Products for USB Sensing and Control
Quantity Available: 20
| Qty | Price |
|---|---|
| 5 | $1.34 |
| 10 | $1.29 |
This jaw type half-coupling can be used to connect a 11mm shaft to another shaft. It is held in place by two set screws, and fits together with another series 12 jaw coupling of any shaft size with a hard elastomer spider in between.
Jaw type couplings are ideal for high-torque applications and applications where shafts of two different sizes need to be coupled. This series of couplers are rated for torques as high as 35 kg·cm and speeds of up to 12000 rpm.
This jaw type half-coupling connects to any other series 12 half-coupling with a coupling spider pressed in between. The other half and the spider are both sold separately.
You'll need a coupling spider to connect this jaw coupling to another. You can find a list of compatible spiders below:
| Product | Physical Properties | ||
|---|---|---|---|
| Part Number | Price | Material | Shore Hardness |
 Jaw Coupling Spider Series 12
|
$1.30 | Elastomer | 95-98A |
Jaw couplings are designed to connect to other jaws in the same series, which gives you the option of coupling two differently sized shafts together. Between the two jaw couplings, a coupling spider is used to hold them in place while still allowing for a small amount of flex. The jaw couplings in the list below will fit together with this coupling:
| Product | Physical Properties | |
|---|---|---|
| Part Number | Price | Inner Diameter |
 Jaw Coupling Half 4mm Series 12
|
$3.00 | 4 mm |
 Jaw Coupling Half 5mm Series 12
|
$3.50 | 5 mm |
 Jaw Coupling Half 6mm Series 12
|
$2.80 | 6 mm |
 Jaw Coupling Half 0.25" Series 12
|
$2.80 | 1⁄4″ |
 Jaw Coupling Half 8mm Series 12
|
$3.00 | 8 mm |
 Jaw Coupling Half 9mm Series 12
|
$1.40 | 9 mm |
 Jaw Coupling Half 10mm Series 12 - 3mm Keyway
|
$3.60 | 10 mm |
 Jaw Coupling Half 10mm Series 12 - 4mm Keyway
|
$3.60 | 10 mm |
 Jaw Coupling Half 11mm Series 12
|
$1.40 | 11 mm |
 Jaw Coupling Half 12mm Series 12
|
$3.60 | 12 mm |
This coupling can also fit onto the input shaft of the following worm gearboxes:
| Product | Gearbox Properties | |||
|---|---|---|---|---|
| Part Number | Price | Input Shaft Diameter | Gear Ratio | Maximum Strength of Gears |
 45Nm 40 Series Worm Gearbox 30:1
|
$62.90 | 11 mm | 30 : 1 | 45 N·m |
| Physical Properties | |
|---|---|
| Material | Aluminum |
| Coupling Rated Torque | 35.7 kg·cm |
| Coupling Rated Speed | 12000 RPM |
| Inner Diameter | 11 mm |
| Keyway Width | 4 mm |
| Hex Key Size Required | 2 mm |
| Customs Information | |
| Canadian HS Export Code | 8483.60.00 |
| American HTS Import Code | 8483.60.80.00 |
| Country of Origin | CN (China) |
