|
 |
| Product | Physical Properties | |
|---|---|---|
| Part Number | Price | Cable Length |
 Phidget Cable 10cm
|
$1.50 | 100 mm |
 Phidget Cable 30cm
|
$1.75 | 300 mm |
 Phidget Cable 60cm
|
$2.00 | 600 mm |
 Phidget Cable 60cm
|
$2.00 | 600 mm |
 Phidget Cable 90cm
|
$2.00 | 900 mm |
 Phidget Cable 120cm
|
$2.25 | 1.2 m |
 Phidget Cable 150cm
|
$2.50 | 1.5 m |
 Phidget Cable 180cm
|
$2.75 | 1.8 m |
 Phidget Cable 350cm
|
$3.00 | 3.5 m |
 Phidget Cable Kit
|
$10.00 | 80 mm |
| Sensor Properties | |
|---|---|
| Sensor Type | Current (AC Through-Hole) |
| Controlled By | Voltage Input (0-5V) |
| Sensor Output Type | Non-Ratiometric |
| Input Current Min | 0 A |
| Input Current Max | 50 A |
| Current Measurement Resolution | 50 mA |
| Measurement Error Max | 0.5 % |
| Electrical Properties | |
| Output Voltage Min | 0 V DC |
| Output Voltage Max | 5 V DC |
| Isolation Voltage (AC) | 2.5 kV AC |
| Physical Properties | |
| Material | UL94V-0 ABS Plastic |
| Wire Window Size | 13.7 m |
| Operating Temperature Min | -40 °C |
| Operating Temperature Max | 50 °C |
| Customs Information | |
| Canadian HS Export Code | 9030.33.00 |
| American HTS Import Code | 9030.33.38.00 |
| Country of Origin | CA (Canada) |
| Product | Sensor Properties | |||||
|---|---|---|---|---|---|---|
| Part Number | Price | Sensor Type | Controlled By | Input Current Min | Input Current Max | Current Measurement Resolution |
 30A Current Sensor Phidget
|
$25.00 | Current (DC In-Line Hall Effect) | VINT | -30 A | 30 A | 1.1 mA |
 Clip-on Current Transducer 25A
|
$15.00 | Current (DC Clip-on) | Voltage Input (0-5V) | -25 A | 25 A | 10 mA |
 Clip-on Current Transducer 75A
|
$20.00 | Current (DC Clip-on) | Voltage Input (0-5V) | -75 A | 75 A | 10 mA |
 DC Current Sensor 0-10mA
|
$95.00 | Current (DC In-Line) | Voltage Input (0-5V) | 0 A | 10 mA | — |
 DC Current Transducer ±100A
|
$35.00 | Current (DC Through-Hole) | ±12V Adapter | -100 A | 100 A | 200 mA |
 DC Current Transducer ±250A
|
$35.00 | Current (DC Through-Hole) | ±12V Adapter | -250 A | 250 A | 500 mA |
 DC Current Transducer 0-100A
|
$35.00 | Current (DC Through-Hole) | ±12V Adapter | 0 A | 100 A | 100 mA |
 DC Current Transducer 0-250A
|
$35.00 | Current (DC Through-Hole) | ±12V Adapter | 0 A | 250 A | 250 mA |
 i-Snail AC Current Sensor 100Amp
|
$40.00 | Current (AC Through-Hole) | Voltage Input (0-5V) | 0 A | 100 A | 100 mA |
 i-Snail AC Current Sensor 10Amp
|
$40.00 | Current (AC Through-Hole) | Voltage Input (0-5V) | 0 A | 10 A | 10 mA |
 i-Snail AC Current Sensor 25Amp
|
$40.00 | Current (AC Through-Hole) | Voltage Input (0-5V) | 0 A | 25 A | 25 mA |
 i-Snail AC Current Sensor 50Amp
|
$40.00 | Current (AC Through-Hole) | Voltage Input (0-5V) | 0 A | 50 A | 50 mA |
 30 Amp Current Sensor AC/DC
|
$31.00 | Current (AC/DC In-Line) | VoltageRatio Input | ± 75 mA | ± 30 A | — |
