Linear Motion Guide
Linear systems involve mechanical parts sliding along a track, often driven by ball screws, chain, or belts. Learn the basics about linear motion here.
Products for USB Sensing and Control
Quantity Available: 25
| Qty | Price |
|---|---|
| 5 | $35.52 |
| 10 | $34.04 |
This 12mm ball screw gives you an option for precise linear positioning. Ball Screws have excellent repeatability, with very low backlash - they offer superior precision when compared to belt/chain based positioning systems.
These bearings can be put at the ends of a ball screw to securely mount and support it. There are different bearings for the drive and support ends of the screw. Have a look at the Linear Motion Guide for assembly details.
| Product | Look-Up Reference | |
|---|---|---|
| Part Number | Price | Ball Screw Series |
 Ball Screw Drive Bearing for SFU12 Ball Screws
|
$37.00 | SFU12 |
 Ball Screw Support Bearing for SFU12 Ball Screws
|
$14.80 | SFU12 |
A ball nut housing slips onto the narrow part of the ball nut in order to enable flush mounting perpendicular to the ball screw. Have a look at the Linear Motion Guide for assembly details.
| Product | Look-Up Reference | |
|---|---|---|
| Part Number | Price | Ball Screw Series |
 Ball Nut Housing for SFU12 Ball Screw
|
$7.05 | SFU12 |
If you need to connect the shaft of this ball screw to another device with a shaft, you can use a shaft coupler:
| Product | Physical Properties | |||||
|---|---|---|---|---|---|---|
| Part Number | Price | Inner Diameter | Material | Coupling Rated Torque | Coupling Rated Speed | Torsional Stiffness |
 Spiral Beam Coupling 8mm - 8mm
|
$3.35 | 8 mm | Aluminium | 10 kg·cm | 8000 RPM | 110 N·m/rad |
 Jaw Coupling Half 8mm Series 12
|
$3.00 | 8 mm | Aluminum | 35.7 kg·cm | 12000 RPM | — |
If you're building a rotary system that requires a lot of torque, you may be interested in pulleys and sprockets. By using a two pulleys or sprockets of different sizes, you can increase the gear ratio and thus increase the torque from the motor or device driving the system. Pulleys and sprockets can also be used to transmit the motor's rotation over a long distance. For more guidance on building a transmission system, visit our Rotary Motion Guide. Here is a list of our 8mm bore pulleys and sprockets:
| Product | Physical Properties | ||
|---|---|---|---|
| Part Number | Price | Inner Diameter | Number of Teeth |
 #25 Chain Sprocket with 8mm Bore and 10 Teeth
|
$3.00 | 8 mm | 10 |
 GT2 Idler Pulley 8mm Bore with Spacers
|
$5.50 | 8 mm | 44 |
 GT2 Idler Pulley with 8mm Bore and 44 Teeth
|
$1.75 | 8 mm | 44 |
 GT2 Pulley with 8mm Bore and 22 Teeth
|
$2.75 | 8 mm | 22 |
 GT2 Pulley with 8mm Bore and 32 Teeth
|
$2.50 | 8 mm | 32 |
 GT2 Pulley with 8mm Bore and 44 Teeth
|
$3.00 | 8 mm | 44 |
 GT2 Pulley with 8mm Bore and 60 Teeth
|
$3.00 | 8 mm | 60 |
 GT2 Pulley with 8mm Bore and 80 Teeth
|
$4.00 | 8 mm | 80 |
 GT5 Pulley with 8mm Bore and 12 Teeth
|
$3.00 | 8 mm | 12 |
 GT5 Pulley with 8mm Bore and 24 Teeth
|
$3.15 | 8 mm | 24 |
 GT5 Pulley with 8mm Bore and 34 Teeth
|
$4.45 | 8 mm | 34 |
 GT5 Pulley with 8mm Bore and 50 Teeth
|
$6.70 | 8 mm | 50 |
Systems with heavy loads or pulley/sprocket assemblies often put a lot of sideways strain on the motor shaft. If you're using such a system, you can use rotary bearings to protect the motor:
| Product | Physical Properties | Mechanical Properties | |||
|---|---|---|---|---|---|
| Part Number | Price | Inner Diameter | Bearing Type | Static Load | Dynamic Load |
 Flanged Rotary Bearing for 8mm Shaft (2pcs)
|
$4.00 | 8 mm | Rotary Shaft (Flanged) | 1.3 kN | 3.3 kN |
 Pillow Block Rotary Bearing for 8mm Shaft (2pcs)
|
$4.25 | 8 mm | Rotary Shaft (Pillow Block) | 1.3 kN | 3.3 kN |
| Look-Up Reference | |
|---|---|
| Manufacturer Part Number | SFU1204 |
| Physical Properties | |
| Static Load | 11.1 kN |
| Dynamic Load | 5.8 kN |
| Screw Lead | 4 mm |
| Length | 300 mm |
| Shaft Diameter | 8 mm |
| Screw Diameter | 12 mm |
| Customs Information | |
| Canadian HS Export Code | 8483.40.00 |
| American HTS Import Code | 8483.40.80.00 |
| Country of Origin | CN (China) |
| Product | Physical Properties | |
|---|---|---|
| Part Number | Price | Length |
 Ball Screw SFU01204 x 200mm w/Nut
|
$33.30 | 200 mm |
 Ball Screw SFU01204 x 300mm w/Nut
|
$37.00 | 300 mm |
 Ball Screw SFU01204 x 400mm w/Nut
|
$40.70 | 400 mm |
 Ball Screw SFU01204 x 500mm w/Nut
|
$44.40 | 500 mm |
 Ball Screw SFU01204 x 600mm w/Nut
|
$46.65 | 600 mm |
 Ball Screw SFU01204 x 800mm w/Nut
|
$53.30 | 800 mm |
 Ball Screw SFU01204 x 1000mm w/Nut
|
$59.20 | 1 m |